Add ikfast plugin for Kuka cybertech kr16 r1610

kuka_cybertech_kr16_r1610_moveit_config/.setup_assistant

@@ -0,0 +1,11 @@
+moveit_setup_assistant_config:
+  URDF:
+    package: kuka_cybertech_kr16_r1610_support
+    relative_path: urdf/kr16_r1610.urdf
+    xacro_args: "--inorder "
+  SRDF:
+    relative_path: config/kuka_kr16_r1610.srdf
+  CONFIG:
+    author_name: Simon Schmeißer
+    author_email: [email protected]
+    generated_timestamp: 1537538591

kuka_cybertech_kr16_r1610_moveit_config/CMakeLists.txt

@@ -0,0 +1,10 @@
+cmake_minimum_required(VERSION 2.8.3)
+project(kuka_cybertech_kr16_r1610_moveit_config)
+
+find_package(catkin REQUIRED)
+
+catkin_package()
+
+install(DIRECTORY launch DESTINATION ${CATKIN_PACKAGE_SHARE_DESTINATION}
+  PATTERN "setup_assistant.launch" EXCLUDE)
+install(DIRECTORY config DESTINATION ${CATKIN_PACKAGE_SHARE_DESTINATION})

kuka_cybertech_kr16_r1610_moveit_config/config/controllers.yaml

@@ -0,0 +1,5 @@
+controller_list:
+  - name: ""
+    action_ns: joint_trajectory_action
+    type: FollowJointTrajectory
+    joints: [joint_a1, joint_a2, joint_a3, joint_a4, joint_a5, joint_a6]

kuka_cybertech_kr16_r1610_moveit_config/config/fake_controllers.yaml

@@ -0,0 +1,4 @@
+controller_list:
+  - name: fake_manipulator_controller
+    joints:
+      []

kuka_cybertech_kr16_r1610_moveit_config/config/joint_limits.yaml

@@ -0,0 +1,5 @@
+# joint_limits.yaml allows the dynamics properties specified in the URDF to be overwritten or augmented as needed
+# Specific joint properties can be changed with the keys [max_position, min_position, max_velocity, max_acceleration]
+# Joint limits can be turned off with [has_velocity_limits, has_acceleration_limits]
+joint_limits:
+  {}

kuka_cybertech_kr16_r1610_moveit_config/config/kinematics.yaml

@@ -0,0 +1,5 @@
+manipulator:
+  kinematics_solver: kuka_cybertech_kr16_r1610_manipulator_kinematics/IKFastKinematicsPlugin
+  kinematics_solver_attempts: 3
+  kinematics_solver_search_resolution: 0.005
+  kinematics_solver_timeout: 0.005

kuka_cybertech_kr16_r1610_moveit_config/config/kuka_kr16_r1610.srdf

@@ -0,0 +1,28 @@
+<?xml version="1.0" ?>
+<!--This does not replace URDF, and is not an extension of URDF.
+    This is a format for representing semantic information about the robot structure.
+    A URDF file must exist for this robot as well, where the joints and the links that are referenced are defined
+-->
+<robot name="kuka_cybertech_kr16_r1610">
+    <!--GROUPS: Representation of a set of joints and links. This can be useful for specifying DOF to plan for, defining arms, end effectors, etc-->
+    <!--LINKS: When a link is specified, the parent joint of that link (if it exists) is automatically included-->
+    <!--JOINTS: When a joint is specified, the child link of that joint (which will always exist) is automatically included-->
+    <!--CHAINS: When a chain is specified, all the links along the chain (including endpoints) are included in the group. Additionally, all the joints that are parents to included links are also included. This means that joints along the chain and the parent joint of the base link are included in the group-->
+    <!--SUBGROUPS: Groups can also be formed by referencing to already defined group names-->
+    <group name="manipulator">
+        <link name="base_link" />
+        <link name="tool0" />
+    </group>
+    <!--VIRTUAL JOINT: Purpose: this element defines a virtual joint between a robot link and an external frame of reference (considered fixed with respect to the robot)-->
+    <virtual_joint name="virtual_joint" type="fixed" parent_frame="world" child_link="base_link" />
+    <!--DISABLE COLLISIONS: By default it is assumed that any link of the robot could potentially come into collision with any other link in the robot. This tag disables collision checking between a specified pair of links. -->
+    <disable_collisions link1="base_link" link2="link_1" reason="Adjacent" />
+    <disable_collisions link1="link_1" link2="link_2" reason="Adjacent" />
+    <disable_collisions link1="link_2" link2="link_3" reason="Adjacent" />
+    <disable_collisions link1="link_3" link2="link_4" reason="Adjacent" />
+    <disable_collisions link1="link_3" link2="link_5" reason="Never" />
+    <disable_collisions link1="link_3" link2="link_6" reason="Never" />
+    <disable_collisions link1="link_4" link2="link_5" reason="Adjacent" />
+    <disable_collisions link1="link_4" link2="link_6" reason="Never" />
+    <disable_collisions link1="link_5" link2="link_6" reason="Adjacent" />
+</robot>

