Smogly(formerly: Smogomierz) - simple and cheap PM 2.5 and PM10 sensor based on NodeMCU (ESP8266) or ESP32

Sensirion SPS30 driver for ESP32, SODAQ, MEGA2560, UNO,UNO-R4 ESP8266, Particle-photon on UART OR I2C coummunication

Arduino library for Sensirion SPS30

Embedded i2c Driver for Sensirion Particulate Matter Sensors - Download the Zip Package from the Release Page

Embedded UART Driver for Sensirion Particulate Matter Sensors - Download the Zip Package from the Release Page

SPS30 full function driver library for general MCU and Linux.

Data acquisition and logging for Air Quality Sensors with UART interface

Python-based driver for Sensirion SPS30 particulate matter sensor. Tested on Raspberry Pi Zero/Zero W/3B+/4B.

SPS30 PM Sensor I2C Driver for Python3

SPS30 connected to Raspberry Pi

An attempt to measure indoor airquality with ESP8266. Temperature, Pressure, Humidity, tVOC, CO2 and particulate matter.

Air Quality sensor using ESP-IDF

Measures levels of PM2.5, PM10 and CO2 as well as humidity and temperature. Sends data via MQTT to Node-RED, InfluxDB and Grafana.

ioBroker IoT Framework (based on NodeMCU ESP8266)

SPS30 / SEN5x Air Quality Monitor

Air Quality Sensor using ESP32 with sensors SPS30, BME680 and OLED SSH1106 output + DashBoard WebServer + Logging to ThingSpeak

Linux Kernel Driver for Sensirion SPS30. External module based on the upstream sps30 driver that is backported to older kernels

Set parameters and read and calculate values from SVM30 on Raspberry Pi

C# Client for Sensirion SPS30 particulate matter sensor

SPS30 with Feather Lora 32U4 connected to TTN & Luftdaten