🥷 Madara: Starknet Client

Madara is a powerful Starknet client written in Rust.

Table of Contents

• ⬇️ Installation
  • Run from Source
  • Run with Docker
• ⚙️ Configuration
  • Basic Command-Line Options
  • Environment variables
• 🌐 Interactions
  • Supported JSON-RPC Methods
  • Madara-specific JSON-RPC Methods
  • Example of Calling a JSON-RPC Method
• ✅ Supported Features
  • Starknet Compliant
  • Feeder-Gateway State Synchronization
  • State Commitment Computation
  • Database Migration
• 💬 Get in touch
  • Contributing
  • Partnerships

⬇️ Installation

⬅️ back to top

Run from Source

1. Install dependencies

Ensure you have all the necessary dependencies available on your host system.

Dependency	Version	Installation
Rust	rustc 1.81	curl --proto '=https' --tlsv1.2 -sSf https://sh.rustup.rs | sh
Clang	Latest	sudo apt-get install clang
Openssl	0.10	sudo apt install openssl

Once all dependencies are satisfied, you can clone the Madara repository:

cd <your-destination-path>
git clone https://github.com/madara-alliance/madara .

2. Build Madara

You can choose between different build modes:

• Debug (low performance, fastest builds, for testing purposes only):

  cargo build

• Release (fast performance, slower build times):

  cargo build --release

• Production (fastest performance, very slow build times):

  cargo build --profile=production

3. Run Madara

Start the Madara client with a basic set of arguments depending on your chosen mode:

Full Node

Synchronizes the state of the chain from genesis.

cargo run --release --        \
  --name Madara               \
  --full                      \
  --base-path /var/lib/madara \
  --network mainnet           \
  --l1-endpoint ${ETHEREUM_API_URL}

Sequencer

Produces new blocks for other nodes to synchronize.

cargo run --release --        \
  --name Madara               \
  --sequencer                 \
  --base-path /var/lib/madara \
  --preset test               \
  --l1-endpoint ${ETHEREUM_API_URL}

Devnet

A node in a private local network.

cargo run --release --        \
  --name Madara               \
  --devnet                    \
  --base-path /var/lib/madara \
  --preset test

Note

Head to the Configuration section to learn more about customizing your node.

4. Presets

You can use cli presets for certain common node configurations, for example enabling rpc endpoints:

cargo run --release -- \
   --name Madara       \
   --full              \
   --preset mainnet    \
   --rpc

...or the madara feeder gateway:

cargo run --release -- \
   --name Madara       \
   --full              \
   --preset mainnet    \
   --fgw

---

Run with Docker

1. Manual Setup

Dependency	Version	Installation
Docker	Latest	Official instructions

Once you have Docker installed, you will need to pull the madara image from the github container registry (ghr):

docker pull ghcr.io/madara-alliance/madara:latest
docker tag ghcr.io/madara-alliance/madara:latest madara:latest
docker rmi ghcr.io/madara-alliance/madara:latest

You can then launch madara as follows:

docker run -d                    \
  -p 9944:9944                   \
  -v /var/lib/madara:/tmp/madara \
  --name Madara                  \
  madara:latest                  \
  --name Madara                  \
  --full                         \
  --network mainnet              \
  --l1-endpoint ${ETHEREUM_API_URL}

To display the node's logs, you can use:

docker logs -f -n 100 Madara

Warning

Make sure to change the volume -v of your container if ever you update --base-path.

2. Using the project Makefile

Alternatively, you can use the provided Makefile and compose.yaml to simplify this process.

Dependency	Version	Installation
Docker Compose	Latest	Official instructions
Gnu Make	Latest	sudo apt install make

Once you have all the dependencies installed, start by saving your rpc key to a .secrets forlder:

mkdir .secrets
echo *** .secrets/rpc_api.secret

Then, run madara with the following commands:

make start    # This will automatically pull the madara image if not available
make logs     # Displays the last 100 lines of logs
make stop     # Stop the madara node
make clean-db # Removes the madara db, including files on the host
make restart  # Restarts the madara node

Important

By default, make start will try and restart Madara indefinitely if it is found to be unhealthy using docker autoheal. This is done by checking the availability of http://localhost:9944/health, which means your container will be marked as unhealthy and restart if you have disabled the RPC service! You can run watch docker ps to monitor the health of your containers.

To change runtime arguments, you can update the script in madara-runner.sh:

#!/bin/sh
export RPC_API_KEY=$(cat $RPC_API_KEY_FILE)

./madara                   \
  --name madara            \
  --network mainnet        \
  --rpc-external           \
  --rpc-cors all           \
  --full                   \
  --l1-endpoint $RPC_API_KEY

For more information, run:

make help

Tip

When running Madara from a docker container, make sure to set options such as --rpc-external, --gateway-external and --rpc-admin-external so as to be able to access these services from outside the container.

