Add ACPI methods for setting fan speed #143
Open
Conversation
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
curiousercreative
force-pushed
the
acpi-fans
branch
from
7e0677a to
8e13c09
Compare
This was referenced Oct 17, 2022
curiousercreative
force-pushed
the
acpi-fans
branch
from
8e13c09 to
5267c4d
Compare
curiousercreative
force-pushed
the
acpi-fans
branch
2 times, most recently
from
f01f927 to
8c7bec5
Compare
curiousercreative
force-pushed
the
acpi-fans
branch
from
8c7bec5 to
bb1a84d
Compare
curiousercreative
force-pushed
the
acpi-fans
branch
2 times, most recently
from
2c2f6ac to
3d53ebc
Compare
|
@jackpot51 This has been open a while; do you have an idea when it might be merged? This would be a great feature to have, and is widely desired if the number of thumbs on the following issues are any indication: pop-os/system76-acpi-dkms/issues/9 and system76/firmware-open#570. |
curiousercreative
force-pushed
the
acpi-fans
branch
2 times, most recently
from
92304b9 to
77514ed
Compare
|
freshly rebased and tested on my galp5 |
Signed-off-by: Tim Crawford <[email protected]> Change-Id: If03415f80a6028e263e76a9e3cc10df0cde5cc3c
Change-Id: Icc4a882ff73f62a134b92f1afb0dc298ea809189 Signed-off-by: Jeremy Soller <[email protected]>
Change-Id: Id7f4373989dffe8c3bc68a034f59a94d2160dd15 Signed-off-by: Jeremy Soller <[email protected]>
The Infineon SLB 9672 on newer Clevo machines regularly fails TPM Resume on S3 with the error `TPM_RC_VALUE`. Per TPM2 spec, handle the failure by performing a TPM Restart. > The startup behavior defined by this specification is different than > TPM 1.2 with respect to Startup(STATE). A TPM 1.2 device will enter > Failure Mode if no state is available when the TPM receives > Startup(STATE). This is not the case in this specification. It is up > to the CRTM to take corrective action if it the TPM returns > TPM_RC_VALUE in response to Startup(STATE). Fixes the following error from being repeatedly logged in Linux: > kernel: tpm tpm0: A TPM error (256) occurred attempting get random Ref: Trusted Platform Module Library, Part 1: Architecture, rev 1.59 Change-Id: I3388007d4448c93bd0dda591c8ca7d1a8dc5306b Signed-off-by: Tim Crawford <[email protected]>
Retry calling the SMI 5 times in case the initial write to APM did not cause SMM entry immediately. Fixes occasional SMMSTORE initialization failure on Clevo NV4xPZ with Intel i5-1240P processor. The issue was especially evident when all logging in coreboot was disabled. Based on SMMSTORE implementation in MrChromebox's fork of EDK2: MrChromebox/edk2@27854bc Change-Id: I8929af25c4f69873bbdd835fde5cb60fc324b6ab Signed-off-by: Michał Kopeć <[email protected]>
Change-Id: Ie70905d34a4050aeff4b5cda116eb700f19a18ea
DDR5 uses a Serial Presence Detect EEPROM with hub function (SPD5 hub device) to store the spd data. This CL adds support to read the spd5 hub device via smbus. BUG=b:180458099 TEST=Boot adlrvp DDR5 board to kernel Signed-off-by: Meera Ravindranath <[email protected]> Change-Id: Ic5e6c58f255bef86b68ce90a4f853bf4e7c7ccfe
CB:52731 introduced support for reading SPD from the EEPROM via SMBus. Replace the now unneeded workaround for DDR5 with filling in the correct channels for DDR5. Change-Id: I5a92199a7cd2718e9396f0dac8257df40e4f834c Signed-off-by: Jeremy Soller <[email protected]> Signed-off-by: Tim Crawford <[email protected]>
Change-Id: I8bdc4c676a0f571fd8f34e078f6a1c73a2e90a87 Signed-off-by: Jeremy Soller <[email protected]> Signed-off-by: Tim Crawford <[email protected]>
Add a new driver for discrete Thunderbolt controllers. This allows using Maple Ridge devices on Raptor Point PCH. Change-Id: Ib78ce43740956fa2c93b9ebddb0eeb319dcc0364 Signed-off-by: Jeremy Soller <[email protected]> Signed-off-by: Tim Crawford <[email protected]>
The HX board, using PCH-S, use a discrete Thunderbolt device (Intel Maple Ridge), as opposed to a built-in one like the boards using PCH-P. Fixes Thunderbolt on RPL-HX boards using the Maple Ridge controller. Change-Id: I53d18f3ec5a084431e1113782c791bcb42728350 Signed-off-by: Tim Crawford <[email protected]>
The Bonobo has 2 AMPs: one for the speakers and one for the subwoofer. Smart AMP data was collected using a logic analyzer connected to the IC during system start on proprietary firmware. This data is then used to generate a C file [1]. [1]: https://github.com/system76/smart-amp Change-Id: I5389a9890563ebd3adb20096b6225f474bc006f9 Signed-off-by: Tim Crawford <[email protected]>
Device 0:01.1 does not exist on ADL-P. I assume this works because the
bridged device has function 1.
