fix(deps): update module go.opentelemetry.io/collector/consumer to v0.114.0

[renovate]

This PR contains the following updates:

Package	Change	Age	Adoption	Passing	Confidence
go.opentelemetry.io/collector/consumer	v0.106.1 -> v0.114.0

---

Release Notes

open-telemetry/opentelemetry-collector (go.opentelemetry.io/collector/consumer)

v0.114.0

Compare Source

💡 Enhancements 💡

• cmd/builder: Allow for replacing of local Providers and Converters when building custom collector with ocb. (#​11649)
  Use the property path under gomod to replace an go module with a local folder in
  builder-config.yaml. Ex:
  providers:
  - gomod: module.url/my/custom/provider v1.2.3
  path: /path/to/local/provider

• cmd/builder: Allow configuring confmap.Converter components in ocb. (#​11582)
  If no converters are specified, there will be no converters added.
  Currently, the only published converter is expandconverter which is
  deprecated as of v0.107.0, but can still be added for testing purposes.

  To configure a custom converter, make sure your converter implements the converter
  interface and is published as a go module (or replaced locally if not published).
  You may then use the converters key in your OCB build manifest with a list of
  Go modules (and replaces as necessary) to include your converter.

  Please note that converters are order-dependent. The confmap will apply converters
  in order of which they are listed in your manifest if there is more than one.

• all: shorten time period before removing an unmaintained component from 6 months to 3 months (#​11664)

🧰 Bug fixes 🧰

• all: Updates dialer timeout section documentation in confignet README (#​11685)
• scraperhelper: If the scraper shuts down, do not scrape first. (#​11632)
  When the scraper is shutting down, it currently will scrape at least once.
  With this change, upon receiving a shutdown order, the receiver's scraperhelper will exit immediately.

v0.113.0

Compare Source

🛑 Breaking changes 🛑

• internal/fanoutconsumer: Extract internal/fanoutconsumer as a separate go module (#​11441)
• builder: Remove builder support to build old version, and the otelcol_version config (#​11405)
  User should remove this property from their config, to build older versions use older builders.
• receiver: Make receivertest into its own module (#​11462)
• builder: Remove deprecated flags from Builder (#​11576)
  Here is the list of flags | --name, --description, --version, --otelcol-version, --go, --module
• internal/sharedcomponent: Extract internal/sharedcomponent as a separate go module (#​11442)

💡 Enhancements 💡

• mdatagen: Add otlp as supported distribution (#​11527)
• batchprocessor: Move single shard batcher creation to the constructor (#​11594)
• service: add support for using the otelzap bridge and emit logs using the OTel Go SDK (#​10544)

🧰 Bug fixes 🧰

• service: ensure traces and logs emitted by the otel go SDK use the same resource information (#​11578)
• config/configgrpc: Patch for bug in the grpc-go NewClient that makes the way the hostname is resolved incompatible with the way proxy setting are applied. (#​11537)
• builder: Update builder default providers to lastest stable releases (#​11566)

v0.112.0

Compare Source

🛑 Breaking changes 🛑

• consumer/consumererror: Extract consumer/consumererror as a separate go module (#​11440)
• exporter/expotertest: Put expotertest into its own module (#​11461)
• service: Remove stable gate component.UseLocalHostAsDefaultHost (#​11412)

🚩 Deprecations 🚩

• processortest: Deprecated 'NewUnhealthyProcessorCreateSettings'. Use NewNopSettings instead. (#​11307)

💡 Enhancements 💡

• mdatagen: Added generated_package_name config field to support custom generated package name. (#​11231)
• mdatagen: Generate documentation for components with resource attributes only (#​10705)
• confighttp: Adding support for lz4 compression into the project (#​9128)
• service: Hide profiles support behind a feature gate while it remains alpha. (#​11477)
• exporterhelper: Retry sender will fail fast when the context timeout is shorter than the next retry interval. (#​11183)

🧰 Bug fixes 🧰

• cmd/builder: Fix default configuration for builder for httpprovider, httpsprovider, and yamlprovider. (#​11357)
• processorhelper: Fix issue where in/out parameters were not recorded when error was returned from consumer. (#​11351)

v0.111.0

Compare Source

🛑 Breaking changes 🛑

• service/telemetry: Change default metrics address to "localhost:8888" instead of ":8888" (#​11251)
  This behavior can be disabled by disabling the feature gate 'telemetry.UseLocalHostAsDefaultMetricsAddress'.
• loggingexporter: Removed the deprecated logging exporter. Use the debug exporter instead. (#​11037)

🚩 Deprecations 🚩

• service/telemetry: Deprecate service::telemetry::metrics::address in favor of service::telemetry::metrics::readers. (#​11205)
• processorhelper: Deprecate BuildProcessorMetricName as it's no longer needed since introduction of mdatagen (#​11302)

