As the name may partially imply, slidegen.py generates song slides as images - out of a plain text input file - intended for use with OBS to livestream a typical (contemporary) Sunday church service.
This program is also intended to be used in conjunction with ssync.py, which is basically a wrapper script that automatically syncs a local copy with the remote slide repository, removes the old obs slides and lets the user interactively choose the new slides with a smart fuzzy finder. It stands for slidesync, by the way.
Standalone use of slidegen.py is possible and can sure fit other use cases.
To add song slides to OBS or similar software as input sources, there exist the following obvious options:
- generating song slides via a text or presentation documents, exported in printable form and converted to images afterwards
- generating images through image manipulation or designing software and export to images
Both of these processes have major downsides: They are hard to automate, take a long time to create the slides, have very limited to support for bulk operations on the song repository (like wanting to change the theme and layout of all slides or changing the metadata shared by a lot of songs) and maintaining is a lot harder because of bad portability and complex source files.
The only upside they have is that can be more intuitive for inexperienced computer users, but changing a text file template and uploading to a remote storage should not be too hard to manage and worth it as it has none of the above mentioned downsides.
As mentioned above, this program is not made to be executed directly. Therefore the commandline interface is not yet fully stable. Generally, the syntax is as follows
./slidegen.py SRC_PATH DEST_DIR PROMPT_INPUT
with SRC_PATH being the path to the song plain text file, DEST_DIR the output directory where the slide image file output is placed and PROMPT_INPUT
Here a short example:
./slidegen.py "../songrepo/Stille Nacht.txt" "~/Documents/Song Slides 1"
The wrapper script does have two optional arguments, which are usually not needed. One is disables the syncing with the remote and to other disables the asynchronous slide generation, ut check out the help page as shown down below. To execute normally, use
./ssync.py
and to show the help page for both programs use -h or --help interchangeably like this:
./ssync.py -h
./slidegen.py --help
The file is divided into two what we will here call parts that are divided with at least one \n character and an arbitrary amount of lines that are either empty or only contain whitespace:
- the metadata header (top of the file)
- the text body (bottom of the file)
As the top of the file are these five metadata entries. We call them metadata strings:
- title
- book
- text
- melody
- structure
As for the syntax, each line starts with the metadata string, followed by the string literal : , and ends with a non-empty string that acts as the value of the metadata string, which we call metadata value. The structure is allowed only R and non-negative integers values separated by one comma each, which represents the structure or order in which to song is to be played by dividing the song into refrain and verses. The values in between the commas are called structure elements.
Hence to check if a line in the header has the correct syntax use the following regular expression: ^(?!structure)\S+: .+|^structure: ([0-9]+|R)(,([0-9]+|R))*$. What is not captured syntactically by this regex is that each metadata string and value pair must appear exactly once in the header.
The semantics of the other metadata values can be pretty much whatever you want, as long as they adhere to the syntax. For practical reasons it is still recommended to adopt guidelines e.g. the use of consistent naming of song books and page numbering in a given song repository. Note also that the arrangement of lines doesn't have to match the list above, e.g. the line with the book metadata string can be above the line containing the title metadata, but note that it is probably better to not mix this up anyway for quicker manual editing's sake.
Example of a metadata header:
title: Amazing Grace
book: Pretty much every protestant songbook
text: John Newton (1779)
melody: American folk tune
structure: 1,2,3
To start off with the syntax, every unique structure element, will be placed on a separate line between an opening square bracket directly to the left and an closing square bracket directly to the right, e.g. [R] or [3]. We call these lines structure element identifiers. After each of those lines must follow a finite amount of non-empty lines that a) semantically capture the song text of the corresponding refrain or verse indicated by the structure element and b) syntactically contain at most the amount of characters specified in the config as METADATA_VALUE_CHAR_LIMIT which by default is set to 100. The lines which are empty or only contain whitespace after the last line that doesn't meet these two requirements before either the next structure element identifier or the end of the file are ignored, while the lines that are empty or only contain whitespace before that last line who doesn't meet these two requirements are not ignored, as they semantically could act as separators intended by the user. Note that such ignored lines are not syntactically necessary, but are heavily encouraged for their clearer separation they provide semantically.
Here is a example of a text body using the first three verses of 'Amazing Grace' written by John Newton found on Hymnary.org:
[1]
Amazing grace (how sweet the sound)
that saved a wretch like me!
I once was lost, but now am found,
was blind, but now I see.
