Update testing start script

start_docker_testing.sh

@@ -15,18 +15,21 @@ MYCALL=CHANGEME
 # The normal receive frequency used by Project Horus is 443.5 MHz
 RXFREQ=443500000
 
+# SDR Type. Set this to RTLSDR for RTL-SDR use or KA9Q for KA9Q-Radio use
+SDR_TYPE=RTLSDR
+
 # RTLSDR Device ID. Leave this at 0 if you don't want to use a particular device
 DEVICE=0
 
-# Receiver Gain. Set this to 0 to use automatic gain control, otherwise if running a
+# Receiver Gain (RTL-SDR only). Set this to 0 to use automatic gain control, otherwise if running a
 # preamplifier, you may want to experiment with lower gain settings to optimize
 # your receiver setup.
 # You can find what gain range is valid for your RTLSDR by running: rtl_test
 # A very rough figure that may work if you are running a preamp with ~20 dB gain is
 # 32.8 - your performance may vary!
 GAIN=0
 
-# Bias Tee Enable (1) or Disable (0)
+# Bias Tee Enable (1) or Disable (0) (RTL-SDR only)
 # Enable this is you are intending on powering a preamplifer via coax from your RTLSDR
 BIAS=0
 
@@ -48,26 +51,64 @@ OVERSAMPLING=8
 # with Chasemapper
 UDP_PORT=0
 
+# UDP Port used for Wenet inter-process communication.
+# If you are intenting on running more than one Wenet instance on the same computer
+# (e.g. multiple docker containers), use a different port for each instance.
+IMAGE_PORT=7890
+
+# HTTP server port for Web GUI.
+# If you are intenting on running more than one Wenet instance on the same computer
+# (e.g. multiple docker containers), use a different port for each instance.
+WEB_PORT=5003
 
 # Stop and remove any existing wenet instances
 echo "Stopping/Removing any existing Wenet instances..."
 docker stop wenet || true && docker rm wenet || true
 
 # Start the container!
 echo "Starting new Wenet instance..."
-docker run -d \
-	--name wenet \
-	-e MYCALL=$MYCALL \
-	-e RXFREQ=$RXFREQ \
-	-e GAIN=$GAIN \
-	-e BIAS=$BIAS \
-	-e BAUD_RATE=$BAUD_RATE \
-	-e OVERSAMPLING=$OVERSAMPLING \
-	-e DEVICE=$DEVICE \
-	-e UDP_PORT=$UDP_PORT \
-	-v ~/wenet/rx_images/:/opt/wenet/rx_images/ \
-	--device /dev/bus/usb \
-	-p 5003:5003 \
-	ghcr.io/projecthorus/wenet:testing
+if [ "SDR_TYPE" = "RTLSDR" ] ; then
+	docker run -d \
+		--name wenet \
+		-e MYCALL=$MYCALL \
+		-e RXFREQ=$RXFREQ \
+		-e GAIN=$GAIN \
+		-e BIAS=$BIAS \
+		-e BAUD_RATE=$BAUD_RATE \
+		-e OVERSAMPLING=$OVERSAMPLING \
+		-e DEVICE=$DEVICE \
+		-e UDP_PORT=$UDP_PORT \
+		-e IMAGE_PORT=$IMAGE_PORT \
+		-e WEB_PORT=$WEB_PORT \
+		-e SDR_TYPE=$SDR_TYPE \
+		-v ~/wenet/rx_images/:/opt/wenet/rx_images/ \
+		--device /dev/bus/usb \
+		-p $WEB_PORT:$WEB_PORT
+		ghcr.io/projecthorus/wenet:latest
+elif [ "$SDR_TYPE" = "KA9Q" ] ; then
+	docker run -d \
+		--name wenet \
+		-e MYCALL=$MYCALL \
+		-e RXFREQ=$RXFREQ \
+		-e GAIN=$GAIN \
+		-e BIAS=$BIAS \
+		-e BAUD_RATE=$BAUD_RATE \
+		-e OVERSAMPLING=$OVERSAMPLING \
+		-e DEVICE=$DEVICE \
+		-e UDP_PORT=$UDP_PORT \
+		-e IMAGE_PORT=$IMAGE_PORT \
+		-e WEB_PORT=$WEB_PORT \
+		-e SDR_TYPE=$SDR_TYPE \
+		-v ~/wenet/rx_images/:/opt/wenet/rx_images/ \
+		-v /var/run/dbus:/var/run/dbus \
+		-v /var/run/avahi-daemon/socket:/var/run/avahi-daemon/socket \
+		--device /dev/bus/usb \
+		--network host \
+		ghcr.io/projecthorus/wenet:latest
+
+else
+	echo "No valid SDR type specified! Please enter RTLSDR or KA9Q!"
+	exit 0
+fi
 
 echo "Navigate to http://localhost:5003/ in your web browser to see the Wenet interface!"