forked from GrapheneOS/linux-hardened
-
Notifications
You must be signed in to change notification settings - Fork 56
New issue
Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.
By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.
Already on GitHub? Sign in to your account
Backporting security features to LTS kernels #30
Labels
question
Further information is requested
Comments
anthraxx
pushed a commit
that referenced
this issue
Jul 1, 2020
commit b7e3deb upstream. When working with very large nodes, poisoning the struct pages (for which there will be very many) can take a very long time. If the system is using voluntary preemptions, the software watchdog will not be able to detect forward progress. This patch addresses this issue by offering to give up time like __remove_pages() does. This behavior was introduced in v5.6 with: commit d33695b ("mm/memory_hotplug: poison memmap in remove_pfn_range_from_zone()") Alternately, init_page_poison could do this cond_resched(), but it seems to me that the caller of init_page_poison() is what actually knows whether or not it should relax its own priority. Based on Dan's notes, I think this is perfectly safe: commit f931ab4 ("mm: fix devm_memremap_pages crash, use mem_hotplug_{begin, done}") Aside from fixing the lockup, it is also a friendlier thing to do on lower core systems that might wipe out large chunks of hotplug memory (probably not a very common case). Fixes this kind of splat: watchdog: BUG: soft lockup - CPU#46 stuck for 22s! [daxctl:9922] irq event stamp: 138450 hardirqs last enabled at (138449): [<ffffffffa1001f26>] trace_hardirqs_on_thunk+0x1a/0x1c hardirqs last disabled at (138450): [<ffffffffa1001f42>] trace_hardirqs_off_thunk+0x1a/0x1c softirqs last enabled at (138448): [<ffffffffa1e00347>] __do_softirq+0x347/0x456 softirqs last disabled at (138443): [<ffffffffa10c416d>] irq_exit+0x7d/0xb0 CPU: 46 PID: 9922 Comm: daxctl Not tainted 5.7.0-BEN-14238-g373c6049b336 #30 Hardware name: Intel Corporation PURLEY/PURLEY, BIOS PLYXCRB1.86B.0578.D07.1902280810 02/28/2019 RIP: 0010:memset_erms+0x9/0x10 Code: c1 e9 03 40 0f b6 f6 48 b8 01 01 01 01 01 01 01 01 48 0f af c6 f3 48 ab 89 d1 f3 aa 4c 89 c8 c3 90 49 89 f9 40 88 f0 48 89 d1 <f3> aa 4c 89 c8 c3 90 49 89 fa 40 0f b6 ce 48 b8 01 01 01 01 01 01 Call Trace: remove_pfn_range_from_zone+0x3a/0x380 memunmap_pages+0x17f/0x280 release_nodes+0x22a/0x260 __device_release_driver+0x172/0x220 device_driver_detach+0x3e/0xa0 unbind_store+0x113/0x130 kernfs_fop_write+0xdc/0x1c0 vfs_write+0xde/0x1d0 ksys_write+0x58/0xd0 do_syscall_64+0x5a/0x120 entry_SYSCALL_64_after_hwframe+0x49/0xb3 Built 2 zonelists, mobility grouping on. Total pages: 49050381 Policy zone: Normal Built 3 zonelists, mobility grouping on. Total pages: 49312525 Policy zone: Normal David said: "It really only is an issue for devmem. Ordinary hotplugged system memory is not affected (onlined/offlined in memory block granularity)." Link: http://lkml.kernel.org/r/[email protected] Fixes: commit d33695b ("mm/memory_hotplug: poison memmap in remove_pfn_range_from_zone()") Signed-off-by: Ben Widawsky <[email protected]> Reported-by: "Scargall, Steve" <[email protected]> Reported-by: Ben Widawsky <[email protected]> Acked-by: David Hildenbrand <[email protected]> Cc: Dan Williams <[email protected]> Cc: Vishal Verma <[email protected]> Cc: <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
anthraxx
pushed a commit
that referenced
this issue
Aug 12, 2020
[ Upstream commit 83f3522 ] fib_trie_unmerge() is called with RTNL held, but not from an RCU read-side critical section. This leads to the following warning [1] when the FIB alias list in a leaf is traversed with hlist_for_each_entry_rcu(). Since the function is always called with RTNL held and since modification of the list is protected by RTNL, simply use hlist_for_each_entry() and silence the warning. [1] WARNING: suspicious RCU usage 5.8.0-rc4-custom-01520-gc1f937f3f83b #30 Not tainted ----------------------------- net/ipv4/fib_trie.c:1867 RCU-list traversed in non-reader section!! other info that might help us debug this: rcu_scheduler_active = 2, debug_locks = 1 1 lock held by ip/164: #0: ffffffff85a27850 (rtnl_mutex){+.+.}-{3:3}, at: rtnetlink_rcv_msg+0x49a/0xbd0 stack backtrace: CPU: 0 PID: 164 Comm: ip Not tainted 5.8.0-rc4-custom-01520-gc1f937f3f83b #30 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.13.0-2.fc32 04/01/2014 Call Trace: dump_stack+0x100/0x184 lockdep_rcu_suspicious+0x153/0x15d fib_trie_unmerge+0x608/0xdb0 fib_unmerge+0x44/0x360 fib4_rule_configure+0xc8/0xad0 fib_nl_newrule+0x37a/0x1dd0 rtnetlink_rcv_msg+0x4f7/0xbd0 netlink_rcv_skb+0x17a/0x480 rtnetlink_rcv+0x22/0x30 netlink_unicast+0x5ae/0x890 netlink_sendmsg+0x98a/0xf40 ____sys_sendmsg+0x879/0xa00 ___sys_sendmsg+0x122/0x190 __sys_sendmsg+0x103/0x1d0 __x64_sys_sendmsg+0x7d/0xb0 do_syscall_64+0x54/0xa0 entry_SYSCALL_64_after_hwframe+0x44/0xa9 RIP: 0033:0x7fc80a234e97 Code: Bad RIP value. RSP: 002b:00007ffef8b66798 EFLAGS: 00000246 ORIG_RAX: 000000000000002e RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007fc80a234e97 RDX: 0000000000000000 RSI: 00007ffef8b66800 RDI: 0000000000000003 RBP: 000000005f141b1c R08: 0000000000000001 R09: 0000000000000000 R10: 00007fc80a2a8ac0 R11: 0000000000000246 R12: 0000000000000001 R13: 0000000000000000 R14: 00007ffef8b67008 R15: 0000556fccb10020 Fixes: 0ddcf43 ("ipv4: FIB Local/MAIN table collapse") Signed-off-by: Ido Schimmel <[email protected]> Reviewed-by: Jiri Pirko <[email protected]> Signed-off-by: David S. Miller <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