kuka_cybertech_kr16_r1610_moveit_config/config/ompl_planning.yaml

@@ -0,0 +1,148 @@
+planner_configs:
+  SBL:
+    type: geometric::SBL
+    range: 0.0  # Max motion added to tree. ==> maxDistance_ default: 0.0, if 0.0, set on setup()
+  EST:
+    type: geometric::EST
+    range: 0.0  # Max motion added to tree. ==> maxDistance_ default: 0.0, if 0.0 setup()
+    goal_bias: 0.05  # When close to goal select goal, with this probability. default: 0.05
+  LBKPIECE:
+    type: geometric::LBKPIECE
+    range: 0.0  # Max motion added to tree. ==> maxDistance_ default: 0.0, if 0.0, set on setup()
+    border_fraction: 0.9  # Fraction of time focused on boarder default: 0.9
+    min_valid_path_fraction: 0.5  # Accept partially valid moves above fraction. default: 0.5
+  BKPIECE:
+    type: geometric::BKPIECE
+    range: 0.0  # Max motion added to tree. ==> maxDistance_ default: 0.0, if 0.0, set on setup()
+    border_fraction: 0.9  # Fraction of time focused on boarder default: 0.9
+    failed_expansion_score_factor: 0.5  # When extending motion fails, scale score by factor. default: 0.5
+    min_valid_path_fraction: 0.5  # Accept partially valid moves above fraction. default: 0.5
+  KPIECE:
+    type: geometric::KPIECE
+    range: 0.0  # Max motion added to tree. ==> maxDistance_ default: 0.0, if 0.0, set on setup()
+    goal_bias: 0.05  # When close to goal select goal, with this probability. default: 0.05 
+    border_fraction: 0.9  # Fraction of time focused on boarder default: 0.9 (0.0,1.]
+    failed_expansion_score_factor: 0.5  # When extending motion fails, scale score by factor. default: 0.5
+    min_valid_path_fraction: 0.5  # Accept partially valid moves above fraction. default: 0.5
+  RRT:
+    type: geometric::RRT
+    range: 0.0  # Max motion added to tree. ==> maxDistance_ default: 0.0, if 0.0, set on setup()
+    goal_bias: 0.05  # When close to goal select goal, with this probability? default: 0.05
+  RRTConnect:
+    type: geometric::RRTConnect
+    range: 0.0  # Max motion added to tree. ==> maxDistance_ default: 0.0, if 0.0, set on setup()
+  RRTstar:
+    type: geometric::RRTstar
+    range: 0.0  # Max motion added to tree. ==> maxDistance_ default: 0.0, if 0.0, set on setup()
+    goal_bias: 0.05  # When close to goal select goal, with this probability? default: 0.05
+    delay_collision_checking: 1  # Stop collision checking as soon as C-free parent found. default 1
+  TRRT:
+    type: geometric::TRRT
+    range: 0.0  # Max motion added to tree. ==> maxDistance_ default: 0.0, if 0.0, set on setup()
+    goal_bias: 0.05  # When close to goal select goal, with this probability? default: 0.05
+    max_states_failed: 10  # when to start increasing temp. default: 10
+    temp_change_factor: 2.0  # how much to increase or decrease temp. default: 2.0
+    min_temperature: 10e-10  # lower limit of temp change. default: 10e-10
+    init_temperature: 10e-6  # initial temperature. default: 10e-6
+    frountier_threshold: 0.0  # dist new state to nearest neighbor to disqualify as frontier. default: 0.0 set in setup() 
+    frountierNodeRatio: 0.1  # 1/10, or 1 nonfrontier for every 10 frontier. default: 0.1
+    k_constant: 0.0  # value used to normalize expresssion. default: 0.0 set in setup()
+  PRM:
+    type: geometric::PRM
+    max_nearest_neighbors: 10  # use k nearest neighbors. default: 10
+  PRMstar:
+    type: geometric::PRMstar
+  FMT:
+    type: geometric::FMT
+    num_samples: 1000  # number of states that the planner should sample. default: 1000
+    radius_multiplier: 1.1  # multiplier used for the nearest neighbors search radius. default: 1.1
+    nearest_k: 1  # use Knearest strategy. default: 1
+    cache_cc: 1  # use collision checking cache. default: 1
+    heuristics: 0  # activate cost to go heuristics. default: 0
+    extended_fmt: 1  # activate the extended FMT*: adding new samples if planner does not finish successfully. default: 1
+  BFMT:
+    type: geometric::BFMT
+    num_samples: 1000  # number of states that the planner should sample. default: 1000
+    radius_multiplier: 1.0  # multiplier used for the nearest neighbors search radius. default: 1.0
+    nearest_k: 1  # use the Knearest strategy. default: 1
+    balanced: 0  # exploration strategy: balanced true expands one tree every iteration. False will select the tree with lowest maximum cost to go. default: 1
+    optimality: 1  # termination strategy: optimality true finishes when the best possible path is found. Otherwise, the algorithm will finish when the first feasible path is found. default: 1
