Merge branch 'mlxsw'

Jiri Pirko says:

====================
Introduce Mellanox Technologies Switch ASICs switchdev drivers

This patchset introduces Mellanox Technologies Switch driver infrastructure
and support for SwitchX-2 ASIC.

The driver is divided into 3 logical parts:
1) Bus - implements switch bus interface. Currently only PCI bus is
   implemented, but more buses will be added in the future. Namely I2C
   and SGMII.
   (patch #2)
2) Driver - implemements of ASIC-specific functions.
   Currently SwitchX-2 ASIC is supported, but a plan exists to introduce
   support for Spectrum ASIC in the near future.
   (patch #4)
3) Core - infrastructure that glues buses and drivers together.
   It implements register access logic (EMADs) and takes care of RX traps
   and events.
   (patch #1 and #3)
====================

Signed-off-by: David S. Miller <[email protected]>

MAINTAINERS

@@ -6645,6 +6645,15 @@ W:	http://www.mellanox.com
 Q:	http://patchwork.ozlabs.org/project/netdev/list/
 F:	drivers/net/ethernet/mellanox/mlx4/en_*
 
+MELLANOX ETHERNET SWITCH DRIVERS
+M:	Jiri Pirko <[email protected]>
+M:	Ido Schimmel <[email protected]>
+L:	[email protected]
+S:	Supported
+W:	http://www.mellanox.com
+Q:	http://patchwork.ozlabs.org/project/netdev/list/
+F:	drivers/net/ethernet/mellanox/mlxsw/
+
 MEMORY MANAGEMENT
 L:	[email protected]
 W:	http://www.linux-mm.org

drivers/net/ethernet/mellanox/Kconfig

@@ -18,5 +18,6 @@ if NET_VENDOR_MELLANOX
 
 source "drivers/net/ethernet/mellanox/mlx4/Kconfig"
 source "drivers/net/ethernet/mellanox/mlx5/core/Kconfig"
+source "drivers/net/ethernet/mellanox/mlxsw/Kconfig"
 
 endif # NET_VENDOR_MELLANOX

drivers/net/ethernet/mellanox/Makefile

@@ -4,3 +4,4 @@
 
 obj-$(CONFIG_MLX4_CORE) += mlx4/
 obj-$(CONFIG_MLX5_CORE) += mlx5/core/
+obj-$(CONFIG_MLXSW_CORE) += mlxsw/

drivers/net/ethernet/mellanox/mlxsw/Kconfig

@@ -0,0 +1,32 @@
+#
+# Mellanox switch drivers configuration
+#
+
+config MLXSW_CORE
+	tristate "Mellanox Technologies Switch ASICs support"
+	---help---
+	  This driver supports Mellanox Technologies Switch ASICs family.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called mlxsw_core.
+
+config MLXSW_PCI
+	tristate "PCI bus implementation for Mellanox Technologies Switch ASICs"
+	depends on PCI && MLXSW_CORE
+	default m
+	---help---
+	  This is PCI bus implementation for Mellanox Technologies Switch ASICs.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called mlxsw_pci.
+
+config MLXSW_SWITCHX2
+	tristate "Mellanox Technologies SwitchX-2 support"
+	depends on MLXSW_CORE && NET_SWITCHDEV
+	default m
+	---help---
+	  This driver supports Mellanox Technologies SwitchX-2 Ethernet
+	  Switch ASICs.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called mlxsw_switchx2.

drivers/net/ethernet/mellanox/mlxsw/Makefile

@@ -0,0 +1,6 @@
+obj-$(CONFIG_MLXSW_CORE)	+= mlxsw_core.o
+mlxsw_core-objs			:= core.o
+obj-$(CONFIG_MLXSW_PCI)		+= mlxsw_pci.o
+mlxsw_pci-objs			:= pci.o
+obj-$(CONFIG_MLXSW_SWITCHX2)	+= mlxsw_switchx2.o
+mlxsw_switchx2-objs		:= switchx2.o