anthraxx
pushed a commit
that referenced
this issue
Aug 12, 2020
[ Upstream commit 83f3522 ] fib_trie_unmerge() is called with RTNL held, but not from an RCU read-side critical section. This leads to the following warning [1] when the FIB alias list in a leaf is traversed with hlist_for_each_entry_rcu(). Since the function is always called with RTNL held and since modification of the list is protected by RTNL, simply use hlist_for_each_entry() and silence the warning. [1] WARNING: suspicious RCU usage 5.8.0-rc4-custom-01520-gc1f937f3f83b #30 Not tainted ----------------------------- net/ipv4/fib_trie.c:1867 RCU-list traversed in non-reader section!! other info that might help us debug this: rcu_scheduler_active = 2, debug_locks = 1 1 lock held by ip/164: #0: ffffffff85a27850 (rtnl_mutex){+.+.}-{3:3}, at: rtnetlink_rcv_msg+0x49a/0xbd0 stack backtrace: CPU: 0 PID: 164 Comm: ip Not tainted 5.8.0-rc4-custom-01520-gc1f937f3f83b #30 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.13.0-2.fc32 04/01/2014 Call Trace: dump_stack+0x100/0x184 lockdep_rcu_suspicious+0x153/0x15d fib_trie_unmerge+0x608/0xdb0 fib_unmerge+0x44/0x360 fib4_rule_configure+0xc8/0xad0 fib_nl_newrule+0x37a/0x1dd0 rtnetlink_rcv_msg+0x4f7/0xbd0 netlink_rcv_skb+0x17a/0x480 rtnetlink_rcv+0x22/0x30 netlink_unicast+0x5ae/0x890 netlink_sendmsg+0x98a/0xf40 ____sys_sendmsg+0x879/0xa00 ___sys_sendmsg+0x122/0x190 __sys_sendmsg+0x103/0x1d0 __x64_sys_sendmsg+0x7d/0xb0 do_syscall_64+0x54/0xa0 entry_SYSCALL_64_after_hwframe+0x44/0xa9 RIP: 0033:0x7fc80a234e97 Code: Bad RIP value. RSP: 002b:00007ffef8b66798 EFLAGS: 00000246 ORIG_RAX: 000000000000002e RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007fc80a234e97 RDX: 0000000000000000 RSI: 00007ffef8b66800 RDI: 0000000000000003 RBP: 000000005f141b1c R08: 0000000000000001 R09: 0000000000000000 R10: 00007fc80a2a8ac0 R11: 0000000000000246 R12: 0000000000000001 R13: 0000000000000000 R14: 00007ffef8b67008 R15: 0000556fccb10020 Fixes: 0ddcf43 ("ipv4: FIB Local/MAIN table collapse") Signed-off-by: Ido Schimmel <[email protected]> Reviewed-by: Jiri Pirko <[email protected]> Signed-off-by: David S. Miller <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
anthraxx
pushed a commit
that referenced
this issue
Aug 12, 2020
[ Upstream commit 83f3522 ] fib_trie_unmerge() is called with RTNL held, but not from an RCU read-side critical section. This leads to the following warning [1] when the FIB alias list in a leaf is traversed with hlist_for_each_entry_rcu(). Since the function is always called with RTNL held and since modification of the list is protected by RTNL, simply use hlist_for_each_entry() and silence the warning. [1] WARNING: suspicious RCU usage 5.8.0-rc4-custom-01520-gc1f937f3f83b #30 Not tainted ----------------------------- net/ipv4/fib_trie.c:1867 RCU-list traversed in non-reader section!! other info that might help us debug this: rcu_scheduler_active = 2, debug_locks = 1 1 lock held by ip/164: #0: ffffffff85a27850 (rtnl_mutex){+.+.}-{3:3}, at: rtnetlink_rcv_msg+0x49a/0xbd0 stack backtrace: CPU: 0 PID: 164 Comm: ip Not tainted 5.8.0-rc4-custom-01520-gc1f937f3f83b #30 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.13.0-2.fc32 04/01/2014 Call Trace: dump_stack+0x100/0x184 lockdep_rcu_suspicious+0x153/0x15d fib_trie_unmerge+0x608/0xdb0 fib_unmerge+0x44/0x360 fib4_rule_configure+0xc8/0xad0 fib_nl_newrule+0x37a/0x1dd0 rtnetlink_rcv_msg+0x4f7/0xbd0 netlink_rcv_skb+0x17a/0x480 rtnetlink_rcv+0x22/0x30 netlink_unicast+0x5ae/0x890 netlink_sendmsg+0x98a/0xf40 ____sys_sendmsg+0x879/0xa00 ___sys_sendmsg+0x122/0x190 __sys_sendmsg+0x103/0x1d0 __x64_sys_sendmsg+0x7d/0xb0 do_syscall_64+0x54/0xa0 entry_SYSCALL_64_after_hwframe+0x44/0xa9 RIP: 0033:0x7fc80a234e97 Code: Bad RIP value. RSP: 002b:00007ffef8b66798 EFLAGS: 00000246 ORIG_RAX: 000000000000002e RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007fc80a234e97 RDX: 0000000000000000 RSI: 00007ffef8b66800 RDI: 0000000000000003 RBP: 000000005f141b1c R08: 0000000000000001 R09: 0000000000000000 R10: 00007fc80a2a8ac0 R11: 0000000000000246 R12: 0000000000000001 R13: 0000000000000000 R14: 00007ffef8b67008 R15: 0000556fccb10020 Fixes: 0ddcf43 ("ipv4: FIB Local/MAIN table collapse") Signed-off-by: Ido Schimmel <[email protected]> Reviewed-by: Jiri Pirko <[email protected]> Signed-off-by: David S. Miller <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
anthraxx
pushed a commit
that referenced
this issue
Aug 24, 2020
