Hi all,

Had an issue on a shelly 3rd gen, where I had added 2 Bluetooth devices and 2 number components for local scripting.
But the number components didn't show up in HomeAssistant.

Found that the method Shelly.GetComponents use paging, but this is not implemented in shelly device initialize in this library.

Example response from Shelly.GetComponents:
{'id': 4, 'src': 'shelly1pmminig3-', 'dst': 'aios-139794151391312', 'result':
{'components': [
{'key': 'bthomedevice:200', 'status': {'id': 200, 'rssi': None, 'battery': None, 'packet_id': None, 'last_updated_ts': 0}, 'config': {'id': 200, 'addr': '', 'name': 'Window_Bathroom_Up', 'key': None, 'meta': {'ui': {'view': 'regular', 'local_name': 'SBDW-002C', 'icon': None}}}},
{'key': 'bthomedevice:201', 'status': {'id': 201, 'rssi': -33, 'battery': 96, 'packet_id': 48, 'last_updated_ts': 1727518506}, 'config': {'id': 201, 'addr': '', 'name': 'Humidity-bathroom', 'key': None, 'meta': {'ui': {'view': 'regular', 'icon': None}}}},
{'key': 'bthomesensor:200', 'status': {'id': 200, 'value': None, 'last_updated_ts': 0}, 'config': {'id': 200, 'addr': '', 'name': None, 'obj_id': 1, 'idx': 0, 'meta': None}},
{'key': 'bthomesensor:201', 'status': {'id': 201, 'value': None, 'last_updated_ts': 0}, 'config': {'id': 201, 'addr': '', 'name': None, 'obj_id': 5, 'idx': 0, 'meta': None}},
{'key': 'bthomesensor:202', 'status': {'id': 202, 'value': None, 'last_updated_ts': 0}, 'config': {'id': 202, 'addr': '', 'name': None, 'obj_id': 45, 'idx': 0, 'meta': None}},
{'key': 'bthomesensor:203', 'status': {'id': 203, 'value': None, 'last_updated_ts': 0}, 'config': {'id': 203, 'addr': '', 'name': None, 'obj_id': 63, 'idx': 0, 'meta': None}},
{'key': 'bthomesensor:204', 'status': {'id': 204, 'value': 96, 'last_updated_ts': 1727518506}, 'config': {'id': 204, 'addr': '', 'name': None, 'obj_id': 1, 'idx': 0, 'meta': None}},
{'key': 'bthomesensor:205', 'status': {'id': 205, 'value': 20.82, 'last_updated_ts': 1727518506}, 'config': {'id': 205, 'addr': '', 'name': None, 'obj_id': 2, 'idx': 0, 'meta': None}},
{'key': 'bthomesensor:206', 'status': {'id': 206, 'value': 62.41, 'last_updated_ts': 1727518506}, 'config': {'id': 206, 'addr': '', 'name': None, 'obj_id': 3, 'idx': 0, 'meta': None}},
{'key': 'bthomesensor:207', 'status': {'id': 207, 'value': 2.869, 'last_updated_ts': 1727518378}, 'config': {'id': 207, 'addr': '', 'name': None, 'obj_id': 12, 'idx': 0, 'meta': None}},
{'key': 'bthomesensor:208', 'status': {'id': 208, 'value': True, 'last_updated_ts': 1727518378}, 'config': {'id': 208, 'addr': '', 'name': None, 'obj_id': 16, 'idx': 0, 'meta': None}}
],
'cfg_rev': 66, 'offset': 0, 'total': 14}
}
Only 11 components are returned, but there is totally 14 components.
The remaining can be retrived with another call to Shelly.GetComponents by setting the offset parameter.