💡 Enhancements 💡

• ocb: create docker images for OCB, per https://github.com/open-telemetry/opentelemetry-collector-releases/pull/671 (#​5712)
  Adds standard Docker images for OCB to Dockerhub and GitHub, see hub.docker.com/r/otel/opentelemetry-collector-builder
• confighttp: Snappy compression to lazy read for memory efficiency (#​11177)
• httpsprovider: Mark the httpsprovider as stable. (#​11191)
• httpprovider: Mark the httpprovider as stable. (#​11191)
• yamlprovider: Mark the yamlprovider as stable. (#​11192)
• confmap: Allow using any YAML structure as a string when loading configuration including time.Time formats (#​10659)
  Previously, fields with time.Time formats could not be used as strings in configurations

🧰 Bug fixes 🧰

• processorhelper: Fix data race condition, concurrent writes to the err variable, causes UB (Undefined Behavior) (#​11350)
• cmd/builder: re-adds function to properly set and view version number of OpenTelemetry Collector Builder (ocb) binaries (#​11208)
• pdata: Unmarshal Span and SpanLink flags from JSON (#​11267)

v0.110.0

Compare Source

🛑 Breaking changes 🛑

• processorhelper: Update incoming/outgoing metrics to a single metric with a otel.signal attributes. (#​11144)
  The following metrics were added in the previous version
  • otelcol_processor_incoming_spans
  • otelcol_processor_outgoing_spans
  • otelcol_processor_incoming_metric_points
  • otelcol_processor_outgoing_metric_points
  • otelcol_processor_incoming_log_records
  • otelcol_processor_outgoing_log_records
    They are being replaced with the following to more closely align with OTEP 259:
  • otelcol_processor_incoming_items
  • otelcol_processor_outgoing_items
• processorhelper: Remove deprecated [Traces|Metrics|Logs]Inserted funcs (#​11151)
• config: Mark UseLocalHostAsDefaultHostfeatureGate as stable (#​11235)

🚩 Deprecations 🚩

• processorhelper: deprecate accepted/refused/dropped metrics (#​11201)
  The following metrics are being deprecated as they were only used in a single
  processor:
  • otelcol_processor_accepted_log_records
  • otelcol_processor_accepted_metric_points
  • otelcol_processor_accepted_spans
  • otelcol_processor_dropped_log_records
  • otelcol_processor_dropped_metric_points
  • otelcol_processor_dropped_spans
  • otelcol_processor_refused_log_records
  • otelcol_processor_refused_metric_points
  • otelcol_processor_refused_spans

💡 Enhancements 💡

• pdata: Add support to MoveTo for Map, allow avoiding copies (#​11175)
• mdatagen: Add stability field to telemetry metrics, allowing the generated description to include a stability string. (#​11160)
• confignet: Mark module as Stable. (#​9801)
• confmap/provider/envprovider: Support default values when env var is empty (#​5228)
• mdatagen: mdatagen validateMetrics() support validate metrics in telemetry.metric (#​10925)
• service/telemetry: Mark useOtelWithSDKConfigurationForInternalTelemetry as stable (#​7532)
• mdatagen: Use cobra for the command, add version flag (#​11196)

🧰 Bug fixes 🧰

• service: Ensure process telemetry is registered when internal telemetry is configured with readers instead of an address. (#​11093)

• mdatagen: Fix incorrect generation of metric tests with boolean attributes. (#​11169)

• otelcol: Fix the Windows Event Log configuration when running the Collector as a Windows service. (#​5297, #​11051)

• builder: Honor build_tags in config (#​11156)

• builder: Fix version for providers in the default config (#​11123)

• cmd/builder: Temporarily disable strict versioning checks (#​11129, #​11152)
  The strict versioning check may be enabled by default in a future version once all configuration providers are stabilized.

• confmap: Fix loading config of a component from a different source. (#​11154)
  This issue only affected loading the whole component config, loading parts of a component config from a different source was working correctly.

v0.109.0

Compare Source

🛑 Breaking changes 🛑

• scraperhelper: Remove deprecated ObsReport, ObsReportSettings, NewObsReport types/funcs (#​11086)
• confmap: Remove stable confmap.strictlyTypedInput gate (#​11008)
• confmap: Removes stable confmap.unifyEnvVarExpansion feature gate. (#​11007)
• ballastextension: Removes the deprecated ballastextension (#​10671)
• service: Removes stable service.disableOpenCensusBridge feature gate (#​11009)

🚩 Deprecations 🚩

• processorhelper: These funcs are not used anywhere, marking them deprecated. (#​11083)

🚀 New components 🚀

• extension/experimental/storage: Move extension/experimental/storage into a separate module (#​11022)

💡 Enhancements 💡

• configtelemetry: Add guidelines for each level of component telemetry (#​10286)

• service: move useOtelWithSDKConfigurationForInternalTelemetry gate to beta (#​11091)

• service: implement a no-op tracer provider that doesn't propagate the context (#​11026)
  The no-op tracer provider supported by the SDK incurs a memory cost of propagating the context no matter
  what. This is not needed if tracing is not enabled in the Collector. This implementation of the no-op tracer
  provider removes the need to allocate memory when tracing is disabled.

• envprovider: Mark module as stable (#​10982)

• fileprovider: Mark module as stable (#​10983)

• processor: Add incoming and outgoing counts for processors using processorhelper. (#​10910)
  Any processor using the processorhelper package (this is most processors) will automatically report
  incoming and outgoing item counts. The new metrics are:

  • otelcol_processor_incoming_spans
  • otelcol_processor_outgoing_spans
  • otelcol_processor_incoming_metric_points
  • otelcol_processor_outgoing_metric_points
  • otelcol_processor_incoming_log_records
  • otelcol_processor_outgoing_log_records

🧰 Bug fixes 🧰

• configgrpc: Change the value of max_recv_msg_size_mib from uint64 to int to avoid a case where misconfiguration caused an integer overflow. (#​10948)
• exporterqueue: Fix a bug in persistent queue that Offer can becomes deadlocked when queue is almost full (#​11015)

v0.108.1

Compare Source

🧰 Bug fixes 🧰

• mdatagen: Fix a missing import in the generated test file (#​10969)

v0.108.0

Compare Source

🛑 Breaking changes 🛑

• all: Added support for go1.23, bumped the minimum version to 1.22 (#​10869)
• otelcol: Remove deprecated ConfmapProvider interface. (#​10934)
• confmap: Mark confmap.strictlyTypedInput as stable (#​10552)

💡 Enhancements 💡

• exporter/otlp: Add batching option to otlp exporter (#​8122)
• builder: Add a --skip-new-go-module flag to skip creating a module in the output directory. (#​9252)
• component: Add TelemetrySettings.LeveledMeterProvider func to replace MetricsLevel in the near future (#​10931)
• mdatagen: Add LeveledMeter method to mdatagen (#​10933)
• service: Adds level configuration option to service::telemetry::trace to allow users to disable the default TracerProvider (#​10892)
  This replaces the feature gate service.noopTracerProvider introduced in v0.107.0
• componentstatus: Add new Reporter interface to define how to report a status via a component.Host implementation (#​10852)
• mdatagen: support using a different github project in mdatagen README issues list (#​10484)
• mdatagen: Updates mdatagen's usage to output a complete command line example, including the metadata.yaml file. (#​10886)
• extension: Add ModuleInfo to extension.Settings to allow extensions to access component go module information. (#​10876)
• confmap: Mark module as stable (#​9379)

🧰 Bug fixes 🧰

• batchprocessor: Update units for internal telemetry (#​10652)
• confmap: Fix bug where an unset env var used with a non-string field resulted in a panic (#​10950)
• service: Fix memory leaks during service package shutdown (#​9165)
• mdatagen: Update generated telemetry template to only include context import when there are async metrics. (#​10883)
• mdatagen: Fixed bug in which setting SkipLifecycle & SkipShutdown to true would result in a generated file with an unused import confmaptest (#​10866)
• confmap: Use string representation for field types where all primitive types are strings. (#​10937)
• otelcol: Preserve internal representation when unmarshaling component configs (#​10552)

v0.107.0

Compare Source

🛑 Breaking changes 🛑

• service: Remove OpenCensus bridge completely, mark feature gate as stable. (#​10414)
• confmap: Set the confmap.unifyEnvVarExpansion feature gate to Stable. Expansion of $FOO env vars is no longer supported. Use ${FOO} or ${env:FOO} instead. (#​10508)
• service: Remove otelcol from Prometheus configuration. This means that any metric that isn't explicitly prefixed with otelcol_ no longer have that prefix. (#​9759)

💡 Enhancements 💡

• mdatagen: export ScopeName in internal/metadata package (#​10845)
  This can be used by components that need to set their scope name manually. Will save component owners from having to store a variable, which may diverge from the scope name used by the component for emitting its own telemetry.

• semconv: Add v1.26.0 semantic conventions package (#​10249, #​10829)

• mdatagen: Expose a setting on tests::host to set up your own host initialization code (#​10765)
  Some receivers require a host that has additional capabilities such as exposing exporters.
  For those, we can expose a setting that allows them to place a different host in the generated code.