[ Upstream commit 83f3522 ] fib_trie_unmerge() is called with RTNL held, but not from an RCU read-side critical section. This leads to the following warning [1] when the FIB alias list in a leaf is traversed with hlist_for_each_entry_rcu(). Since the function is always called with RTNL held and since modification of the list is protected by RTNL, simply use hlist_for_each_entry() and silence the warning. [1] WARNING: suspicious RCU usage 5.8.0-rc4-custom-01520-gc1f937f3f83b #30 Not tainted ----------------------------- net/ipv4/fib_trie.c:1867 RCU-list traversed in non-reader section!! other info that might help us debug this: rcu_scheduler_active = 2, debug_locks = 1 1 lock held by ip/164: #0: ffffffff85a27850 (rtnl_mutex){+.+.}-{3:3}, at: rtnetlink_rcv_msg+0x49a/0xbd0 stack backtrace: CPU: 0 PID: 164 Comm: ip Not tainted 5.8.0-rc4-custom-01520-gc1f937f3f83b #30 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.13.0-2.fc32 04/01/2014 Call Trace: dump_stack+0x100/0x184 lockdep_rcu_suspicious+0x153/0x15d fib_trie_unmerge+0x608/0xdb0 fib_unmerge+0x44/0x360 fib4_rule_configure+0xc8/0xad0 fib_nl_newrule+0x37a/0x1dd0 rtnetlink_rcv_msg+0x4f7/0xbd0 netlink_rcv_skb+0x17a/0x480 rtnetlink_rcv+0x22/0x30 netlink_unicast+0x5ae/0x890 netlink_sendmsg+0x98a/0xf40 ____sys_sendmsg+0x879/0xa00 ___sys_sendmsg+0x122/0x190 __sys_sendmsg+0x103/0x1d0 __x64_sys_sendmsg+0x7d/0xb0 do_syscall_64+0x54/0xa0 entry_SYSCALL_64_after_hwframe+0x44/0xa9 RIP: 0033:0x7fc80a234e97 Code: Bad RIP value. RSP: 002b:00007ffef8b66798 EFLAGS: 00000246 ORIG_RAX: 000000000000002e RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007fc80a234e97 RDX: 0000000000000000 RSI: 00007ffef8b66800 RDI: 0000000000000003 RBP: 000000005f141b1c R08: 0000000000000001 R09: 0000000000000000 R10: 00007fc80a2a8ac0 R11: 0000000000000246 R12: 0000000000000001 R13: 0000000000000000 R14: 00007ffef8b67008 R15: 0000556fccb10020 Fixes: 0ddcf43 ("ipv4: FIB Local/MAIN table collapse") Signed-off-by: Ido Schimmel <[email protected]> Reviewed-by: Jiri Pirko <[email protected]> Signed-off-by: David S. Miller <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
anthraxx
pushed a commit
that referenced
this issue
Oct 8, 2020
[ Upstream commit 96298f6 ] According to Core Spec Version 5.2 | Vol 3, Part A 6.1.5, the incoming L2CAP_ConfigReq should be handled during OPEN state. The section below shows the btmon trace when running L2CAP/COS/CFD/BV-12-C before and after this change. === Before === ... > ACL Data RX: Handle 256 flags 0x02 dlen 12 #22 L2CAP: Connection Request (0x02) ident 2 len 4 PSM: 1 (0x0001) Source CID: 65 < ACL Data TX: Handle 256 flags 0x00 dlen 16 #23 L2CAP: Connection Response (0x03) ident 2 len 8 Destination CID: 64 Source CID: 65 Result: Connection successful (0x0000) Status: No further information available (0x0000) < ACL Data TX: Handle 256 flags 0x00 dlen 12 #24 L2CAP: Configure Request (0x04) ident 2 len 4 Destination CID: 65 Flags: 0x0000 > HCI Event: Number of Completed Packets (0x13) plen 5 #25 Num handles: 1 Handle: 256 Count: 1 > HCI Event: Number of Completed Packets (0x13) plen 5 #26 Num handles: 1 Handle: 256 Count: 1 > ACL Data RX: Handle 256 flags 0x02 dlen 16 #27 L2CAP: Configure Request (0x04) ident 3 len 8 Destination CID: 64 Flags: 0x0000 Option: Unknown (0x10) [hint] 01 00 .. < ACL Data TX: Handle 256 flags 0x00 dlen 18 #28 L2CAP: Configure Response (0x05) ident 3 len 10 Source CID: 65 Flags: 0x0000 Result: Success (0x0000) Option: Maximum Transmission Unit (0x01) [mandatory] MTU: 672 > HCI Event: Number of Completed Packets (0x13) plen 5 #29 Num handles: 1 Handle: 256 Count: 1 > ACL Data RX: Handle 256 flags 0x02 dlen 14 #30 L2CAP: Configure Response (0x05) ident 2 len 6 Source CID: 64 Flags: 0x0000 Result: Success (0x0000) > ACL Data RX: Handle 256 flags 0x02 dlen 20 #31 L2CAP: Configure Request (0x04) ident 3 len 12 Destination CID: 64 Flags: 0x0000 Option: Unknown (0x10) [hint] 01 00 91 02 11 11 ...... < ACL Data TX: Handle 256 flags 0x00 dlen 14 #32 L2CAP: Command Reject (0x01) ident 3 len 6 Reason: Invalid CID in request (0x0002) Destination CID: 64 Source CID: 65 > HCI Event: Number of Completed Packets (0x13) plen 5 #33 Num handles: 1 Handle: 256 Count: 1 ... === After === ... > ACL Data RX: Handle 256 flags 0x02 dlen 12 #22 L2CAP: Connection Request (0x02) ident 2 len 4 PSM: 1 (0x0001) Source CID: 65 < ACL Data TX: Handle 256 flags 0x00 dlen 16 #23 L2CAP: Connection Response (0x03) ident 2 len 8 Destination CID: 64 Source CID: 65 Result: Connection successful (0x0000) Status: No further information available (0x0000) < ACL Data TX: Handle 256 flags 0x00 dlen 12 #24 L2CAP: Configure Request (0x04) ident 2 len 4 Destination CID: 65 Flags: 0x0000 > HCI Event: Number of Completed Packets (0x13) plen 5 #25 Num handles: 1 Handle: 256 Count: 1 > HCI Event: Number of Completed Packets (0x13) plen 5 #26 Num handles: 1 Handle: 256 Count: 1 > ACL Data RX: Handle 256 flags 0x02 dlen 16 #27 L2CAP: Configure Request (0x04) ident 3 len 8 Destination CID: 64 Flags: 0x0000 Option: Unknown (0x10) [hint] 01 00 .. < ACL Data TX: Handle 256 flags 0x00 dlen 18 #28 L2CAP: Configure Response (0x05) ident 3 len 10 Source CID: 65 Flags: 0x0000 Result: Success (0x0000) Option: Maximum Transmission Unit (0x01) [mandatory] MTU: 672 > HCI Event: Number of Completed Packets (0x13) plen 5 #29 Num handles: 1 Handle: 256 Count: 1 > ACL Data RX: Handle 256 flags 0x02 dlen 14 #30 L2CAP: Configure Response (0x05) ident 2 len 6 Source CID: 64 Flags: 0x0000 Result: Success (0x0000) > ACL Data RX: Handle 256 flags 0x02 dlen 20 #31 L2CAP: Configure Request (0x04) ident 3 len 12 Destination CID: 64 Flags: 0x0000 Option: Unknown (0x10) [hint] 01 00 91 02 11 11 ..... < ACL Data TX: Handle 256 flags 0x00 dlen 18 #32 L2CAP: Configure Response (0x05) ident 3 len 10 Source CID: 65 Flags: 0x0000 Result: Success (0x0000) Option: Maximum Transmission Unit (0x01) [mandatory] MTU: 672 < ACL Data TX: Handle 256 flags 0x00 dlen 12 #33 L2CAP: Configure Request (0x04) ident 3 len 4 Destination CID: 65 Flags: 0x0000 > HCI Event: Number of Completed Packets (0x13) plen 5 #34 Num handles: 1 Handle: 256 Count: 1 > HCI Event: Number of Completed Packets (0x13) plen 5 #35 Num handles: 1 Handle: 256 Count: 1 ... Signed-off-by: Howard Chung <[email protected]> Signed-off-by: Marcel Holtmann <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
anthraxx
pushed a commit
that referenced
this issue
Oct 8, 2020
[ Upstream commit 96298f6 ] According to Core Spec Version 5.2 | Vol 3, Part A 6.1.5, the incoming L2CAP_ConfigReq should be handled during OPEN state. The section below shows the btmon trace when running L2CAP/COS/CFD/BV-12-C before and after this change. === Before === ... > ACL Data RX: Handle 256 flags 0x02 dlen 12 #22 L2CAP: Connection Request (0x02) ident 2 len 4 PSM: 1 (0x0001) Source CID: 65 < ACL Data TX: Handle 256 flags 0x00 dlen 16 #23 L2CAP: Connection Response (0x03) ident 2 len 8 Destination CID: 64 Source CID: 65 Result: Connection successful (0x0000) Status: No further information available (0x0000) < ACL Data TX: Handle 256 flags 0x00 dlen 12 #24 L2CAP: Configure Request (0x04) ident 2 len 4 Destination CID: 65 Flags: 0x0000 > HCI Event: Number of Completed Packets (0x13) plen 5 #25 Num handles: 1 Handle: 256 Count: 1 > HCI Event: Number of Completed Packets (0x13) plen 5 #26 Num handles: 1 Handle: 256 Count: 1 > ACL Data RX: Handle 256 flags 0x02 dlen 16 #27 L2CAP: Configure Request (0x04) ident 3 len 8 Destination CID: 64 Flags: 0x0000 Option: Unknown (0x10) [hint] 01 00 .. < ACL Data TX: Handle 256 flags 0x00 dlen 18 #28 L2CAP: Configure Response (0x05) ident 3 len 10 Source CID: 65 Flags: 0x0000 Result: Success (0x0000) Option: Maximum Transmission Unit (0x01) [mandatory] MTU: 672 > HCI Event: Number of Completed Packets (0x13) plen 5 #29 Num handles: 1 Handle: 256 Count: 1 > ACL Data RX: Handle 256 flags 0x02 dlen 14 #30 L2CAP: Configure Response (0x05) ident 2 len 6 Source CID: 64 Flags: 0x0000 Result: Success (0x0000) > ACL Data RX: Handle 256 flags 0x02 dlen 20 #31 L2CAP: Configure Request (0x04) ident 3 len 12 Destination CID: 64 Flags: 0x0000 Option: Unknown (0x10) [hint] 01 00 91 02 11 11 ...... < ACL Data TX: Handle 256 flags 0x00 dlen 14 #32 L2CAP: Command Reject (0x01) ident 3 len 6 Reason: Invalid CID in request (0x0002) Destination CID: 64 Source CID: 65 > HCI Event: Number of Completed Packets (0x13) plen 5 #33 Num handles: 1 Handle: 256 Count: 1 ... === After === ... > ACL Data RX: Handle 256 flags 0x02 dlen 12 #22 L2CAP: Connection Request (0x02) ident 2 len 4 PSM: 1 (0x0001) Source CID: 65 < ACL Data TX: Handle 256 flags 0x00 dlen 16 #23 L2CAP: Connection Response (0x03) ident 2 len 8 Destination CID: 64 Source CID: 65 Result: Connection successful (0x0000) Status: No further information available (0x0000) < ACL Data TX: Handle 256 flags 0x00 dlen 12 #24 L2CAP: Configure Request (0x04) ident 2 len 4 Destination CID: 65 Flags: 0x0000 > HCI Event: Number of Completed Packets (0x13) plen 5 #25 Num handles: 1 Handle: 256 Count: 1 > HCI Event: Number of Completed Packets (0x13) plen 5 #26 Num handles: 1 Handle: 256 Count: 1 > ACL Data RX: Handle 256 flags 0x02 dlen 16 #27 L2CAP: Configure Request (0x04) ident 3 len 8 Destination CID: 64 Flags: 0x0000 Option: Unknown (0x10) [hint] 01 00 .. < ACL Data TX: Handle 256 flags 0x00 dlen 18 #28 L2CAP: Configure Response (0x05) ident 3 len 10 Source CID: 65 Flags: 0x0000 Result: Success (0x0000) Option: Maximum Transmission Unit (0x01) [mandatory] MTU: 672 > HCI Event: Number of Completed Packets (0x13) plen 5 #29 Num handles: 1 Handle: 256 Count: 1 > ACL Data RX: Handle 256 flags 0x02 dlen 14 #30 L2CAP: Configure Response (0x05) ident 2 len 6 Source CID: 64 Flags: 0x0000 Result: Success (0x0000) > ACL Data RX: Handle 256 flags 0x02 dlen 20 #31 L2CAP: Configure Request (0x04) ident 3 len 12 Destination CID: 64 Flags: 0x0000 Option: Unknown (0x10) [hint] 01 00 91 02 11 11 ..... < ACL Data TX: Handle 256 flags 0x00 dlen 18 #32 L2CAP: Configure Response (0x05) ident 3 len 10 Source CID: 65 Flags: 0x0000 Result: Success (0x0000) Option: Maximum Transmission Unit (0x01) [mandatory] MTU: 672 < ACL Data TX: Handle 256 flags 0x00 dlen 12 #33 L2CAP: Configure Request (0x04) ident 3 len 4 Destination CID: 65 Flags: 0x0000 > HCI Event: Number of Completed Packets (0x13) plen 5 #34 Num handles: 1 Handle: 256 Count: 1 > HCI Event: Number of Completed Packets (0x13) plen 5 #35 Num handles: 1 Handle: 256 Count: 1 ... Signed-off-by: Howard Chung <[email protected]> Signed-off-by: Marcel Holtmann <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