+    heuristics: 1  # activates cost to go heuristics. default: 1
+    cache_cc: 1  # use the collision checking cache. default: 1
+    extended_fmt: 1  # Activates the extended FMT*: adding new samples if planner does not finish successfully. default: 1
+  PDST:
+    type: geometric::PDST
+  STRIDE:
+    type: geometric::STRIDE
+    range: 0.0  # Max motion added to tree. ==> maxDistance_ default: 0.0, if 0.0, set on setup()
+    goal_bias: 0.05  # When close to goal select goal, with this probability. default: 0.05 
+    use_projected_distance: 0  # whether nearest neighbors are computed based on distances in a projection of the state rather distances in the state space itself. default: 0
+    degree: 16  # desired degree of a node in the Geometric Near-neightbor Access Tree (GNAT). default: 16 
+    max_degree: 18  # max degree of a node in the GNAT. default: 12
+    min_degree: 12  # min degree of a node in the GNAT. default: 12
+    max_pts_per_leaf: 6  # max points per leaf in the GNAT. default: 6
+    estimated_dimension: 0.0  # estimated dimension of the free space. default: 0.0
+    min_valid_path_fraction: 0.2  # Accept partially valid moves above fraction. default: 0.2
+  BiTRRT:
+    type: geometric::BiTRRT
+    range: 0.0  # Max motion added to tree. ==> maxDistance_ default: 0.0, if 0.0, set on setup()
+    temp_change_factor: 0.1  # how much to increase or decrease temp. default: 0.1
+    init_temperature: 100  # initial temperature. default: 100
+    frountier_threshold: 0.0  # dist new state to nearest neighbor to disqualify as frontier. default: 0.0 set in setup() 
+    frountier_node_ratio: 0.1  # 1/10, or 1 nonfrontier for every 10 frontier. default: 0.1
+    cost_threshold: 1e300  # the cost threshold. Any motion cost that is not better will not be expanded. default: inf
+  LBTRRT:
+    type: geometric::LBTRRT
+    range: 0.0  # Max motion added to tree. ==> maxDistance_ default: 0.0, if 0.0, set on setup()
+    goal_bias: 0.05  # When close to goal select goal, with this probability. default: 0.05 
+    epsilon: 0.4  # optimality approximation factor. default: 0.4
+  BiEST:
+    type: geometric::BiEST
+    range: 0.0  # Max motion added to tree. ==> maxDistance_ default: 0.0, if 0.0, set on setup()
+  ProjEST:
+    type: geometric::ProjEST
+    range: 0.0  # Max motion added to tree. ==> maxDistance_ default: 0.0, if 0.0, set on setup()
+    goal_bias: 0.05  # When close to goal select goal, with this probability. default: 0.05 
+  LazyPRM:
+    type: geometric::LazyPRM
+    range: 0.0  # Max motion added to tree. ==> maxDistance_ default: 0.0, if 0.0, set on setup()
+  LazyPRMstar:
+    type: geometric::LazyPRMstar
+  SPARS:
+    type: geometric::SPARS
+    stretch_factor: 3.0  # roadmap spanner stretch factor. multiplicative upper bound on path quality. It does not make sense to make this parameter more than 3. default: 3.0
+    sparse_delta_fraction: 0.25  # delta fraction for connection distance. This value represents the visibility range of sparse samples. default: 0.25
+    dense_delta_fraction: 0.001  # delta fraction for interface detection. default: 0.001
+    max_failures: 1000  # maximum consecutive failure limit. default: 1000
+  SPARStwo:
+    type: geometric::SPARStwo
+    stretch_factor: 3.0  # roadmap spanner stretch factor. multiplicative upper bound on path quality. It does not make sense to make this parameter more than 3. default: 3.0
+    sparse_delta_fraction: 0.25  # delta fraction for connection distance. This value represents the visibility range of sparse samples. default: 0.25
+    dense_delta_fraction: 0.001  # delta fraction for interface detection. default: 0.001
+    max_failures: 5000  # maximum consecutive failure limit. default: 5000
+manipulator:
+  default_planner_config: RRTConnectkConfigDefault
+  planner_configs:
+    - SBLkConfigDefault
+    - ESTkConfigDefault
+    - LBKPIECEkConfigDefault
+    - BKPIECEkConfigDefault
+    - KPIECEkConfigDefault
+    - RRTkConfigDefault
+    - RRTConnectkConfigDefault
+    - RRTstarkConfigDefault
+    - TRRTkConfigDefault
+    - PRMkConfigDefault
+    - PRMstarkConfigDefault
+    - FMTkConfigDefault
+    - BFMTkConfigDefault
+    - PDSTkConfigDefault
+    - STRIDEkConfigDefault
+    - BiTRRTkConfigDefault
+    - LBTRRTkConfigDefault
+    - BiESTkConfigDefault
+    - ProjESTkConfigDefault
+    - LazyPRMkConfigDefault
+    - LazyPRMstarkConfigDefault
+    - SPARSkConfigDefault
+    - SPARStwokConfigDefault