[2]
'Twas grace that taught my heart to fear,
and grace my fears relieved;
how precious did that grace appear
the hour I first believed!
[3]
Through many dangers, toils and snares
I have already come:
'tis grace has brought me safe thus far,
and grace will lead me home.
The configuration of both slidegen.py and ssync.py is handled via constants in *.py files. The default configuration is stored in config/default_config.py, and in the same form a custom user-defined configuration can optionally - except for ssync.py which needs user-defined variables - be placed in config/config.py. You don't have to specify all the constants present in the default config, only the one's you want to change.
For example, if you want to change the text color to green and the file extension to "jpeg", your config/config.py could look like this:
TEXT_COLOR = "green"
FILE_EXTENSION = "jpeg"Note that directories constants support environment variables in the form $var and ${var} and the ~ user expansion. Also you can always use relative paths, so you don't really need to always enter the full absolute path. For example you could do something like this:
OBS_SLIDES_DIR = "~/Documents/obs-${OBS_MAJOR_VERSION}/slides$month$weekday"Also note that if you enter unsensible configuration entries, that the program may crash as there is basically no config validation except for something like directories.
Now for explanation of the individual entries.
IMAGE_FORMAT forces a specific file format when writing the files in formats accepted by ImageMagick. The individual slides get named in this form: ${FILE_NAMEING}${SLIDE_NUMBER}${FILE_EXTENSION}. Hence with the default config of
IMAGE_FORMAT = "jpeg"
FILE_EXTENSION = "jpg"
FILE_NAMEING = "slide-"the slides would be named slide-1.jpg, slide-2.jpg, slide-3.jpg etc.
WIDTH and HEIGHT present the output resolution of the slide in pixels. Meaning for 4K slides you would have to use
WIDTH = 3840
HEIGHT = 2160Now let us look at the start slide. With BG_COLOR we can set the background for all slides and FG_COLOR sets the color of the what we call titlebar. Note the color values are again in the typical form accepted by ImageMagick.
BG_COLOR = "white"
FG_COLOR = "#6298a4"
TITLE_COLOR = "#d8d5c4"
MAX_TITLE_FONT_SIZE = 70
MIN_TITLE_FONT_SIZE = 20
TITLE_FONT_SIZE_STEP = 10
TITLE_HEIGHT = 160
TITLEBAR_Y = 65
TITLEBAR_TRIANGLE_WIDTH = 80
TITLEBAR_TRIANGLE_HEIGTH = 160Both TITLEBAR_Y and TITLE_HEIGHT are transformations given in pixels as shown in the following image. THE TITLE_COLOR gives a color of the song title (in this example, "Amazing Grace") in the accepted color format of ImageMagick, same for the font sizes. More in detail, the MAX_TITLE_FONT_SIZE is applied when the song title is not too long, but when is the case, slidegen automatically shrinks down the font size in steps of TITLE_FONT_SIZE_STEP until it reaches the minimum font size specified by MIN_TITLE_FONT_SIZE. The dimensions of the triangle on the right of the titlebar can be give in pixel as the height by TITLEBAR_TRIANGLE_HEIGTH and as the width by TITLEBAR_TRIANGLE_WIDTH.
INFODISPLAY_FONT_SIZE = 25
INFODISPLAY_ITEM_WIDTH = 20
INFODISPLAY_X = 1650
INFODISPLAY_Y = 1000INFODISPLAY_X and INFODISPLAY_Y are the coordinates given as pixels which define where the top-left pixel of the infodisplay is located on the song slides. INFODISPLAY_FONT_SIZE just gives the font size in a format acceptable by ImageMagick. Closely related, INFODISPLAY_ITEM_WIDTH gives the width in pixels of both the letter of a structure element in the infodisplay and the whitespace that follows before the next structure to the right.
PLAYER_WIDTH = 560
PLAYER_HEIGHT = 315The player is intended to be another OBS video source that displays someone or multiple people playing their instruments while the song is playing. The player is anchored on the top right of the slides. In pixels, you can change the dimensions of the player by width via PLAYER_WIDTH and by height via PLAYER_HEIGHT.
This is so that when the text width on maximum font size collides with the player, the font size is gradually decreased - once again only down to the defined minimum font size - until there is no overlap anymore. Hence if you don't intend to use a player just set the dimensions to 0.
