Merge pull request #52 from Qrome/2.2

2.2

.gitignore

@@ -0,0 +1,2 @@
+
+printermonitor/my_Settings.h

README.md

@@ -109,7 +109,8 @@ Please do not feel obligated, but donations and tips are warmly welcomed.  I hav
 
 ## Contributors
 David Payne  
-Daniel Eichhorn -- Author of the TimeClient class and OLEDDisplayUi . 
+Daniel Eichhorn -- Author of the TimeClient class and OLEDDisplayUi  
+Florian Schütte -- added flip display to web interface  
 
 Contributing to this software is warmly welcomed. You can do this basically by
 forking from master, committing modifications and then making a pulling requests to be reviewed (follow the links above

printermonitor/Settings.h

@@ -70,6 +70,7 @@ boolean IS_METRIC = false; // false = Imperial and true = Metric
 
 const int WEBSERVER_PORT = 80; // The port you can access this device on over HTTP
 const boolean WEBSERVER_ENABLED = true;  // Device will provide a web interface via http://[ip]:[port]/
+boolean IS_BASIC_AUTH = true;  // true = require athentication to change configuration settings / false = no auth
 char* www_username = "admin";  // User account for the Web Interface
 char* www_password = "password";  // Password for the Web Interface
 float UtcOffset = -7; // Hour offset from GMT for your timezone
@@ -81,8 +82,8 @@ boolean DISPLAYCLOCK = true;   // true = Show Clock when not printing / false =
 const int I2C_DISPLAY_ADDRESS = 0x3c; // I2C Address of your Display (usually 0x3c or 0x3d)
 const int SDA_PIN = D2;
 const int SCL_PIN = D5;
-const boolean INVERT_DISPLAY = false; // true = pins at top | false = pins at the bottom
-//#define DISPLAY_SH1106       // Uncomment this line to use the SH1106 display -- SSD1306 is used by default and is most common
+boolean INVERT_DISPLAY = false; // true = pins at top | false = pins at the bottom
+#define DISPLAY_SH1106       // Uncomment this line to use the SH1106 display -- SSD1306 is used by default and is most common
 
 boolean ENABLE_OTA = true;     // this will allow you to load firmware to the device over WiFi (see OTA for ESP8266)
 String OTA_Password = "";      // Set an OTA password here -- leave blank if you don't want to be prompted for password

printermonitor/printermonitor.ino

@@ -1,4 +1,4 @@
- /** The MIT License (MIT)
+/** The MIT License (MIT)
 
 Copyright (c) 2018 David Payne
 
@@ -27,7 +27,7 @@ SOFTWARE.
 
 #include "Settings.h"
 
-#define VERSION "2.1"
+#define VERSION "2.2"
 
 #define HOSTNAME "OctMon-" 
 #define CONFIG "/conf.txt"
@@ -112,9 +112,11 @@ String CHANGE_FORM =  "<form class='w3-container' action='/updateconfig' method=
                       "<p><label>OctoPrint Password </label><input class='w3-input w3-border w3-margin-bottom' type='password' name='octoPass' value='%OCTOPASS%'></p><hr>"
                       "<p><input name='isClockEnabled' class='w3-check w3-margin-top' type='checkbox' %IS_CLOCK_CHECKED%> Display Clock when printer is off</p>"
                       "<p><input name='is24hour' class='w3-check w3-margin-top' type='checkbox' %IS_24HOUR_CHECKED%> Use 24 Hour Clock (military time)</p>"
+                      "<p><input name='invDisp' class='w3-check w3-margin-top' type='checkbox' %IS_INVDISP_CHECKED%> Flip display orientation</p>"
                       "<p>Clock Sync / Weather Refresh (minutes) <select class='w3-option w3-padding' name='refresh'>%OPTIONS%</select></p>"
                       "<p>Theme Color <select class='w3-option w3-padding' name='theme'>%THEME_OPTIONS%</select></p>"
                       "<p><label>UTC Time Offset</label><input class='w3-input w3-border w3-margin-bottom' type='text' name='utcoffset' value='%UTCOFFSET%' maxlength='12'></p><hr>"
+                      "<p><input name='isBasicAuth' class='w3-check w3-margin-top' type='checkbox' %IS_BASICAUTH_CHECKED%> Use Security Credentials for Configuration Changes</p>"
                       "<p><label>User ID (for this interface)</label><input class='w3-input w3-border w3-margin-bottom' type='text' name='userid' value='%USERID%' maxlength='20'></p>"
                       "<p><label>Password </label><input class='w3-input w3-border w3-margin-bottom' type='password' name='stationpassword' value='%STATIONPASSWORD%'></p>"
                       "<button class='w3-button w3-block w3-grey w3-section w3-padding' type='submit'>Save</button></form>";
@@ -285,13 +287,13 @@ void setup() {
     display.drawString(64, 20, "Enable in Settings.h");
     display.display(); 
   }
-
   flashLED(5, 500);
   findMDNS();  //go find Octoprint Server by the hostname
+  Serial.println("*** Leaving setup()");
 }
 