kuka_cybertech_kr16_r1610_moveit_config/config/ros_controllers.yaml

@@ -0,0 +1,26 @@
+kuka_kr16_r1610:
+# MoveIt-specific simulation settings
+  moveit_sim_hw_interface:
+    joint_model_group: controllers_initial_group_
+    joint_model_group_pose: controllers_initial_pose_
+# Settings for ros_control control loop
+  generic_hw_control_loop:
+    loop_hz: 300
+    cycle_time_error_threshold: 0.01
+# Settings for ros_control hardware interface
+  hardware_interface:
+    joints:
+      - joint_a1
+      - joint_a2
+      - joint_a3
+      - joint_a4
+      - joint_a5
+      - joint_a6
+    sim_control_mode: 1  # 0: position, 1: velocity
+# Publish all joint states
+# Creates the /joint_states topic necessary in ROS
+  joint_state_controller:
+    type: joint_state_controller/JointStateController
+    publish_rate: 50
+  controller_list:
+    []

kuka_cybertech_kr16_r1610_moveit_config/launch/default_warehouse_db.launch

@@ -0,0 +1,15 @@
+<launch>
+
+  <arg name="reset" default="false"/>
+  <!-- If not specified, we'll use a default database location -->
+  <arg name="moveit_warehouse_database_path" default="$(find kuka_cybertech_kr16_r1610_moveit_config)/default_warehouse_mongo_db" />
+
+  <!-- Launch the warehouse with the configured database location -->
+  <include file="$(find kuka_cybertech_kr16_r1610_moveit_config)/launch/warehouse.launch">
+    <arg name="moveit_warehouse_database_path" value="$(arg moveit_warehouse_database_path)" />
+  </include>
+
+  <!-- If we want to reset the database, run this node -->
+  <node if="$(arg reset)" name="$(anon moveit_default_db_reset)" type="moveit_init_demo_warehouse" pkg="moveit_ros_warehouse" respawn="false" output="screen" />
+
+</launch>

