-
pulling:
docker pull 3mdeb/esp-open-sdk -
running:
So far this container was used for building esp-open-rtos projects
git clone --recursive https://github.com/Superhouse/esp-open-rtos.git
cd esp-open-rtos
docker run -it --device=/dev/ttyUSB0 -v ${PWD}:/home/build \
3mdeb/esp-open-sdk make flash -C examples/blink ESPPORT=/dev/ttyUSB0
In case of access errors such as:
serial.serialutil.SerialException: [Errno 13] could not open port /dev/ttyUSB0: [Errno 13] Permission denied: '/dev/ttyUSB0'
../../common.mk:247: recipe for target 'flash' failed
make: *** [flash] Error 1
make: Leaving directory '/home/build/examples/blink'
Provide udev rules for your tty device, such as:
echo 'SUBSYSTEM =="tty", ATTRS{idVendor}=="10c4", ATTRS{idProduct}=="ea60" , MODE="0666"' \
| sudo tee /etc/udev/rules.d/52-esp-serial.rules
Building for container development only. Otherwise using docker pull is
advised.
-
building:
git clone [email protected]:3mdeb/esp-open-sdk-docker.git cd esp-opensdk-docker docker build -t 3mdeb/esp-open-sdk .