 void findMDNS() {
-  if (OctoPrintHostName == "") {
+  if (OctoPrintHostName == "" || ENABLE_OTA == false) {
     return; // nothing to do here
   }
   // We now query our network for 'web servers' service
@@ -373,8 +375,15 @@ void getUpdateTime() {
   digitalWrite(externalLight, HIGH);  // turn off the LED
 }
 
+boolean authentication() {
+  if (IS_BASIC_AUTH && (strlen(www_username) >= 1 && strlen(www_password) >= 1)) {
+    return server.authenticate(www_username, www_password);
+  } 
+  return true; // Authentication not required
+}
+
 void handleSystemReset() {
-  if (!server.authenticate(www_username, www_password)) {
+  if (!authentication()) {
     return server.requestAuthentication();
   }
   Serial.println("Reset System Configuration");
@@ -385,7 +394,7 @@ void handleSystemReset() {
 }
 
 void handleUpdateWeather() {
-  if (!server.authenticate(www_username, www_password)) {
+  if (!authentication()) {
     return server.requestAuthentication();
   }
   DISPLAYWEATHER = server.hasArg("isWeatherEnabled");
@@ -400,7 +409,8 @@ void handleUpdateWeather() {
 }
 
 void handleUpdateConfig() {
-  if (!server.authenticate(www_username, www_password)) {
+  boolean flipOld = INVERT_DISPLAY;
+  if (!authentication()) {
     return server.requestAuthentication();
   }
   OctoPrintApiKey = server.arg("octoPrintApiKey");
@@ -411,6 +421,7 @@ void handleUpdateConfig() {
   OctoAuthPass = server.arg("octoPass");
   DISPLAYCLOCK = server.hasArg("isClockEnabled");
   IS_24HOUR = server.hasArg("is24hour");
+  INVERT_DISPLAY = server.hasArg("invDisp");
   minutesBetweenDataRefresh = server.arg("refresh").toInt();
   themeColor = server.arg("theme");
   UtcOffset = server.arg("utcoffset").toFloat();
@@ -421,13 +432,19 @@ void handleUpdateConfig() {
   writeSettings();
   findMDNS();
   printerClient.getPrinterJobResults();
+  if (INVERT_DISPLAY != flipOld) {
+    ui.init();
+    if(INVERT_DISPLAY)     
+      display.flipScreenVertically();
+    ui.update();
+  }
   checkDisplay();
   lastEpoch = 0;
   redirectHome();
 }
 
 void handleWifiReset() {
-  if (!server.authenticate(www_username, www_password)) {
+  if (!authentication()) {
     return server.requestAuthentication();
   }
   //WiFiManager
@@ -439,7 +456,7 @@ void handleWifiReset() {
 }
 