anthraxx
pushed a commit
that referenced
this issue
Oct 8, 2020
[ Upstream commit 96298f6 ] According to Core Spec Version 5.2 | Vol 3, Part A 6.1.5, the incoming L2CAP_ConfigReq should be handled during OPEN state. The section below shows the btmon trace when running L2CAP/COS/CFD/BV-12-C before and after this change. === Before === ... > ACL Data RX: Handle 256 flags 0x02 dlen 12 #22 L2CAP: Connection Request (0x02) ident 2 len 4 PSM: 1 (0x0001) Source CID: 65 < ACL Data TX: Handle 256 flags 0x00 dlen 16 #23 L2CAP: Connection Response (0x03) ident 2 len 8 Destination CID: 64 Source CID: 65 Result: Connection successful (0x0000) Status: No further information available (0x0000) < ACL Data TX: Handle 256 flags 0x00 dlen 12 #24 L2CAP: Configure Request (0x04) ident 2 len 4 Destination CID: 65 Flags: 0x0000 > HCI Event: Number of Completed Packets (0x13) plen 5 #25 Num handles: 1 Handle: 256 Count: 1 > HCI Event: Number of Completed Packets (0x13) plen 5 #26 Num handles: 1 Handle: 256 Count: 1 > ACL Data RX: Handle 256 flags 0x02 dlen 16 #27 L2CAP: Configure Request (0x04) ident 3 len 8 Destination CID: 64 Flags: 0x0000 Option: Unknown (0x10) [hint] 01 00 .. < ACL Data TX: Handle 256 flags 0x00 dlen 18 #28 L2CAP: Configure Response (0x05) ident 3 len 10 Source CID: 65 Flags: 0x0000 Result: Success (0x0000) Option: Maximum Transmission Unit (0x01) [mandatory] MTU: 672 > HCI Event: Number of Completed Packets (0x13) plen 5 #29 Num handles: 1 Handle: 256 Count: 1 > ACL Data RX: Handle 256 flags 0x02 dlen 14 #30 L2CAP: Configure Response (0x05) ident 2 len 6 Source CID: 64 Flags: 0x0000 Result: Success (0x0000) > ACL Data RX: Handle 256 flags 0x02 dlen 20 #31 L2CAP: Configure Request (0x04) ident 3 len 12 Destination CID: 64 Flags: 0x0000 Option: Unknown (0x10) [hint] 01 00 91 02 11 11 ...... < ACL Data TX: Handle 256 flags 0x00 dlen 14 #32 L2CAP: Command Reject (0x01) ident 3 len 6 Reason: Invalid CID in request (0x0002) Destination CID: 64 Source CID: 65 > HCI Event: Number of Completed Packets (0x13) plen 5 #33 Num handles: 1 Handle: 256 Count: 1 ... === After === ... > ACL Data RX: Handle 256 flags 0x02 dlen 12 #22 L2CAP: Connection Request (0x02) ident 2 len 4 PSM: 1 (0x0001) Source CID: 65 < ACL Data TX: Handle 256 flags 0x00 dlen 16 #23 L2CAP: Connection Response (0x03) ident 2 len 8 Destination CID: 64 Source CID: 65 Result: Connection successful (0x0000) Status: No further information available (0x0000) < ACL Data TX: Handle 256 flags 0x00 dlen 12 #24 L2CAP: Configure Request (0x04) ident 2 len 4 Destination CID: 65 Flags: 0x0000 > HCI Event: Number of Completed Packets (0x13) plen 5 #25 Num handles: 1 Handle: 256 Count: 1 > HCI Event: Number of Completed Packets (0x13) plen 5 #26 Num handles: 1 Handle: 256 Count: 1 > ACL Data RX: Handle 256 flags 0x02 dlen 16 #27 L2CAP: Configure Request (0x04) ident 3 len 8 Destination CID: 64 Flags: 0x0000 Option: Unknown (0x10) [hint] 01 00 .. < ACL Data TX: Handle 256 flags 0x00 dlen 18 #28 L2CAP: Configure Response (0x05) ident 3 len 10 Source CID: 65 Flags: 0x0000 Result: Success (0x0000) Option: Maximum Transmission Unit (0x01) [mandatory] MTU: 672 > HCI Event: Number of Completed Packets (0x13) plen 5 #29 Num handles: 1 Handle: 256 Count: 1 > ACL Data RX: Handle 256 flags 0x02 dlen 14 #30 L2CAP: Configure Response (0x05) ident 2 len 6 Source CID: 64 Flags: 0x0000 Result: Success (0x0000) > ACL Data RX: Handle 256 flags 0x02 dlen 20 #31 L2CAP: Configure Request (0x04) ident 3 len 12 Destination CID: 64 Flags: 0x0000 Option: Unknown (0x10) [hint] 01 00 91 02 11 11 ..... < ACL Data TX: Handle 256 flags 0x00 dlen 18 #32 L2CAP: Configure Response (0x05) ident 3 len 10 Source CID: 65 Flags: 0x0000 Result: Success (0x0000) Option: Maximum Transmission Unit (0x01) [mandatory] MTU: 672 < ACL Data TX: Handle 256 flags 0x00 dlen 12 #33 L2CAP: Configure Request (0x04) ident 3 len 4 Destination CID: 65 Flags: 0x0000 > HCI Event: Number of Completed Packets (0x13) plen 5 #34 Num handles: 1 Handle: 256 Count: 1 > HCI Event: Number of Completed Packets (0x13) plen 5 #35 Num handles: 1 Handle: 256 Count: 1 ... Signed-off-by: Howard Chung <[email protected]> Signed-off-by: Marcel Holtmann <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
5.11 rc out and hardened still hasn't caught up to 5.10. What's the point of using a kernel patch / more secure configuration if it's left with security holes for so long and so often? 5.9 is EOL, and that's even worse, but it would still be vulnerable if it was "supported" upstream. We need to be on the latest kernel if we want the fixes. |
There is a 5.10 branch for quite a while, you are free to easily use it to create your patch set file and also give feedback. However stop hijacking arbitrary threads.
