change for bounding mmap range is likely not required anymore #81
Comments
anthraxx
pushed a commit
that referenced
this issue
Jun 1, 2024
[ Upstream commit fe879bb ] Current 'bpftool link' command does not show pids, e.g., $ tools/build/bpftool/bpftool link ... 4: tracing prog 23 prog_type lsm attach_type lsm_mac target_obj_id 1 target_btf_id 31320 Hack the following change to enable normal libbpf debug output, # --- a/tools/bpf/bpftool/pids.c # +++ b/tools/bpf/bpftool/pids.c # @@ -121,9 +121,9 @@ int build_obj_refs_table(struct hashmap **map, enum bpf_obj_type type) # /* we don't want output polluted with libbpf errors if bpf_iter is not # * supported # */ # - default_print = libbpf_set_print(libbpf_print_none); # + /* default_print = libbpf_set_print(libbpf_print_none); */ # err = pid_iter_bpf__load(skel); # - libbpf_set_print(default_print); # + /* libbpf_set_print(default_print); */ Rerun the above bpftool command: $ tools/build/bpftool/bpftool link libbpf: prog 'iter': BPF program load failed: Permission denied libbpf: prog 'iter': -- BEGIN PROG LOAD LOG -- 0: R1=ctx() R10=fp0 ; struct task_struct *task = ctx->task; @ pid_iter.bpf.c:69 0: (79) r6 = *(u64 *)(r1 +8) ; R1=ctx() R6_w=ptr_or_null_task_struct(id=1) ; struct file *file = ctx->file; @ pid_iter.bpf.c:68 ... ; struct bpf_link *link = (struct bpf_link *) file->private_data; @ pid_iter.bpf.c:103 80: (79) r3 = *(u64 *)(r8 +432) ; R3_w=scalar() R8=ptr_file() ; if (link->type == bpf_core_enum_value(enum bpf_link_type___local, @ pid_iter.bpf.c:105 81: (61) r1 = *(u32 *)(r3 +12) R3 invalid mem access 'scalar' processed 39 insns (limit 1000000) max_states_per_insn 0 total_states 3 peak_states 3 mark_read 2 -- END PROG LOAD LOG -- libbpf: prog 'iter': failed to load: -13 ... The 'file->private_data' returns a 'void' type and this caused subsequent 'link->type' (insn #81) failed in verification. To fix the issue, restore the previous BPF_CORE_READ so old kernels can also work. With this patch, the 'bpftool link' runs successfully with 'pids'. $ tools/build/bpftool/bpftool link ... 4: tracing prog 23 prog_type lsm attach_type lsm_mac target_obj_id 1 target_btf_id 31320 pids systemd(1) Fixes: 44ba7b3 ("bpftool: Use a local copy of BPF_LINK_TYPE_PERF_EVENT in pid_iter.bpf.c") Signed-off-by: Yonghong Song <[email protected]> Signed-off-by: Andrii Nakryiko <[email protected]> Tested-by: Quentin Monnet <[email protected]> Reviewed-by: Quentin Monnet <[email protected]> Link: https://lore.kernel.org/bpf/[email protected] Signed-off-by: Sasha Levin <[email protected]>
anthraxx
pushed a commit
that referenced
this issue
Jun 1, 2024
[ Upstream commit fe879bb ] Current 'bpftool link' command does not show pids, e.g., $ tools/build/bpftool/bpftool link ... 4: tracing prog 23 prog_type lsm attach_type lsm_mac target_obj_id 1 target_btf_id 31320 Hack the following change to enable normal libbpf debug output, # --- a/tools/bpf/bpftool/pids.c # +++ b/tools/bpf/bpftool/pids.c # @@ -121,9 +121,9 @@ int build_obj_refs_table(struct hashmap **map, enum bpf_obj_type type) # /* we don't want output polluted with libbpf errors if bpf_iter is not # * supported # */ # - default_print = libbpf_set_print(libbpf_print_none); # + /* default_print = libbpf_set_print(libbpf_print_none); */ # err = pid_iter_bpf__load(skel); # - libbpf_set_print(default_print); # + /* libbpf_set_print(default_print); */ Rerun the above bpftool command: $ tools/build/bpftool/bpftool link libbpf: prog 'iter': BPF program load failed: Permission denied