 void handleWeatherConfigure() {
-  if (!server.authenticate(www_username, www_password)) {
+  if (!authentication()) {
     return server.requestAuthentication();
   }
   digitalWrite(externalLight, LOW);
@@ -479,7 +496,7 @@ void handleWeatherConfigure() {
 }
 
 void handleConfigure() {
-  if (!server.authenticate(www_username, www_password)) {
+  if (!authentication()) {
     return server.requestAuthentication();
   }
   digitalWrite(externalLight, LOW);
@@ -512,13 +529,23 @@ void handleConfigure() {
     is24hourChecked = "checked='checked'";
   }
   form.replace("%IS_24HOUR_CHECKED%", is24hourChecked);
+  String isInvDisp = "";
+  if (INVERT_DISPLAY) {
+    isInvDisp = "checked='checked'";
+  }
+  form.replace("%IS_INVDISP_CHECKED%", isInvDisp);
   String options = "<option>10</option><option>15</option><option>20</option><option>30</option><option>60</option>";
   options.replace(">"+String(minutesBetweenDataRefresh)+"<", " selected>"+String(minutesBetweenDataRefresh)+"<");
   form.replace("%OPTIONS%", options);
   String themeOptions = COLOR_THEMES;
   themeOptions.replace(">"+String(themeColor)+"<", " selected>"+String(themeColor)+"<");
   form.replace("%THEME_OPTIONS%", themeOptions);
   form.replace("%UTCOFFSET%", String(UtcOffset));
+  String isUseSecurityChecked = "";
+  if (IS_BASIC_AUTH) {
+    isUseSecurityChecked = "checked='checked'";
+  }
+  form.replace("%IS_BASICAUTH_CHECKED%", isUseSecurityChecked);
   form.replace("%USERID%", String(www_username));
   form.replace("%STATIONPASSWORD%", String(www_password));
 
@@ -933,10 +960,12 @@ void writeSettings() {
     f.println("octoPass=" + OctoAuthPass);
     f.println("refreshRate=" + String(minutesBetweenDataRefresh));
     f.println("themeColor=" + themeColor);
+    f.println("IS_BASIC_AUTH=" + String(IS_BASIC_AUTH));
     f.println("www_username=" + String(www_username));
     f.println("www_password=" + String(www_password));
     f.println("DISPLAYCLOCK=" + String(DISPLAYCLOCK));
     f.println("is24hour=" + String(IS_24HOUR));
+    f.println("invertDisp=" + String(INVERT_DISPLAY));
     f.println("isWeather=" + String(DISPLAYWEATHER));
     f.println("weatherKey=" + WeatherApiKey);
     f.println("CityID=" + String(CityIDs[0]));
@@ -1000,6 +1029,10 @@ void readSettings() {
       themeColor.trim();
       Serial.println("themeColor=" + themeColor);
     }
+    if (line.indexOf("IS_BASIC_AUTH=") >= 0) {
+      IS_BASIC_AUTH = line.substring(line.lastIndexOf("IS_BASIC_AUTH=") + 14).toInt();
+      Serial.println("IS_BASIC_AUTH=" + String(IS_BASIC_AUTH));
+    }
     if (line.indexOf("www_username=") >= 0) {
       String temp = line.substring(line.lastIndexOf("www_username=") + 13);
       temp.trim();
@@ -1020,6 +1053,10 @@ void readSettings() {
       IS_24HOUR = line.substring(line.lastIndexOf("is24hour=") + 9).toInt();
       Serial.println("IS_24HOUR=" + String(IS_24HOUR));
     }
+    if(line.indexOf("invertDisp=") >= 0) {
+      INVERT_DISPLAY = line.substring(line.lastIndexOf("invertDisp=") + 11).toInt();
+      Serial.println("INVERT_DISPLAY=" + String(INVERT_DISPLAY));
+    }
     if (line.indexOf("isWeather=") >= 0) {
       DISPLAYWEATHER = line.substring(line.lastIndexOf("isWeather=") + 10).toInt();
       Serial.println("DISPLAYWEATHER=" + String(DISPLAYWEATHER));