From b73fc8b795d844a115f1f55b90114d94a80ddda2 Mon Sep 17 00:00:00 2001 From: "Pim Borman (home)" Date: Sat, 24 Dec 2022 18:38:14 +0100 Subject: [PATCH] added ex 2.2, 2.3 --- Chapter2.tex | 32 ++++++++++++++++++++++++++++++-- 1 file changed, 30 insertions(+), 2 deletions(-) diff --git a/Chapter2.tex b/Chapter2.tex index b318544..4a00f3a 100644 --- a/Chapter2.tex +++ b/Chapter2.tex @@ -20,9 +20,37 @@ \chapter{Solutions for Chapter 2} So the minimum current gain must be \[\beta_\text{min} = \frac{I^{*}_\text{LED}}{I_\text{B}} \approx \frac{\SI{4.85}{\mA}}{\SI{270}{\uA}} \approx \mans{18.0}\] -\todoex{2.2} +\ex{2.2} +Before the pulse, $V_\text{in} = V^{Q_1}_\text{B} = \SI{0}{\V}$, therefore transistor $Q_1$ is turned off, so $V^{Q_1}_\text{C} = \SI{5}{\V}$. +Transistor $Q_2$ is turned on through $R_3$ and has $V^{Q_2}_\text{B} = \SI{0.6}{\V}$, +$I^{Q_2}_\text{B} = \frac{\SI{4.4}{\V}}{\SI{10}{\kohm}} = \SI{0.44}{\mA}$. +Since $R_2$ is only $\SI{10}{\kohm}$, $Q_2$ is saturated and $V_\text{out} = \SI{0}{\V}$. +The potential difference accross the capacitor is \[\Delta V_{C_1} = V^{Q_1}_\text{C} - V^{Q_2}_\text{B} = \SI{4.4}{\V}\] + +Right after the pulse, $Q_1$ turns on, having $V^{Q_1}_\text{B} = \SI{0.6}{\V}$ and $I^{Q_1}_\text{B} = \frac{\SI{4.4}{\V}}{\SI{10}{\kohm}} = \SI{0.44}{\mA}$. +Since $R_2$ is only $\SI{1}{\kohm}$, $Q_1$ saturates and has $V^{Q_1}_\text{C} = \SI{0}{\V}$. +To keep the potential difference over $C_1$ the same, $V^{Q_2}_\text{B} = \SI{-4.4}{\V}$. This causes $Q_2$ to instantaneously turn off, resulting in $V_\text{out} = \SI{5}{\V}$. + +While $V_\text{in}$ is high, $C_1$ starts charging through $R_3$ untill $V^{Q_2}_\text{B}=\SI{0.6}{\V}$, after which $Q_2$ turns on again. +Before that $C_1$ charges as if $Q_2$ was not connected. +\[V^{Q_1}_\text{B}(t) = V_\text{CC}-[V_\text{CC}-V^{Q_1}_\text{B}(0)] e^{t/R_3C_1} = \SI{5}{\V}-\SI{9.4}{\V} e^{t/R_3C_1}\] +where $t=0$ is the start of the pulse. +The pulse stops when $Q_2$ turns on so +\[V^{Q_1}_\text{B}{\tau_\text{pulse}}=\SI{0.6}{\V} = \SI{5}{\V}-\SI{9.4}{V} e^{\tau_\text{pulse}/R_3C_1}\] +Solving for $\tau_\text{pulse}$ gives +\[\tau_\text{pulse} = \mans{0.76 R_3 C_1} = \mans{\SI{76}{\us}}\] + +\ex{2.3} +During the pulse $V_\text{out}$ is high, turning $Q_3$ on: $V^{Q_3}_\text{B} = \SI{0.6}{\V}$. +$R_4$ and $R_5$ form a voltage divider such that the output is +\[V_\text{out} = (V_\text{CC}-V^{Q_3}_\text{B})\frac{R_5}{R_5+R_4}+V^{Q_3}_\text{B} = \SI{4.8}{\V}\] +The output is therefore reduced by $\mans{\SI{0.2}{\V}}$. A high value $R_5$ keeps this drop low. + +For $Q_3$ to stay saturated it has to be able to drain a collector current of at least $\frac{V_\text{CC}}{R_2}=\SI{5}{\mA}$, such that we must have $I^{Q_3}_\text{B} \geq \frac{\SI{5}{\mA}}{\beta}$. So we have $I^{Q_3}_\text{B} = \frac{V_\text{out}-V^{Q_3}_\text{B}}{R_5} = \frac{\SI{4.8}{\V}-\SI{0.6}{\V}}{\SI{20}{\kohm}} = \SI{0.21}{\mA} \geq \frac{\SI{5}{\mA}}{\beta}$. +The resulting minimum $\beta$ is therefore +\[\mans{\beta_\text{min} \geq 24}\] +In practice you probably want a larger $\beta$ to account for the additional voltage drop and hence $Q_3$ base current drop that a load will cause. -\todoex{2.3} \todoex{2.4}