libbpf: prog 'iter': -- BEGIN PROG LOAD LOG -- 0: R1=ctx() R10=fp0 ; struct task_struct *task = ctx->task; @ pid_iter.bpf.c:69 0: (79) r6 = *(u64 *)(r1 +8) ; R1=ctx() R6_w=ptr_or_null_task_struct(id=1) ; struct file *file = ctx->file; @ pid_iter.bpf.c:68 ... ; struct bpf_link *link = (struct bpf_link *) file->private_data; @ pid_iter.bpf.c:103 80: (79) r3 = *(u64 *)(r8 +432) ; R3_w=scalar() R8=ptr_file() ; if (link->type == bpf_core_enum_value(enum bpf_link_type___local, @ pid_iter.bpf.c:105 81: (61) r1 = *(u32 *)(r3 +12) R3 invalid mem access 'scalar' processed 39 insns (limit 1000000) max_states_per_insn 0 total_states 3 peak_states 3 mark_read 2 -- END PROG LOAD LOG -- libbpf: prog 'iter': failed to load: -13 ... The 'file->private_data' returns a 'void' type and this caused subsequent 'link->type' (insn #81) failed in verification. To fix the issue, restore the previous BPF_CORE_READ so old kernels can also work. With this patch, the 'bpftool link' runs successfully with 'pids'. $ tools/build/bpftool/bpftool link ... 4: tracing prog 23 prog_type lsm attach_type lsm_mac target_obj_id 1 target_btf_id 31320 pids systemd(1) Fixes: 44ba7b3 ("bpftool: Use a local copy of BPF_LINK_TYPE_PERF_EVENT in pid_iter.bpf.c") Signed-off-by: Yonghong Song <[email protected]> Signed-off-by: Andrii Nakryiko <[email protected]> Tested-by: Quentin Monnet <[email protected]> Reviewed-by: Quentin Monnet <[email protected]> Link: https://lore.kernel.org/bpf/[email protected] Signed-off-by: Sasha Levin <[email protected]>
anthraxx
pushed a commit
that referenced
this issue
Jun 14, 2024
[ Upstream commit fe879bb ] Current 'bpftool link' command does not show pids, e.g., $ tools/build/bpftool/bpftool link ... 4: tracing prog 23 prog_type lsm attach_type lsm_mac target_obj_id 1 target_btf_id 31320 Hack the following change to enable normal libbpf debug output, # --- a/tools/bpf/bpftool/pids.c # +++ b/tools/bpf/bpftool/pids.c # @@ -121,9 +121,9 @@ int build_obj_refs_table(struct hashmap **map, enum bpf_obj_type type) # /* we don't want output polluted with libbpf errors if bpf_iter is not # * supported # */ # - default_print = libbpf_set_print(libbpf_print_none); # + /* default_print = libbpf_set_print(libbpf_print_none); */ # err = pid_iter_bpf__load(skel); # - libbpf_set_print(default_print); # + /* libbpf_set_print(default_print); */ Rerun the above bpftool command: $ tools/build/bpftool/bpftool link libbpf: prog 'iter': BPF program load failed: Permission denied libbpf: prog 'iter': -- BEGIN PROG LOAD LOG -- 0: R1=ctx() R10=fp0 ; struct task_struct *task = ctx->task; @ pid_iter.bpf.c:69 0: (79) r6 = *(u64 *)(r1 +8) ; R1=ctx() R6_w=ptr_or_null_task_struct(id=1) ; struct file *file = ctx->file; @ pid_iter.bpf.c:68 ... ; struct bpf_link *link = (struct bpf_link *) file->private_data; @ pid_iter.bpf.c:103 80: (79) r3 = *(u64 *)(r8 +432) ; R3_w=scalar() R8=ptr_file() ; if (link->type == bpf_core_enum_value(enum bpf_link_type___local, @ pid_iter.bpf.c:105 81: (61) r1 = *(u32 *)(r3 +12) R3 invalid mem access 'scalar' processed 39 insns (limit 1000000) max_states_per_insn 0 total_states 3 peak_states 3 mark_read 2 -- END PROG LOAD LOG -- libbpf: prog 'iter': failed to load: -13 ... The 'file->private_data' returns a 'void' type and this caused subsequent 'link->type' (insn #81) failed in verification. To fix the issue, restore the previous BPF_CORE_READ so old kernels can also work. With this patch, the 'bpftool link' runs successfully with 'pids'. $ tools/build/bpftool/bpftool link ... 4: tracing prog 23 prog_type lsm attach_type lsm_mac target_obj_id 1 target_btf_id 31320 pids systemd(1) Fixes: 44ba7b3 ("bpftool: Use a local copy of BPF_LINK_TYPE_PERF_EVENT in pid_iter.bpf.c") Signed-off-by: Yonghong Song <[email protected]> Signed-off-by: Andrii Nakryiko <[email protected]> Tested-by: Quentin Monnet <[email protected]> Reviewed-by: Quentin Monnet <[email protected]> Link: https://lore.kernel.org/bpf/[email protected] Signed-off-by: Sasha Levin <[email protected]>