• confmap: Allow using any YAML structure as a string when loading configuration. (#​10800)
  Previous to this change, slices could not be used as strings in configuration.

• ocb: migrate build and release of ocb binaries to opentelemetry-collector-releases repository (#​10710)
  ocb binaries will now be released under open-telemetry/opentelemetry-collector-releases tagged as "cmd/builder/vX.XXX.X"

• semconv: Add semantic conventions version v1.27.0 (#​10837)

• client: Mark module as stable. (#​10775)

🧰 Bug fixes 🧰

• configtelemetry: Add 10s read header timeout on the configtelemetry Prometheus HTTP server. (#​5699)

• service: Allow users to disable the tracer provider via the feature gate service.noopTracerProvider (#​10858)
  The service is returning an instance of a SDK tracer provider regardless of whether there were any processors configured causing resources to be consumed unnecessarily.

• processorhelper: Fix processor metrics not being reported initially with 0 values. (#​10855)

• service: Implement the temporality_preference setting for internal telemetry exported via OTLP (#​10745)

• configauth: Fix unmarshaling of authentication in HTTP servers. (#​10750)

• confmap: If loading an invalid YAML string through a provider, use it verbatim instead of erroring out. (#​10759)
  This makes the ${env:ENV} syntax closer to how ${ENV} worked before unifying syntaxes.

• component: Allow component names of up to 1024 characters in length. (#​10816)

• confmap: Remove original string representation if invalid. (#​10787)

---

Configuration

📅 Schedule: Branch creation - At any time (no schedule defined), Automerge - At any time (no schedule defined).

🚦 Automerge: Disabled by config. Please merge this manually once you are satisfied.

♻ Rebasing: Whenever PR becomes conflicted, or you tick the rebase/retry checkbox.

🔕 Ignore: Close this PR and you won't be reminded about this update again.

---

• If you want to rebase/retry this PR, check this box

---

This PR was generated by Mend Renovate. View the repository job log.

[renovate]

ℹ Artifact update notice

File name: exporter/discordexporter/go.mod

In order to perform the update(s) described in the table above, Renovate ran the go get command, which resulted in the following additional change(s):

• 8 additional dependencies were updated
• The go directive was updated for compatibility reasons

Details:

Package	Change
go	1.21.5 -> 1.23.3
go.opentelemetry.io/collector/pdata	v1.12.0 -> v1.20.0
golang.org/x/crypto	v0.24.0 -> v0.26.0
golang.org/x/net	v0.26.0 -> v0.28.0
golang.org/x/sys	v0.22.0 -> v0.24.0
golang.org/x/text	v0.16.0 -> v0.17.0
google.golang.org/genproto/googleapis/rpc	v0.0.0-20240701130421-f6361c86f094 -> v0.0.0-20240814211410-ddb44dafa142
google.golang.org/grpc	v1.65.0 -> v1.67.1
google.golang.org/protobuf	v1.34.2 -> v1.35.1

File name: receiver/discordreceiver/go.mod

In order to perform the update(s) described in the table above, Renovate ran the go get command, which resulted in the following additional change(s):

• 8 additional dependencies were updated
• The go directive was updated for compatibility reasons

Details:

Package	Change
go	1.21.5 -> 1.23.3
go.opentelemetry.io/collector/pdata	v1.12.0 -> v1.20.0
golang.org/x/crypto	v0.24.0 -> v0.26.0
golang.org/x/net	v0.26.0 -> v0.28.0
golang.org/x/sys	v0.21.0 -> v0.24.0
golang.org/x/text	v0.16.0 -> v0.17.0
google.golang.org/genproto/googleapis/rpc	v0.0.0-20240701130421-f6361c86f094 -> v0.0.0-20240814211410-ddb44dafa142
google.golang.org/grpc	v1.65.0 -> v1.67.1
google.golang.org/protobuf	v1.34.2 -> v1.35.1

File name: receiver/slackreceiver/go.mod

In order to perform the update(s) described in the table above, Renovate ran the go get command, which resulted in the following additional change(s):

• 7 additional dependencies were updated
• The go directive was updated for compatibility reasons

Details:

Package	Change
go	1.21.5 -> 1.23.3
go.opentelemetry.io/collector/pdata	v1.12.0 -> v1.20.0
golang.org/x/net	v0.26.0 -> v0.28.0
golang.org/x/sys	v0.21.0 -> v0.24.0
golang.org/x/text	v0.16.0 -> v0.17.0
google.golang.org/genproto/googleapis/rpc	v0.0.0-20240701130421-f6361c86f094 -> v0.0.0-20240814211410-ddb44dafa142
google.golang.org/grpc	v1.65.0 -> v1.67.1
google.golang.org/protobuf	v1.34.2 -> v1.35.1