Slidegen uses two font styles, normal and bold. BOLD_FONT_PATH should point the respecting ttf/otf file for the bold style font and FONT_PATH for the normal style font. FONT and BOLD_FONT should be defined as the name of the font as accepted by ImageMagick. This is as some submodules for ImageMagick - or at least their wand python bindings - cannot reliably convert between name and path of the font and has sometimes problems accessing the system font config. Hence we use these four variables. The default config
BOLD_FONT_PATH = "/usr/share/fonts/TTF/century-gothic/CenturyGothicBold.ttf"
FONT_PATH = "/usr/share/fonts/TTF/century-gothic/CenturyGothic.ttf"
FONT = "Century-Gothic"
BOLD_FONT = "Century-Gothic-Bold"is made to use the ttf-century-gothic font on the AUR on Arch Linux (-based distros). For different operating systems you may need to use another naming convention for FONT and FONT_BOLD like using spaces instead of dashes, but check out the ImageMagick documentation for more details.
METADATA_FONT_SIZE = 36
METADATA_X = 70
METADATA_VALUE_CHAR_LIMIT = 100
BOOK_Y = 260
ATTRIBUTIONS_Y = 930You can change the font size off the three metadata lines with an acceptable format by ImageMagick using METADATA_FONT_SIZE. The metadata is separated into two block on the start slide: The top part contains the book info and the bottom part contains the attributions. You can set the top part placement in pixels with BOOK_Y and the respecting bottom part with ATTRIBUTIONS_Y. You can also set the maximum character limit of these metadata lines with METADATA_VALUE_CHAR_LIMIT.
STRUCTURE_ELEMENT_X = 80
STRUCTURE_ELEMENT_Y = 400On the top left of the Text Canvas, there is a indicator for the structure element of the current slide. The structure element is followed by a dot. Note that the chorus or R is not displayed. You can control the placement in pixels with its X coordinate with STRUCTURE_ELEMENT_X and its Y coordinate with STRUCTURE_ELEMENT_Y.
TEXT_CANVAS_X = 160
TEXT_CANVAS_Y = 400
TEXT_CANVAS_WIDTH = 1600
TEXT_CANVAS_HEIGHT = 600The Text canvas placement is defined in pixels with its coordinates via TEXT_CANVAS_X and TEXT_CANVAS_Y. Also in pixels are the dimensions in width with TEXT_CANVAS_WIDTH and height with TEXT_CANVAS_HEIGHT.
STRUCTURE_ELEMENT_PER_LINE_CHAR_LIMIT = 85
STRUCTURE_ELEMENT_MAX_LINES = 8
MAX_CANVAS_FONT_SIZE = 55
MIN_CANVAS_FONT_SIZE = 35
CANVAS_FONT_SIZE_STEP = 5
INTERLINE_SPACING = 30The character limit of each line is defined with STRUCTURE_ELEMENT_PER_LINE_CHAR_LIMIT. The maximum number of lines is set by STRUCTURE_ELEMENT_MAX_LINES. Now all the following variables in this paragraph are defined in a format accepted by ImageMagick. MAX_CANVAS_FONT_SIZE sets the maximum font size in the text canvas, that gets reduced by a delta of CANVAS_FONT_SIZE_STEP until the minimum of MIN_CANVAS_FONT_SIZE is reached. The interline spacing is indicated by INTERLINE_SPACING.
ARROW_HEIGHT = 50
ARROW_COLOR = "black"
ARROW_X = 1725
ARROW_Y = 900Here we are talking about the arrow that appears when the text is too long for a single slide, so the text gets split into mutliple slides. And so that this is obvious to the viewer of the slide an arrow is placed - by default in the bottom right of the song slide - to show that this is in fact part of a multi page slide, but not the last page. That is only on the last page of a multi page slide the arrow disappears.
The color of the arrow is to be defined in a format accepted by ImageMagick in ARROW_COLOR. The rest of the variables in this paragraph will be in pixels. The dimensions of the pixels are calculated by a given height from ARROW_HEIGHT, as not to distort the shape of the arrow. The placement coordinates are defined by ARROW_X and ARROW_Y.
METADATA_STRINGS = ("title", "book", "text", "melody", "structure")They are defined in a tuple of five string, and are not really meant to be changed by the user. Only change if you are an advanced user who read and understand the source code.
RCLONE_REMOTE_DIR = 'mydr:"02 Liedtexte"'
RCLONE_LOCAL_DIR = "/home/billy/Documents/songrepo"Here an example of how to setup the rclone variables. RCLONE_REMOTE_DIR sets the rclone remote directory in the typical rclone format and RCLONE_LOCAL_DIR is the local directory on your machine that rclone syncs to. For more information, please check the rclone documentation.
FZF_ARGS = "-i"Pass commandline arguments to the fuzzy finder fzf. The example invokes the option for matching case-insensitive. By default, no arguments are passed to fzf.
SSYNC_CACHE_DIR = "$XDG_CACHE_HOME/ssync"
SSYNC_CHECKFILE_NAMING = "slidegen-checkfile.txt"
SSYNC_CACHEFILE_NAMING = "slidegen-cachefile.txt"
SSYNC_CHOSEN_FILE_NAMING = ".chosen-file.txt"SSYNC_CACHE_DIR sets the directory in which the checkfile and cachefile of ssync.py get placed. You can change their name by setting SSYNC_CACHEFILE_NAMING for the cachefile and SSYNC_CHECKFILE_NAMING for the checkfile. Same for the cache file that stores the chosen prompt fzf answer in SSYNC_CHOSEN_FILE_NAMING.
OBS_MIN_SUBDIRS = 7
OBS_SLIDES_DIR = "~/Documents/obs/slides"
OBS_SUBDIR_NAMING = "Song "The slides are placed in subdirectories of OBS_SLIDES_DIR with the following naming: ${OBS_SUBDIR_NAMING}${NUM} with NUM being the number - also an integer - of the song selected by ssync, starting by 1. So that OBS doesn't complain about missing directories, empty directories are created following the naming for subdirectories up until the number defined by OBS_MIN_SUBDIRS.
First, install a reasonably new version of
-
imagemagick (If you are a windows user, select the c/c++ developer headers. Also you may need vcredist for imagemagick to work.)
-
some python packages that are not in the standard library based on wether you use a unix-like system or Windows. Note that you only need to execute the one for you platform:
pip install -r requirements-unix.txt pip install -r requirements-win32.txt
Then clone the git repository somewhere, doesn't really matter. I often use
cd ~/.local/src
git clone https://github.com/noahvogt/slidegen.git
From there, connect to your remote using rclone (better check the rclone documentation directly) and edit your config/config.py in ~/.local/src/slidegen as described above in the usage section. As a last step, you can setup symlinks of your needed executables to your $PATH, set desktop shortcuts or add them to your taskbar.
next_song.py checks which song was played last in a cachefile stored at NEXTSONG_CACHE_FILE of the form
YYYY-MM-DD
[0-9]+
which for example can look like this:
2023-11-05
3
It then increments the value up to OBS_MIN_SUBDIRS and cycles back to 1. After each increment, it writes to the cachefile and switches to the respecting OBS Scene. With the configuration
OBS_SONG_SCENE_PREFIX = "Song "it would switch to the OBS Scene "Song 1" for the first song, "Song 2" for the second etc.
To connect to OBS, it uses a OBS Websocket Connection. Here an example configuration with an empty password:
OBS_WEBSOCKET_HOSTNAME = "localhost"
OBS_WEBSOCKET_PORT = 4444
OBS_WEBSOCKET_PASSWORD = ""Same as next_song.py, but in the other direction. Meaning it will switch to the OBS scene for the previous song.
Instead of cycling like next_song.py, force_song.py takes an integer as single argument, sends the corresponding hotkey and saves the value to the same cachefile. For example, use
./force_song.py 4
to switch to the scene with song 4.
These are some issues and possible changes that will be addressed or at least considered by our future development efforts:
- add more documentation, especially explaining the slide generation, but also the
PROMPT_INPUTand the cd burning + sermon uploading scripts - add tests
- use smarter multi slide splitter algorithm: either by pattern recognition like line matching or rhymes of the last word or by incorporating some sort of sub-song-structures in the body.
- add warnings that indicate potential problems with rclone syncing
- add (semantic) versioning, maybe even display on program run as text
- add not-yet-public streaming workflow scripts
- for sermon segment generating: Check if file duration and type roughly match the target to avoid useless regenerating. Also, parallelization.
- make multiplatform ejecting of cd drives possible / fix win32 popup after ejecting
- fix cd recording edge cases when:
- a new day starts during the recording
- changing timezone
- changing time
slidegen is free (as in “free speech” and also as in “free beer”) Software. It is distributed under the GNU General Public License v3 (or any later version) - see the accompanying LICENSE file for more details.