Fixes the following error in Linux:
pcieport 0000:00:01.0: can't derive routing for PCI INT B
snd_hda_intel 0000:01:00.1: PCI INT B: no GSI - using ISA IRQ 10
Which in turn resolves the conflict with the PCH HDA device...again:
irq 10: nobody cared (try booting with the "irqpoll" option)
<snip>
[<00000000bf549647>] azx_interrupt [snd_hda_codec]
Disabling IRQ system76#10
Change-Id: I9d9a0003764a1e031be578c1f406b2a5d7512de7
Signed-off-by: Tim Crawford <[email protected]>
Add a driver for laptops with NVIDIA Optimus (hybrid) graphics. The driver provides ACPI support for dynamically powering on and off the GPU, NVIDIA Dynamic Boost support, and a function for enabling the GPU power in romstage. References: - DG-09845-001: NVIDIA GN20/QN20 Hardware Design Guide - DG-09954-001: NVIDIA GN20/QN20 Software Design Guide Change-Id: I2dec7aa2c8db7994f78a7cc1220502676e248465 Signed-off-by: Jeremy Soller <[email protected]> Signed-off-by: Tim Crawford <[email protected]>
Change-Id: I28fe45afaccd60621f2f2456af14306e18df2657 Signed-off-by: Tim Crawford <[email protected]>
Change-Id: I202c0607c2cdac1df59f42fb41735704dd5bd95c Signed-off-by: Jeremy Soller <[email protected]> Signed-off-by: Tim Crawford <[email protected]>
Change-Id: I4b07846c404eb93ab4baf0a78a4bbffcc5d8afca Signed-off-by: Tim Crawford <[email protected]>
The newer batch of these boards do not de-assert VW PLTRST# on S3 resume, causes the units to not power on in the EC code. Switch them to S0ix by default, but leave S3 available. Change-Id: I95337c1391102db9e020e82bdd938659c1a4f905 Signed-off-by: Tim Crawford <[email protected]>
Since these boards will use S0ix they need to leave CSME enabled for the CPU to reach C10. Change-Id: I70c908402c9964508bb9c439d48d24773f5a35ab Signed-off-by: Tim Crawford <[email protected]>
Some drives block the CPU from reaching C10 on suspend without the RTD3 config. Fixes suspend with the following drives: - Kingston KC3000 (SKC3000D/4096G) - Kingston HyperX (SHPM2280P2H/240G) - Solidigm P44 Pro (SSDPFKKW010X7) The following drives continue to work: - Samsung 970 Evo (MZVLB250HAHQ) - WD Black SN770 (WDS250G3X0E) - WD Green SN350 (WDS240G2G0C-00AJM0) - WD Blue SN570 (WDS100T3B0C) Change-Id: I205d78377fa2b0db8d37542cdb94ba86ded1d66e Signed-off-by: Tim Crawford <[email protected]> Tested-by: Levi Portenier <[email protected]>
curiousercreative
force-pushed
the
acpi-fans
branch
from
77514ed to
af3f892
Compare
Change-Id: Ib6548c571de300cec476f06f526d4c032e438f34
curiousercreative
force-pushed
the
acpi-fans
branch
from
af3f892 to
2823ddd
Compare
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
Add this suggestion to a batch that can be applied as a single commit.
This suggestion is invalid because no changes were made to the code.
Suggestions cannot be applied while the pull request is closed.
Suggestions cannot be applied while viewing a subset of changes.
Only one suggestion per line can be applied in a batch.
Add this suggestion to a batch that can be applied as a single commit.
Applying suggestions on deleted lines is not supported.
You must change the existing code in this line in order to create a valid suggestion.
Outdated suggestions cannot be applied.
This suggestion has been applied or marked resolved.
Suggestions cannot be applied from pending reviews.
Suggestions cannot be applied on multi-line comments.
Suggestions cannot be applied while the pull request is queued to merge.
Suggestion cannot be applied right now. Please check back later.
Relates to