|
anthraxx
pushed a commit
that referenced
this issue
May 14, 2021
[ Upstream commit 0f20615 ] Fix BPF_CORE_READ_BITFIELD() macro used for reading CO-RE-relocatable bitfields. Missing breaks in a switch caused 8-byte reads always. This can confuse libbpf because it does strict checks that memory load size corresponds to the original size of the field, which in this case quite often would be wrong. After fixing that, we run into another problem, which quite subtle, so worth documenting here. The issue is in Clang optimization and CO-RE relocation interactions. Without that asm volatile construct (also known as barrier_var()), Clang will re-order BYTE_OFFSET and BYTE_SIZE relocations and will apply BYTE_OFFSET 4 times for each switch case arm. This will result in the same error from libbpf about mismatch of memory load size and original field size. I.e., if we were reading u32, we'd still have *(u8 *), *(u16 *), *(u32 *), and *(u64 *) memory loads, three of which will fail. Using barrier_var() forces Clang to apply BYTE_OFFSET relocation first (and once) to calculate p, after which value of p is used without relocation in each of switch case arms, doing appropiately-sized memory load. Here's the list of relevant relocations and pieces of generated BPF code before and after this patch for test_core_reloc_bitfields_direct selftests. BEFORE ===== #45: core_reloc: insn #160 --> [5] + 0:5: byte_sz --> struct core_reloc_bitfields.u32 #46: core_reloc: insn #167 --> [5] + 0:5: byte_off --> struct core_reloc_bitfields.u32 #47: core_reloc: insn #174 --> [5] + 0:5: byte_off --> struct core_reloc_bitfields.u32 #48: core_reloc: insn #178 --> [5] + 0:5: byte_off --> struct core_reloc_bitfields.u32 #49: core_reloc: insn #182 --> [5] + 0:5: byte_off --> struct core_reloc_bitfields.u32 157: 18 02 00 00 00 00 00 00 00 00 00 00 00 00 00 00 r2 = 0 ll 159: 7b 12 20 01 00 00 00 00 *(u64 *)(r2 + 288) = r1 160: b7 02 00 00 04 00 00 00 r2 = 4 ; BYTE_SIZE relocation here ^^^ 161: 66 02 07 00 03 00 00 00 if w2 s> 3 goto +7 <LBB0_63> 162: 16 02 0d 00 01 00 00 00 if w2 == 1 goto +13 <LBB0_65> 163: 16 02 01 00 02 00 00 00 if w2 == 2 goto +1 <LBB0_66> 164: 05 00 12 00 00 00 00 00 goto +18 <LBB0_69> 0000000000000528 <LBB0_66>: 165: 18 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 r1 = 0 ll 167: 69 11 08 00 00 00 00 00 r1 = *(u16 *)(r1 + 8) ; BYTE_OFFSET relo here w/ WRONG size ^^^^^^^^^^^^^^^^ 168: 05 00 0e 00 00 00 00 00 goto +14 <LBB0_69> 0000000000000548 <LBB0_63>: 169: 16 02 0a 00 04 00 00 00 if w2 == 4 goto +10 <LBB0_67> 170: 16 02 01 00 08 00 00 00 if w2 == 8 goto +1 <LBB0_68> 171: 05 00 0b 00 00 00 00 00 goto +11 <LBB0_69> 0000000000000560 <LBB0_68>: 172: 18 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 r1 = 0 ll 174: 79 11 08 00 00 00 00 00 r1 = *(u64 *)(r1 + 8) ; BYTE_OFFSET relo here w/ WRONG size ^^^^^^^^^^^^^^^^ 175: 05 00 07 00 00 00 00 00 goto +7 <LBB0_69> 0000000000000580 <LBB0_65>: 176: 18 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 r1 = 0 ll 178: 71 11 08 00 00 00 00 00 r1 = *(u8 *)(r1 + 8) ; BYTE_OFFSET relo here w/ WRONG size ^^^^^^^^^^^^^^^^ 179: 05 00 03 00 00 00 00 00 goto +3 <LBB0_69> 00000000000005a0 <LBB0_67>: 180: 18 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 r1 = 0 ll 182: 61 11 08 00 00 00 00 00 r1 = *(u32 *)(r1 + 8) ; BYTE_OFFSET relo here w/ RIGHT size ^^^^^^^^^^^^^^^^ 00000000000005b8 <LBB0_69>: 183: 67 01 00 00 20 00 00 00 r1 <<= 32 184: b7 02 00 00 00 00 00 00 r2 = 0 185: 16 02 02 00 00 00 00 00 if w2 == 0 goto +2 <LBB0_71> 186: c7 01 00 00 20 00 00 00 r1 s>>= 32 187: 05 00 01 00 00 00 00 00 goto +1 <LBB0_72> 00000000000005e0 <LBB0_71>: 188: 77 01 00 00 20 00 00 00 r1 >>= 32 AFTER ===== #30: core_reloc: insn #132 --> [5] + 0:5: byte_off --> struct core_reloc_bitfields.u32 #31: core_reloc: insn #134 --> [5] + 0:5: byte_sz --> struct core_reloc_bitfields.u32 