⚙️ Configuration

⬅️ back to top

For a comprehensive list of all command-line options, check out:

cargo run -- --help

Or if you are using docker, simply:

docker run madara:latest --help

---

Basic Command-Line Options

Here are some recommended options to get up and started with your Madara client:

Option	About
--name <NAME>	The human-readable name for this node. It's used as the network node name.
--base-path <PATH>	Sets the database location for Madara (default is/tmp/madara)
--full	The mode of your Madara client (either --sequencer, --full, or --devnet)
--l1-endpoint <URL>	The Layer 1 endpoint the node will verify its state from
--rpc-port <PORT>	The JSON-RPC server TCP port, used to receive requests
--rpc-cors <ORIGINS>	Browser origins allowed to make calls to the RPC servers
--rpc-external	Exposes the rpc service on 0.0.0.0

---

Environment Variables

Each cli argument has its own corresponding environment variable you can set to change its value. For example:

• MADARA_BASE_PATH=/path/to/db
• MADARA_RPC_PORT=1111

These variables allow you to adjust the node's configuration without using command-line arguments, which can be useful in CI pipelines or with docker.

Note

If the command-line argument is specified then it takes precedent over the environment variable.

🌐 Interactions

⬅️ back to top

Madara fully supports all the JSON-RPC methods as of the latest version of the Starknet mainnet official JSON-RPC specs. These methods can be categorized into three main types: Read-Only Access Methods, Trace Generation Methods, and Write Methods. They are accessible through port 9944 unless specified otherwise with --rpc-port.

Tip

You can use the special rpc_methods call to view a list of all the methods which are available on an endpoint.

---

Supported JSON-RPC Methods

Here is a list of all the supported methods with their current status:

Read Methods

Status	Method
✅	starknet_specVersion
✅	starknet_getBlockWithTxHashes
✅	starknet_getBlockWithTxs
✅	starknet_getBlockWithReceipts
✅	starknet_getStateUpdate
✅	starknet_getStorageAt
✅	starknet_getTransactionStatus
✅	starknet_getTransactionByHash
✅	starknet_getTransactionByBlockIdAndIndex
✅	starknet_getTransactionReceipt
✅	starknet_getClass
✅	starknet_getClassHashAt
✅	starknet_getClassAt
✅	starknet_getBlockTransactionCount
✅	starknet_call
✅	starknet_estimateFee
✅	starknet_estimateMessageFee
✅	starknet_blockNumber
✅	starknet_blockHashAndNumber
✅	starknet_chainId
✅	starknet_syncing
✅	starknet_getEvents
✅	starknet_getNonce
✅	starknet_getCompiledCasm (v0.8.0)
🚧	starknet_getMessageStatus (v0.8.0)
🚧	starknet_getStorageProof (v0.8.0)

Trace Methods

Status	Method
✅	starknet_traceTransaction
✅	starknet_simulateTransactions
✅	starknet_traceBlockTransactions

Write Methods

Status	Method
✅	starknet_addInvokeTransaction
✅	starknet_addDeclareTransaction
✅	starknet_addDeployAccountTransaction

Websocket Methods

Status	Method
✅	starknet_unsubscribe (v0.8.0)
✅	starknet_subscribeNewHeads (v0.8.0)
❌	starknet_subscribeEvents (v0.8.0)
❌	starknet_subscribeTransactionStatus (v0.8.0)
❌	starknet_subscribePendingTransactions (v0.8.0)
❌	starknet_subscriptionReorg (v0.8.0)

Important

Write methods are forwarded to the Sequencer and are not executed by Madara. These might fail if you provide the wrong arguments or in case of a conflicting state. Make sure to refer to the Starknet JSON-RPC specs for a list of potential errors.

Madara-specific JSON-RPC Methods

As well as the official RPC methods, Madara also supports its own set of custom extensions to the starknet specs. These are referred to as admin methods and are exposed on a separate port 9943 unless specified otherwise with --rpc-admin-port.

Write Methods

Method	About
madara_addDeclareV0Transaction	Adds a legacy Declare V0 Transaction to the state

Status Methods

Method	About
madara_ping	Return the unix time at which this method was called
madara_shutdown	Gracefully stops the running node
madara_rpcDisable	Disables user-facing rpc services
madara_rpcEnable	Enables user-facing rpc services
madara_rpcRestart	Restarts user-facing rpc services
madara_syncDisable	Disables l1 and l2 sync services
madara_syncEnable	Enables l1 and l2 sync services
madara_syncRestart	Restarts l1 and l2 sync services

Websocket Methods

Method	About
madara_pulse	Periodically sends a signal that the node is alive

Caution

These methods are exposed on locahost by default for obvious security reasons. You can always exposes them externally using --rpc-admin-external, but be very careful when doing so as you might be compromising your node! Madara does not do any authorization checks on the caller of these methods and instead leaves it up to the user to set up their own proxy to handle these situations.

