v0.2-beta
Full Changelog: v0.1-beta...v0.2-beta
- Add RTL8812BU, RTL8812CU/RTL8822CU, RTL8814AU, RTL8731BU/RTL8733BU, AR9271 support.
- Start or stop recording without interrupting the video with PixelPilot.
- Add OpenIPC wallpaper.
- Show initial startup warning message on tty1 and ttyFIQ0.
Wiring Diagram( RubyFPV compatible )
- Q 1: Start / Stop record
- Q 2: Change OTG port mode between host and device
- Q 3: Change WiFi mode between station and hotspot on Radxa Zero 3W
Recommended GPIO Functions
| Recommended Function#1 | Pin#1 | Pin#2 | Recommended Function#2 |
|---|---|---|---|
| +3.3V | 1 | 2 | +5.0V |
| UART3_RX_M0 | 3 | 4 | +5.0V |
| UART3_TX_M0 | 5 | 6 | GND |
| PWM14_M0 | 7 | 8 | UART2_TX_M0 |
| GND | 9 | 10 | UART2_RX_M0 |
| GPIO3_A1 | 11 | 12 | GPIO3_A3 |
| GPIO3_A2 | 13 | 14 | GND |
| GPIO3_B0 | 15 | 16 | PWM8_M0 / UART4_RX_M1 |
| +3.3V | 17 | 18 | PWM9_M0 / UART4_TX_M1 |
| SPI3_MOSI_M1 / PWM15_IR_M1 | 19 | 20 | GND |
| SPI3_MISO_M1 / UART9_TX_M1 | 21 | 22 | GPIO3_C1 |
| SPI3_CLK_M1 / PWM14_M1 | 23 | 24 | SPI3_CS0_M1 / UART9_RX_M1 |
| GND | 25 | 26 | NC |
| I2C4_SDA_M0 / USB D+ | 27 | 28 | I2C4_SCL_M0 / USB D- |
| GPIO3_B3 | 29 | 30 | GND |
| GPIO3_B4 | 31 | 32 | UART5_TX_M1 |
| UART5_RX_M1 | 33 | 34 | GND |
| GPIO3_A4 | 35 | 36 | GPIO3_A7 |
| GPIO1_A4 | 37 | 38 | GPIO3_A6 |
| GND | 39 | 40 | GPIO3_A5 |