anthraxx
pushed a commit
that referenced
this issue
Jun 14, 2024
[ Upstream commit fe879bb ] Current 'bpftool link' command does not show pids, e.g., $ tools/build/bpftool/bpftool link ... 4: tracing prog 23 prog_type lsm attach_type lsm_mac target_obj_id 1 target_btf_id 31320 Hack the following change to enable normal libbpf debug output, # --- a/tools/bpf/bpftool/pids.c # +++ b/tools/bpf/bpftool/pids.c # @@ -121,9 +121,9 @@ int build_obj_refs_table(struct hashmap **map, enum bpf_obj_type type) # /* we don't want output polluted with libbpf errors if bpf_iter is not # * supported # */ # - default_print = libbpf_set_print(libbpf_print_none); # + /* default_print = libbpf_set_print(libbpf_print_none); */ # err = pid_iter_bpf__load(skel); # - libbpf_set_print(default_print); # + /* libbpf_set_print(default_print); */ Rerun the above bpftool command: $ tools/build/bpftool/bpftool link libbpf: prog 'iter': BPF program load failed: Permission denied libbpf: prog 'iter': -- BEGIN PROG LOAD LOG -- 0: R1=ctx() R10=fp0 ; struct task_struct *task = ctx->task; @ pid_iter.bpf.c:69 0: (79) r6 = *(u64 *)(r1 +8) ; R1=ctx() R6_w=ptr_or_null_task_struct(id=1) ; struct file *file = ctx->file; @ pid_iter.bpf.c:68 ... ; struct bpf_link *link = (struct bpf_link *) file->private_data; @ pid_iter.bpf.c:103 80: (79) r3 = *(u64 *)(r8 +432) ; R3_w=scalar() R8=ptr_file() ; if (link->type == bpf_core_enum_value(enum bpf_link_type___local, @ pid_iter.bpf.c:105 81: (61) r1 = *(u32 *)(r3 +12) R3 invalid mem access 'scalar' processed 39 insns (limit 1000000) max_states_per_insn 0 total_states 3 peak_states 3 mark_read 2 -- END PROG LOAD LOG -- libbpf: prog 'iter': failed to load: -13 ... The 'file->private_data' returns a 'void' type and this caused subsequent 'link->type' (insn #81) failed in verification. To fix the issue, restore the previous BPF_CORE_READ so old kernels can also work. With this patch, the 'bpftool link' runs successfully with 'pids'. $ tools/build/bpftool/bpftool link ... 4: tracing prog 23 prog_type lsm attach_type lsm_mac target_obj_id 1 target_btf_id 31320 pids systemd(1) Fixes: 44ba7b3 ("bpftool: Use a local copy of BPF_LINK_TYPE_PERF_EVENT in pid_iter.bpf.c") Signed-off-by: Yonghong Song <[email protected]> Signed-off-by: Andrii Nakryiko <[email protected]> Tested-by: Quentin Monnet <[email protected]> Reviewed-by: Quentin Monnet <[email protected]> Link: https://lore.kernel.org/bpf/[email protected] Signed-off-by: Sasha Levin <[email protected]>
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
6cf94a9
No longer seems required to prevent randomization from breaking by forcing exhausting the address space and then targeting a known address based on the lower bound. More testing / research required. I don't have time to spare for x86_64 though. I think it's fairly likely that stack gap changes are responsible for making it no longer required. It would be good to figure out what's happening via /proc/self/maps.
The text was updated successfully, but these errors were encountered: