exampleRPackage

exampleRPackage shows how R packages can be used to store and communicate scientific research products and metadata. Browse its source code, or read this document for a tutorial on creating R packages.

Introduction

Research projects produce experiments, data, analyses, manuscripts, posters, slides, stimuli and materials, computational models, and more. However, the potential added value of these products is not fully realized due to limited sharing and curating practices. Although more transparent communication of these research products has recently been encouraged (Houtkoop et al. 2018; Lindsay 2017; Vanpaemel et al. 2015; Wicherts et al. 2006; Klein et al. 2018; Martone, Garcia-Castro, and VandenBos 2018; Rouder, Haaf, and Snyder 2019; Rouder 2016), these efforts often focus narrowly on sharing data (and sometimes analysis code). Further, the practical value of sharing is often limited by poor documentation, incompatible file formats, and lack of organization, resulting in low rates of reproducibility (Hardwicke et al. 2018). Standardization of protocols for sharing would be beneficial; but, such standards have not yet emerged. Instead of developing another standard, we suggest borrowing existing standards and practices from software engineering. Specifically, the R package standard, with additional R authoring tools, provides a robust framework for organizing and sharing reproducible research products.

Some advances in data-sharing standards have emerged: In much of psychological science it is now customary to share data on Open Science Framework (OSF). However, those materials often contain idiosyncratic file organization and minimal or missing documentation for raw data. In specific areas, organization and documentation standards have emerged, (e.g., the BIDS framework in neuroscience, Gorgolewski et al. 2016), but they usually only consider data and code instead of the project as a whole. More comprehensive proposals are described in the Transparency and Openness Promotion (Nosek et al. 2015), and Peer Reviewers’ Openness initiative guidelines (Morey et al. 2016), but these fall short of describing detailed standards for organization and metadata.

We sought for a standard for organizing and sharing that would adhere to the FAIR (Findable, Accessible, Interoperable, Reusable) guidelines to maximize the reuse potential of data and support “discovery through good data management” (Wilkinson et al. 2016). Additionally, we recognized the added value of including other research outputs (“products”; e.g., manuscripts) beyond datasets in a reproducible collection of materials that is openly available on the internet for transparency and ease of access. We identified the R package standard with modern online-based workflows as a solution that doesn’t present overwhelming overhead for already busy researchers. Here, we present a tutorial on creating R packages for sharing research products, such as data, functions, and analysis code embedded in narrative documents.

R Package tutorial

The outline of this tutorial is as follows:

Create a new R package with R Studio
- Set up the fundamental package infrastructure
Describe the package
- Edit DESCRIPTION and readme files
Add data to package
- Add raw data, preprocessing scripts, and an R data object
Create and add functions
- Create and document functions
- Dependencies
Document the package
- Describe the package, its functions, and data, in a machine- and human-readable format

After these steps, you will have a functional R package on your computer. Then, we will talk about sharing and showcasing your package online.

Sharing the package
- Upload to GitHub to make your package (and its source code) available
- Connect to Open Science Framework
Create a website for the package
- Showcase your R package online with a website
Add narrative documents
- Describe how to use your data and functions (e.g. manuscripts, supplementary analysis files)

Create a package with R Studio

First, use R Studio to create a new R Project. Click “File” -> “New Project…” -> “New Directory” -> “R Package”. This brings up a menu where you give your package a name, and specify where to create it on your hard drive. To enable Git (Vuorre and Curley 2018), make sure that the “Create a git repository” box is checked (see below). In this tutorial, we create an R package called exampleRPackage; if you want to follow the tutorial exactly, choose that name for your package.

After you click “Create project”, the project’s files and folders look like this:

.
├── .gitignore
├── .Rbuildignore
├── DESCRIPTION
├── NAMESPACE
├── R
│   └── hello.R
├── exampleRPackage.Rproj
└── man
    └── hello.Rd

.gitignore and .Rbuildignore are hidden files, and specify which files should be ignored by Git (Vuorre and Curley 2018), and R package building operations, respectively. You can ignore them for now. DESCRIPTION is a file describing the package, and NAMESPACE its functions. R/ is the folder for scripts that contain R functions. exampleRPackage.Rproj identifies the folder as an R package project. man/ is the “manuals” folder which will have files documenting the package’s functions.

The package is already functional, but it contains nothing useful: Next, we introduce and edit the content to create a complete package that contains data and functions.

Describe the package

The DESCRIPTION file describes the package in a standard, machine-readable format. This file is automatically created with example content by R Studio. However, you need to edit the file to reflect the details of your package, making sure you don’t change the formatting: This file is read by the R package creating process, and the file must therefore remain machine-readable. Here’s an example:

Package: exampleRPackage
Type: Package
Title: An example R package
Version: 0.1.0
Authors@R: person("Matti", "Vuorre", email = "[email protected]",
                  role = c("aut", "cre"))
Description: This package is an example R package.
Encoding: UTF-8
LazyData: true
Depends: 
    R (>= 3.1)
Imports:
    stringr

This file serves two important purposes. First, it describes your package (Title, Version number, Authors, and Description). The Authors@R field contains person information in R syntax (see ?person), and can include multiple persons by wrapping them in c(). (Encoding and Lazydata field can be ignored, for our purposes.) Second, it specifies your package’s dependencies (Depends, Imports, and Suggests [the latter is not included in this example]).

There are important differences between the three fields for specifying your package’s dependencies. First, you should rarely, if ever, use Depends, except for specifying a version of R that your package requires. Imports is the most common field for listing the R packages that your package requires: Packages listed in Imports are installed when your package is installed. When you write functions (see below) in your package, you can use the other package’s functions with the :: operator (e.g. stringr::to_title_case()).

For more information about DESCRIPTION, and describing your package, see http://r-pkgs.had.co.nz/description.html.

Readme

Although not part of the R package standard, we recommend creating a readme file that gives additional narrative description about your package. We recommend writing the file in Markdown or R Markdown (Allaire et al. 2016). To create the R Markdown file, use the following function from the usethis package:

library(usethis)
use_readme_rmd()

This function created the file, and also printed a message indicating that the file has been added to the “.Rbuildignore” file. Make changes to README.Rmd with R Studio’s text editor. When you are done, click Knit in R Studio, which produces a Markdown file that displays nicely when the package is hosted online (see below). (If your README.Rmd uses your package, you cannot Knit it before clicking “Install and Restart” in R Studio’s build tab.)

Now that we have described the package, let’s add some data to it.

Add data

The purposes of saving data in an R package are that the resulting data will be easily available, and described and organized in a standard, machine-readable format. Further, if your package’s source code is under version control (Vuorre and Curley 2018), the data will be versioned as well.

Broadly, there are 3 steps to including data in an R package: 1. Placing raw data in the “data-raw” directory, 2. creating an R script that processes the raw data and creates an R data object into the “data” directory, and 3. documenting the final data object.

First, we will add the raw data to a data-raw/ directory. We use a convenience function from the usethis package to create that folder, which will also add the folder into the .Rbuildignore file, ensuring that the R package build process will ignore it.

use_data_raw()

Then, I moved an example data file (a small simulated dataset) to the “data-raw” directory, and created a “preprocess.R” file in the same directory. Usually, that file would contain the code for pre-processing the data, but for this example that is not needed. That example preprocessing file simply reads in the data file, and runs the following command:

use_data(exampleData)

The above command takes the exampleData object from the R environment (created in the script) and saves the R data object into data/. As a result, your R package now includes a data set called exampleData.

Finally, the resulting R data object should be documented in a standard format by placing a data.R file in the “R” directory. To document your data set, create a file called data.R in the R directory. Then, use roxygen2 (Wickham, Danenberg, and Eugster 2017) documentation syntax to write your data object’s documentation in the R/data.R file. It should look similar to the following for our exampleData object:

#' @title Scores of Group A and Group B
#'
#' @description A data set with the scores of two groups.
#'
#' @format A data frame with 60 rows and 2 variables:
#' \describe{
#'   \item{group}{Participant's group, A or B.}
#'   \item{score}{The participant's score in hypothetical task.}
#' }
#' @source <https://www.github.com/mvuorre/exampleRPackage>
"exampleData"

The key features of this documentation file are (from top to bottom in the above code listing):

Each line begins with a #' to indicate roxygen2 syntax. First, your data set should have a title (@title). The @description field is an optional but highly recommended longer description of the data. For example, what were the collection procedures, who were the respondents, etc. The @format field describes the object (e.g. an R data.frame), its dimensions, and then describes all the variables (e.g. group and score). The @source field includes the source of the data, which could be a citation to an academic article, or a website, for example. Finally, the last line should be the name of the data object in quotation marks. You can document multiple data files in the same R/data.R file; simply leave one blank line between them.

For more details on creating, documenting, and including data sets in R packages, see http://r-pkgs.had.co.nz/data.html.

Create functions

Functions in R packages are portable, such that others can install the package from their R console, load it, and start using the functions immediately. Packages can also depend on other packages (and be depended on), such that R automatically installs any requirements for your functions to work appropriately. Functions within R packages are documented in a standardized manner, and the documentation for a function can be viewed in R (e.g. try ?mean) or online.

Learning and following R conventions for declaring functions has a pedagogical benefit to the researcher and may improve their practices. There is also a reuse benefit: Functions can be difficult to find in old scripts, but easy to find and load if they are called from an existing package. Thus, formally including one’s functions in R packages facilitates reproducibility and sharing.

To include functions in your package, place the functions’ scripts in files in the “R” directory. When you first created your package, that directory was created with an example hello.R script. Open that file in R Studio’s text editor, and delete all the text above the function. Then, in the R Studio menu, click “Code” -> “Insert Roxygen Skeleton”. That creates template documentation into the function’s file, which you can then manually fill to describe your function. exampleRPackage includes an example function, whose source looks like this:

#' Personal greeting
#'
#' @description Greet a person and appropriately capitalize their name.
#'
#' @param name Your name (character string; e.g. "john doe").
#'
#' @return A character string, capitalized to title case.
#' @export
#'
#' @examples
#' hello("james bond")
hello <- function(name = "your name") {
    name <- stringr::str_to_title(name)
    print(paste("Hello,", name))
}

This function, as was the data set above, is documented with roxygen2 syntax. Many of the fields are similar from the above section on data documentation. Here, we also have @param fields, these describe what the function’s arguments are. The @return field describes what the function will return. @export indicates that the function should be exported from your package; that is, made available when you attach the package with library(). There is also an @examples field that can include executable examples of how to use your function. Below the function’s description is the actual code.

For more information on writing functions in R packages, see http://r-pkgs.had.co.nz/r.html.

Finish documentation and build package

We are almost ready with the minimal example package. The only remaining steps are to finish documenting the package, and then to build and install it on your computer.

Your package is now documented in the DESCRIPTION file, and the functions and data are documented in their respective files in the R/ directory. The data and functions were documented with roxygen2 syntax, which must subsequently be translated into R’s documentation files in the man/ directory, and their dependencies must be listed in the NAMESPACE file.

Fortunately, you don’t need to do that manually. First, ensure that R Studio generates documentation with roxygen. Go to Tools -> Project Options… -> Build Tools, and ensure that “Generate documentation with roxygen” is checked, and that “Automatically run roxygen when running install and restart” is checked in the subsequent “Configure” menu. Then, delete the two files, man/hello.Rd and NAMESPACE, which R Studio created automatically when you started your package. Finally, in R Studio’s “Build” tab, click “Install and Restart”.

Doing so automatically writes the documentation in man/, and the appropriate dependencies and your package’s exported functions into the NAMESPACE file, which you subsequently never need to (or should) edit manually. After this, whenever you have edited your documentation, clicking “Install and Restart” will update the documentation files. To read more about documenting your data and functions, please visit http://r-pkgs.had.co.nz/man.html.

Having clicked “Install and Restart” you have also, rather obviously, installed your package and restarted R. If, following this tutorial, you created the hello() function and exampleData data sets, they are now available to you when the package is attached:

library(exampleRPackage)
hello("my name")
#> [1] "Hello, My Name"
head(exampleData)
#>   group     score
#> 1     a  97.18260
#> 2     a  86.87440
#> 3     a 107.95184
#> 4     a 102.70070
#> 5     a  97.22694
#> 6     a  94.33976

And you can view their help pages by prepending their names with a question mark:

?hello
?exampleData

Advanced (optional) steps

Sharing the R package

GitHub

The easiest way to share the package is to create the R package as a Git repository and share it on GitHub (Vuorre and Curley (2018); https://happygitwithr.com/; http://r-pkgs.had.co.nz/git.html). If you followed the tutorial above, Git is already initialized in the package’s repository. After connecting the local Git repository to GitHub, you can use R Studio’s Git panel to stage, commit, push, and pull changes. Once the package’s source code is pushed to GitHub, others can install the package. For example, you can install the example package created in this tutorial:

devtools::install_github("mvuorre/exampleRPackage")

The above command, when executed in R, downloads and installs the exampleRPackage from GitHub user mvuorre. You can view this example R package’s source code on GitHub: https://github.com/mvuorre/exampleRPackage.

Open Science Framework

If you have connected the package’s GitHub repository to an OSF project, you can also install the package from OSF, as done below for this example package:

temporary_file <- tempfile(fileext = ".tar.gz")
download.file("https://osf.io/mqd6f/download", destfile = temporary_file)
install.packages(temporary_file, repos = NULL)

Creating a website for the R package

Once the package’s source code is hosted on GitHub, you can showcase its contents as a website. For example, you can view exampleRPackage’s website at https://mvuorre.github.io/exampleRPackage/. To create websites from your packages, you need the pkgdown R package (Wickham 2017). After installing that package, set up the required files for the website:

use_pkgdown()

Then, To create the website, run:

library(pkgdown)
build_site()

The website is now available at docs/index.html. You can open it and view it locally. However, you will certainly want to upload the website somewhere so that others can access it as well. The easiest option is to host it on GitHub.

Here, we assume that you have created the package in a local Git repository and have pushed the repository to GitHub. Push all the current changes to GitHub, and then go to the package’s GitHub website, click “Settings”, and scroll down to “GitHub Pages”. There, click on the “Source” pull-down menu that currently says “None”, and choose the “master branch /docs folder”. Save the changes. After a little while, the page will be visible at https://username.github.io/packagename. For example, exampleRPackage’s website is at https://mvuorre.github.io/exampleRPackage.

There are many options for customizing the website; see https://pkgdown.r-lib.org.

Provide feedback

Saved searches

Use saved searches to filter your results more quickly

Repository files navigation

exampleRPackage

Introduction

R Package tutorial

Create a package with R Studio

Describe the package

Readme

Add data

Create functions

Finish documentation and build package

Advanced (optional) steps

Sharing the R package

GitHub

Open Science Framework

Creating a website for the R package

Other content

Further Reading

Online Resources

References

About

Releases

Packages

Languages

Name		Name	Last commit message	Last commit date
Latest commit History 39 Commits
R		R
data-raw		data-raw
data		data
docs		docs
man		man
vignettes		vignettes
.Rbuildignore		.Rbuildignore
.gitignore		.gitignore
DESCRIPTION		DESCRIPTION
LICENSE		LICENSE
NAMESPACE		NAMESPACE
NEWS.md		NEWS.md
README.Rmd		README.Rmd
README.md		README.md
_pkgdown.yml		_pkgdown.yml
exampleRPackage.Rproj		exampleRPackage.Rproj
references.bib		references.bib

License

mvuorre/exampleRPackage

Folders and files

Latest commit

History

Repository files navigation

exampleRPackage

Introduction

R Package tutorial

Create a package with R Studio

Describe the package

Readme

Add data

Create functions

Finish documentation and build package

Advanced (optional) steps

Sharing the R package

GitHub

Open Science Framework

Creating a website for the R package

Other content

Further Reading

Online Resources

References

About

Topics

Resources

License

Stars

Watchers

Forks

Releases

Packages 0

Languages

Packages