-
Notifications
You must be signed in to change notification settings - Fork 0
10G MAC Interface with registers
M_AXIS: Master AXI4-Stream (RX) bus, 64bit
S_AXIS: Slave AXI4-Stream (TX) bus, 64bit
S_AXI: Slave AXI4-Lite
M_AXIS_ERR: Master AXI4-Stream (ERR) bus, 0bit, [handshake only](Standard-IP-Interfaces)
C_XAUI_REVERSE: Must be 1 for Port 0, 1, 2; 0 for Port 3. Please consult the schematic for more information
C_XAUI_CONFIGURATION: XAUI configuration vector. See [Xilinx XAUI core documentation](http://www.xilinx.com/products/ipcenter/XAUI.htm) for more information.
C_XGMAC_CONFIGURATION: 10G Ethernet MAC configuration vector. See [Xilinx 10G Ethernet MAC core documentation](http://www.xilinx.com/products/ipcenter/DO-DI-10GEMAC.htm) for more information.
C_M_AXIS_DATA_WIDTH: Data width of the master AXI4-Stream (RX) bus. Must be 64
C_S_AXIS_DATA_WIDTH: Data width of the slave AXI4-Stream (TX) bus. Must be 64
C_BASEADDR: Base address value of the core.
C_HIGHADDR: High address value of the core.
0x0 : reset counters
0x4 : bad frames counter (from MAC side)
0x8 : good frames counter (from MAC side)
0xC : bytes send from MAC
0x10 : number of packets enqueued at the rx queues
0x14 : number of bytes enqueued at the rx queues
0x18 : number of packets dequeued at the rx queues
0x1c : number of bytes dequeued at the rx queues
0x20 : number of packets enqueued at the tx queues
0x24 : number of bytes enqueued at the tx queues
0x28 : number of packets dequeued at the tx queues
0x2c : number of bytes dequeued at the tx queues
0x30 : number of packets in the rx queue
0x34 : number of bytes in the rx queue
0x38 : number of packets in the tx queue
0x3c : number of bytes in the rx queue
0x40 : number of packets dropped at the rx queue
0x44 : number of bytes dropped at the rx queue
This pcore is a combination of Xilinx [XAUI](http://www.xilinx.com/products/ipcenter/XAUI.htm) and [10G MAC](http://www.xilinx.com/products/ipcenter/DO-DI-10GEMAC.htm) IP cores, in addition to an AXI4-Stream adapter. Incoming XAUI signals from AEL2005 are firstly transformed into XGMII signals by Xilinx XAUI core. The XGMII signals are read in by Xilinx 10G MAC and finally transformed into AXI4-Stream. The TX side follows the exact same path but in the opposite direction.
There is one additional AXI4-Stream bus for transmitting bad_frame signal provided by Xilinx 10G MAC. For more information about NetFPGA Standard IP Interfaces, please see [here](Standard-IP-Interfaces).
Note : The current implementation doesn’t have synchronization (for clock domain crossing) for registers which interface with the MAC.
To build a bistream with this core included, the end-user must obtain a license for the Xilinx 10G MAC. Universities can usually obtain a free license through the Xilinx University Program. Please follow the procedure as described in [Licensing](Licensing).
-
AXI Spec: [http://infocenter.arm.com/help/index.jsp?topic=/com.arm.doc.set.amba/index.html](http://infocenter.arm.com/help/index.jsp?topic=/com.arm.doc.set.amba/index.html)
-
Xilinx XAUI: [http://www.xilinx.com/products/ipcenter/XAUI.htm](http://www.xilinx.com/products/ipcenter/XAUI.htm)
-
Xilinx 10G MAC: [http://www.xilinx.com/products/ipcenter/DO-DI-10GEMAC.htm](http://www.xilinx.com/products/ipcenter/DO-DI-10GEMAC.htm)