kuka_cybertech_kr16_r1610_moveit_config/launch/demo.launch

@@ -0,0 +1,57 @@
+<launch>
+
+  <!-- By default, we do not start a database (it can be large) -->
+  <arg name="db" default="false" />
+  <!-- Allow user to specify database location -->
+  <arg name="db_path" default="$(find kuka_cybertech_kr16_r1610_moveit_config)/default_warehouse_mongo_db" />
+
+  <!-- By default, we are not in debug mode -->
+  <arg name="debug" default="false" />
+
+  <!--
+  By default, hide joint_state_publisher's GUI
+
+  MoveIt!'s "demo" mode replaces the real robot driver with the joint_state_publisher.
+  The latter one maintains and publishes the current joint configuration of the simulated robot.
+  It also provides a GUI to move the simulated robot around "manually".
+  This corresponds to moving around the real robot without the use of MoveIt.
+  -->
+  <arg name="use_gui" default="false" />
+
+  <!-- Load the URDF, SRDF and other .yaml configuration files on the param server -->
+  <include file="$(find kuka_cybertech_kr16_r1610_moveit_config)/launch/planning_context.launch">
+    <arg name="load_robot_description" value="true"/>
+  </include>
+
+  <!-- If needed, broadcast static tf for robot root -->
+
+
+  <!-- We do not have a robot connected, so publish fake joint states -->
+  <node name="joint_state_publisher" pkg="joint_state_publisher" type="joint_state_publisher">
+    <param name="use_gui" value="$(arg use_gui)"/>
+    <rosparam param="source_list">[move_group/fake_controller_joint_states]</rosparam>
+  </node>
+
+  <!-- Given the published joint states, publish tf for the robot links -->
+  <node name="robot_state_publisher" pkg="robot_state_publisher" type="robot_state_publisher" respawn="true" output="screen" />
+
+  <!-- Run the main MoveIt executable without trajectory execution (we do not have controllers configured by default) -->
+  <include file="$(find kuka_cybertech_kr16_r1610_moveit_config)/launch/move_group.launch">
+    <arg name="allow_trajectory_execution" value="true"/>
+    <arg name="fake_execution" value="true"/>
+    <arg name="info" value="true"/>
+    <arg name="debug" value="$(arg debug)"/>
+  </include>
+
+  <!-- Run Rviz and load the default config to see the state of the move_group node -->
+  <include file="$(find kuka_cybertech_kr16_r1610_moveit_config)/launch/moveit_rviz.launch">
+    <arg name="config" value="true"/>
+    <arg name="debug" value="$(arg debug)"/>
+  </include>
+
+  <!-- If database loading was enabled, start mongodb as well -->
+  <include file="$(find kuka_cybertech_kr16_r1610_moveit_config)/launch/default_warehouse_db.launch" if="$(arg db)">
+    <arg name="moveit_warehouse_database_path" value="$(arg db_path)"/>
+  </include>
+
+</launch>

kuka_cybertech_kr16_r1610_moveit_config/launch/fake_moveit_controller_manager.launch.xml

@@ -0,0 +1,9 @@
+<launch>
+
+  <!-- Set the param that trajectory_execution_manager needs to find the controller plugin -->
+  <param name="moveit_controller_manager" value="moveit_fake_controller_manager/MoveItFakeControllerManager"/>
+
+  <!-- The rest of the params are specific to this plugin -->
+  <rosparam file="$(find kuka_cybertech_kr16_r1610_moveit_config)/config/fake_controllers.yaml"/>
+
+</launch>

kuka_cybertech_kr16_r1610_moveit_config/launch/joystick_control.launch

@@ -0,0 +1,17 @@
+<launch>
+  <!-- See moveit_ros/visualization/doc/joystick.rst for documentation -->
+
+  <arg name="dev" default="/dev/input/js0" />
+
+  <!-- Launch joy node -->
+  <node pkg="joy" type="joy_node" name="joy">
+    <param name="dev" value="$(arg dev)" /> <!-- Customize this to match the location your joystick is plugged in on-->
+    <param name="deadzone" value="0.2" />
+    <param name="autorepeat_rate" value="40" />
+    <param name="coalesce_interval" value="0.025" />
+  </node>
+
+  <!-- Launch python interface -->
+  <node pkg="moveit_ros_visualization" type="moveit_joy.py" output="screen" name="moveit_joy"/>
+
+</launch>

kuka_cybertech_kr16_r1610_moveit_config/launch/kuka_kr16_r1610_moveit_controller_manager.launch.xml

@@ -0,0 +1,3 @@
+<launch>
+
+</launch>

kuka_cybertech_kr16_r1610_moveit_config/launch/kuka_kr16_r1610_moveit_sensor_manager.launch.xml

@@ -0,0 +1,3 @@
+<launch>
+
+</launch>