tt_um_calc_shell.tlv

\m5_TLV_version 1d: tl-x.org
\m5
   use(m5-1.0)
   

   // #################################################################
   // #                                                               #
   // #  Starting-Point Code for MEST Course Tiny Tapeout Calculator  #
   // #                                                               #
   // #################################################################
   
   // ========
   // Settings
   // ========
   
   var(my_design, tt_um_example)   /// The name of your top-level TT module, to match your info.yml.
   var(debounce_inputs, 0)
          /// Legal values:
          ///   1: Provide synchronization and debouncing on all input signals.
          ///   0: Don't provide synchronization and debouncing.
          ///   m5_if_defined_as(MAKERCHIP, 1, 0, 1): Debounce unless in Makerchip.
   var(in_fpga, 1)   /// For Makerchip development: 1 to include the demo board in VIZ (in which case, logic will be under /fpga_pins/fpga).
   

   // ======================
   // Computed From Settings
   // ======================
   
   // If debouncing, a user's module is within a wrapper, so it has a different name.
   var(user_module_name, m5_if(m5_debounce_inputs, my_design, m5_my_design))
   var(debounce_cnt, m5_if_defined_as(MAKERCHIP, 1, 8'h03, 8'hff))


\SV
   // =================
   // Include Libraries
   // =================
   
   // Tiny Tapeout Lab.
   m4_include_lib(https:/['']/raw.githubusercontent.com/os-fpga/Virtual-FPGA-Lab/35e36bd144fddd75495d4cbc01c4fc50ac5bde6f/tlv_lib/tiny_tapeout_lib.tlv)
   // Calculator VIZ.
   m4_include_lib(https:/['']/raw.githubusercontent.com/efabless/chipcraft---mest-course/main/tlv_lib/calculator_shell_lib.tlv)



\TLV calc()
   
   // ==================
   // |                |
   // | YOUR CODE HERE |
   // |                |
   // ==================
   
   // Note that pipesignals assigned here can be found under /fpga_pins/fpga (if in_fpga is set to 1 above).
   
   

   m5+cal_viz(@1, m5_if(m5_in_fpga, /fpga, /top))
   
   // Connect Tiny Tapeout outputs. Note that uio_ outputs are not available in the Tiny-Tapeout-3-based FPGA boards.
   *uo_out = 8'b0;
   *uio_out = 8'b0;
   *uio_oe = 8'b0;



\SV

// ================================================
// A simple Makerchip Verilog test bench driving random stimulus.
// Modify the module contents to your needs.
// ================================================

module top(input logic clk, input logic reset, input logic [31:0] cyc_cnt, output logic passed, output logic failed);
   // Tiny tapeout I/O signals.
   logic [7:0] ui_in, uio_in, uo_out, uio_out, uio_oe;
   logic [31:0] r;  // a random value
   always @(posedge clk) r <= m5_if_defined_as(MAKERCHIP, 1, ['$urandom()'], ['0']);
   assign ui_in = r[7:0];
   assign uio_in = 8'b0;
   logic ena = 1'b0;
   logic rst_n = ! reset;
   
   // Instantiate the Tiny Tapeout module.
   m5_user_module_name tt(.*);
   
   assign passed = top.cyc_cnt > 80;
   assign failed = 1'b0;
endmodule


// Provide a wrapper module to debounce input signals if requested.
m5_if(m5_debounce_inputs, ['m5_tt_top(m5_my_design)'])
\SV



// =======================
// The Tiny Tapeout module
// =======================

module m5_user_module_name (
    input  wire [7:0] ui_in,    // Dedicated inputs - connected to the input switches
    output wire [7:0] uo_out,   // Dedicated outputs - connected to the 7 segment display
    input  wire [7:0] uio_in,   // IOs: Bidirectional Input path
    output wire [7:0] uio_out,  // IOs: Bidirectional Output path
    output wire [7:0] uio_oe,   // IOs: Bidirectional Enable path (active high: 0=input, 1=output)
    input  wire       ena,      // will go high when the design is enabled
    input  wire       clk,      // clock
    input  wire       rst_n     // reset_n - low to reset
);

   wire reset = ! rst_n;

   // List all potentially-unused inputs to prevent warnings
   wire _unused = &{ena, clk, rst_n, 1'b0};

\TLV tt_lab()
   // Connect Tiny Tapeout I/Os to Virtual FPGA Lab.
   m5+tt_connections()
   // Instantiate the Virtual FPGA Lab.
   m5+board(/top, /fpga, 7, $, , calc)
   // Label the switch inputs [0..7] (1..8 on the physical switch panel) (top-to-bottom).
   m5_if(m5_in_fpga, ['m5+tt_input_labels_viz(['"Value[0]", "Value[1]", "Value[2]", "Value[3]", "Op[0]", "Op[1]", "Op[2]", "="'])'])

\TLV
   /* verilator lint_off UNOPTFLAT */
   m5_if(m5_in_fpga, ['m5+tt_lab()'], ['m5+calc()'])

\SV
endmodule