129: 18 02 00 00 00 00 00 00 00 00 00 00 00 00 00 00 r2 = 0 ll 131: 7b 12 20 01 00 00 00 00 *(u64 *)(r2 + 288) = r1 132: b7 01 00 00 08 00 00 00 r1 = 8 ; BYTE_OFFSET relo here ^^^ ; no size check for non-memory dereferencing instructions 133: 0f 12 00 00 00 00 00 00 r2 += r1 134: b7 03 00 00 04 00 00 00 r3 = 4 ; BYTE_SIZE relocation here ^^^ 135: 66 03 05 00 03 00 00 00 if w3 s> 3 goto +5 <LBB0_63> 136: 16 03 09 00 01 00 00 00 if w3 == 1 goto +9 <LBB0_65> 137: 16 03 01 00 02 00 00 00 if w3 == 2 goto +1 <LBB0_66> 138: 05 00 0a 00 00 00 00 00 goto +10 <LBB0_69> 0000000000000458 <LBB0_66>: 139: 69 21 00 00 00 00 00 00 r1 = *(u16 *)(r2 + 0) ; NO CO-RE relocation here ^^^^^^^^^^^^^^^^ 140: 05 00 08 00 00 00 00 00 goto +8 <LBB0_69> 0000000000000468 <LBB0_63>: 141: 16 03 06 00 04 00 00 00 if w3 == 4 goto +6 <LBB0_67> 142: 16 03 01 00 08 00 00 00 if w3 == 8 goto +1 <LBB0_68> 143: 05 00 05 00 00 00 00 00 goto +5 <LBB0_69> 0000000000000480 <LBB0_68>: 144: 79 21 00 00 00 00 00 00 r1 = *(u64 *)(r2 + 0) ; NO CO-RE relocation here ^^^^^^^^^^^^^^^^ 145: 05 00 03 00 00 00 00 00 goto +3 <LBB0_69> 0000000000000490 <LBB0_65>: 146: 71 21 00 00 00 00 00 00 r1 = *(u8 *)(r2 + 0) ; NO CO-RE relocation here ^^^^^^^^^^^^^^^^ 147: 05 00 01 00 00 00 00 00 goto +1 <LBB0_69> 00000000000004a0 <LBB0_67>: 148: 61 21 00 00 00 00 00 00 r1 = *(u32 *)(r2 + 0) ; NO CO-RE relocation here ^^^^^^^^^^^^^^^^ 00000000000004a8 <LBB0_69>: 149: 67 01 00 00 20 00 00 00 r1 <<= 32 150: b7 02 00 00 00 00 00 00 r2 = 0 151: 16 02 02 00 00 00 00 00 if w2 == 0 goto +2 <LBB0_71> 152: c7 01 00 00 20 00 00 00 r1 s>>= 32 153: 05 00 01 00 00 00 00 00 goto +1 <LBB0_72> 00000000000004d0 <LBB0_71>: 154: 77 01 00 00 20 00 00 00 r1 >>= 323 Fixes: ee26dad ("libbpf: Add support for relocatable bitfields") Signed-off-by: Andrii Nakryiko <[email protected]> Signed-off-by: Alexei Starovoitov <[email protected]> Acked-by: Lorenz Bauer <[email protected]> Link: https://lore.kernel.org/bpf/[email protected] Signed-off-by: Sasha Levin <[email protected]>
anthraxx
pushed a commit
that referenced
this issue
May 14, 2021
[ Upstream commit 0f20615 ] Fix BPF_CORE_READ_BITFIELD() macro used for reading CO-RE-relocatable bitfields. Missing breaks in a switch caused 8-byte reads always. This can confuse libbpf because it does strict checks that memory load size corresponds to the original size of the field, which in this case quite often would be wrong. After fixing that, we run into another problem, which quite subtle, so worth documenting here. The issue is in Clang optimization and CO-RE relocation interactions. Without that asm volatile construct (also known as barrier_var()), Clang will re-order BYTE_OFFSET and BYTE_SIZE relocations and will apply BYTE_OFFSET 4 times for each switch case arm. This will result in the same error from libbpf about mismatch of memory load size and original field size. I.e., if we were reading u32, we'd still have *(u8 *), *(u16 *), *(u32 *), and *(u64 *) memory loads, three of which will fail. Using barrier_var() forces Clang to apply BYTE_OFFSET relocation first (and once) to calculate p, after which value of p is used without relocation in each of switch case arms, doing appropiately-sized memory load. Here's the list of relevant relocations and pieces of generated BPF code before and after this patch for test_core_reloc_bitfields_direct selftests. BEFORE ===== #45: core_reloc: insn #160 --> [5] + 0:5: byte_sz --> struct core_reloc_bitfields.u32 #46: core_reloc: insn #167 --> [5] + 0:5: byte_off --> struct core_reloc_bitfields.u32 #47: core_reloc: insn #174 --> [5] + 0:5: byte_off --> struct core_reloc_bitfields.u32 #48: core_reloc: insn #178 --> [5] + 0:5: byte_off --> struct core_reloc_bitfields.u32 #49: core_reloc: insn #182 --> [5] + 0:5: byte_off --> struct core_reloc_bitfields.u32 157: 18 02 00 00 00 00 00 00 00 00 