---

Example of Calling a JSON-RPC Method

You can use any JSON-RPC client to interact with Madara, such as curl, httpie, websocat or any client sdk in your preferred programming language. For more detailed information on how to call each method, please refer to the Starknet JSON-RPC specs.

Http RPC

Dependency	Version	Installation
Curl	Latest	sudo apt install curl

Here is an example of how to call a JSON-RPC method using Madara. Before running the bellow code, make sure you have a node running with rpc enabled on port 9944 (this is the default configuration).

Important

Madara currently defaults to v0.7.1 for its rpc calls. To access methods in other or more recent versions, add rpc/v*_*_*/ to your rpc url. This Also works for websocket methods.

curl --location 'localhost:9944'/v0_7_1/    \
  --header 'Content-Type: application/json' \
  --data '{
    "jsonrpc": "2.0",
    "method": "rpc_methods",
    "params": [],
    "id": 1
  }' | jq --sort-keys

You should receive something like the following:

{
  "id": 1,
  "jsonrpc": "2.0",
  "result": {
    "methods": [
      "rpc/V0_7_1/starknet_addDeclareTransaction",
      "rpc/V0_7_1/starknet_addDeployAccountTransaction",
      "rpc/V0_7_1/starknet_addInvokeTransaction",
      ...
      "rpc/V0_8_0/starknet_traceBlockTransactions",
      "rpc/V0_8_0/starknet_traceTransaction",
      "rpc/V0_8_0/starknet_unsubscribe",
      "rpc/rpc_methods"
    ]
  }
}

Websocket RPC

Dependency	Version	Installation
Websocat	Latest	Official instructions

Websockets methods are enabled by default and are accessible through the same port as http RPC methods. Here is an example of how to call a JSON-RPC method using websocat.

(echo '{"jsonrpc":"2.0","method":"starknet_subscribeNewHeads","params":{"block_id":"latest"},"id":1}'; cat -) | \
websocat -v ws://localhost:9944/rpc/v0_8_0

Tip

This command and the strange use of echo in combination with cat is just a way to start a websocket stream with websocat while staying in interactive mode, meaning you can still enter other websocket requests.

This will display header information on each new block synchronized. Use Ctrl-C to stop the subscription. Alternatively, you can achieve the same result more gracefully by calling starknet_unsubscribe. Paste the following into the subscription stream:

{ "jsonrpc": "2.0", "method": "starknet_unsubscribe", "params": ["your-subscription-id"], "id": 1 }

Where you-subscription-id corresponds to the value of the subscription field which is returned with each websocket response.

✅ Supported Features

⬅️ back to top

Starknet compliant

Madara is compliant with the latest v0.13.2 version of Starknet and v0.7.1 JSON-RPC specs. You can find out more about this in the interactions section or at the official Starknet JSON-RPC specs.

Feeder-Gateway State Synchronization

Madara supports its own implementation of the Starknet feeder gateway, which allows nodes to synchronize state from each other at much faster speeds than a regular sync.

Note

Starknet does not currently have a specification for its feeder-gateway protocol, so despite our best efforts at output parity, you might still notice some discrepancies between official feeder gateway endpoints and our own implementation. Please let us know about if you encounter this by raising an issue

State Commitment Computation

Madara supports merkelized state verification through its own implementation of Besu Bonsai Merkle Tries. See the bonsai lib. You can read more about Starknet Block structure and how it affects state commitment here.

Database Migration

When migration to a newer version of Madara you might need to update your database. Instead of re-synchronizing the entirety of your chain's state from genesis, you can use Madara's warp update feature.

Note

Warp update requires an already synchronized local node with a working database.

To begin the database migration, you will need to start an existing node with admin methods and feeder gateway enabled. This will be the source of the migration. You can do this with the --warp-update-sender preset:

cargo run --releasae -- \
  --name Sender         \
  --full                \ # This also works with other types of nodes
  --network mainnet     \
  --warp-update-sender

You will then need to start a second node to synchronize the state of your database:

cargo run --releasae --       \
  --name Receiver             \
  --base-path /tmp/madara_new \ # Where you want the new database to be stored
  --full                      \
  --network mainnet           \
  --l1-endpoint https://***   \
  --warp-update-receiver

This will start generating a new up-to-date database under /tmp/madara_new. Once this process is over, the warp update sender node will automatically shutdown while the warp update receiver will take its place.

Warning

As of now, the warp update receiver has its rpc disabled, even after the migration process has completed. This will be fixed in the future, so that services that would otherwise conflict with the sender node will automatically start after the migration has finished, allowing for migrations with 0 downtime.

💬 Get in touch

⬅️ back to top

Contributing

For guidelines on how to contribute to Madara, please see the Contribution Guidelines.

Partnerships

To establish a partnership with the Madara team, or if you have any suggestions or special requests, feel free to reach us on Telegram.

License

Madara is open-source software licensed under the Apache-2.0 License.