00 00 00 00 00 00 r2 = 0 ll 159: 7b 12 20 01 00 00 00 00 *(u64 *)(r2 + 288) = r1 160: b7 02 00 00 04 00 00 00 r2 = 4 ; BYTE_SIZE relocation here ^^^ 161: 66 02 07 00 03 00 00 00 if w2 s> 3 goto +7 <LBB0_63> 162: 16 02 0d 00 01 00 00 00 if w2 == 1 goto +13 <LBB0_65> 163: 16 02 01 00 02 00 00 00 if w2 == 2 goto +1 <LBB0_66> 164: 05 00 12 00 00 00 00 00 goto +18 <LBB0_69> 0000000000000528 <LBB0_66>: 165: 18 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 r1 = 0 ll 167: 69 11 08 00 00 00 00 00 r1 = *(u16 *)(r1 + 8) ; BYTE_OFFSET relo here w/ WRONG size ^^^^^^^^^^^^^^^^ 168: 05 00 0e 00 00 00 00 00 goto +14 <LBB0_69> 0000000000000548 <LBB0_63>: 169: 16 02 0a 00 04 00 00 00 if w2 == 4 goto +10 <LBB0_67> 170: 16 02 01 00 08 00 00 00 if w2 == 8 goto +1 <LBB0_68> 171: 05 00 0b 00 00 00 00 00 goto +11 <LBB0_69> 0000000000000560 <LBB0_68>: 172: 18 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 r1 = 0 ll 174: 79 11 08 00 00 00 00 00 r1 = *(u64 *)(r1 + 8) ; BYTE_OFFSET relo here w/ WRONG size ^^^^^^^^^^^^^^^^ 175: 05 00 07 00 00 00 00 00 goto +7 <LBB0_69> 0000000000000580 <LBB0_65>: 176: 18 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 r1 = 0 ll 178: 71 11 08 00 00 00 00 00 r1 = *(u8 *)(r1 + 8) ; BYTE_OFFSET relo here w/ WRONG size ^^^^^^^^^^^^^^^^ 179: 05 00 03 00 00 00 00 00 goto +3 <LBB0_69> 00000000000005a0 <LBB0_67>: 180: 18 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 r1 = 0 ll 182: 61 11 08 00 00 00 00 00 r1 = *(u32 *)(r1 + 8) ; BYTE_OFFSET relo here w/ RIGHT size ^^^^^^^^^^^^^^^^ 00000000000005b8 <LBB0_69>: 183: 67 01 00 00 20 00 00 00 r1 <<= 32 184: b7 02 00 00 00 00 00 00 r2 = 0 185: 16 02 02 00 00 00 00 00 if w2 == 0 goto +2 <LBB0_71> 186: c7 01 00 00 20 00 00 00 r1 s>>= 32 187: 05 00 01 00 00 00 00 00 goto +1 <LBB0_72> 00000000000005e0 <LBB0_71>: 188: 77 01 00 00 20 00 00 00 r1 >>= 32 AFTER ===== #30: core_reloc: insn #132 --> [5] + 0:5: byte_off --> struct core_reloc_bitfields.u32 #31: core_reloc: insn #134 --> [5] + 0:5: byte_sz --> struct core_reloc_bitfields.u32 129: 18 02 00 00 00 00 00 00 00 00 00 00 00 00 00 00 r2 = 0 ll 131: 7b 12 20 01 00 00 00 00 *(u64 *)(r2 + 288) = r1 132: b7 01 00 00 08 00 00 00 r1 = 8 ; BYTE_OFFSET relo here ^^^ ; no size check for non-memory dereferencing instructions 133: 0f 12 00 00 00 00 00 00 r2 += r1 134: b7 03 00 00 04 00 00 00 r3 = 4 ; BYTE_SIZE relocation here ^^^ 135: 66 03 05 00 03 00 00 00 if w3 s> 3 goto +5 <LBB0_63> 136: 16 03 09 00 01 00 00 00 if w3 == 1 goto +9 <LBB0_65> 137: 16 03 01 00 02 00 00 00 if w3 == 2 goto +1 <LBB0_66> 138: 05 00 0a 00 00 00 00 00 goto +10 <LBB0_69> 0000000000000458 <LBB0_66>: 139: 69 21 00 00 00 00 00 00 r1 = *(u16 *)(r2 + 0) ; NO CO-RE relocation here ^^^^^^^^^^^^^^^^ 140: 05 00 08 00 00 00 00 00 goto +8 <LBB0_69> 0000000000000468 <LBB0_63>: 141: 16 03 06 00 04 00 00 00 if w3 == 4 goto +6 <LBB0_67> 142: 16 03 01 00 08 00 00 00 if w3 == 8 goto +1 <LBB0_68> 143: 05 00 05 00 00 00 00 00 goto +5 <LBB0_69> 0000000000000480 <LBB0_68>: 144: 79 21 00 00 00 00 00 00 r1 = *(u64 *)(r2 + 0) ; NO CO-RE relocation here ^^^^^^^^^^^^^^^^ 145: 05 00 03 00 00 00 00 00 goto +3 <LBB0_69> 0000000000000490 <LBB0_65>: 146: 71 21 00 00 00 00 00 00 r1 = *(u8 *)(r2 + 0) ; NO CO-RE relocation here ^^^^^^^^^^^^^^^^ 147: 05 00 01 00 00 00 00 00 goto +1 <LBB0_69> 00000000000004a0 <LBB0_67>: 148: 61 21 00 00 00 00 00 00 r1 = *(u32 *)(r2 + 0) ; NO CO-RE relocation here ^^^^^^^^^^^^^^^^ 00000000000004a8 <LBB0_69>: 149: 67 01 00 00 20 00 00 00 r1 <<= 32 150: b7 02 00 00 00 00 00 00 r2 = 0 151: 16 02 02 00 00 00 00 00 if w2 == 0 goto +2 <LBB0_71> 152: c7 01 00 00 20 00 00 00 r1 s>>= 32 153: 05 00 01 00 00 00 00 00 goto +1 <LBB0_72> 00000000000004d0 <LBB0_71>: 154: 77 01 00 00 20 00 00 00 r1 >>= 323 Fixes: ee26dad ("libbpf: Add support for relocatable bitfields") Signed-off-by: Andrii Nakryiko <[email protected]> Signed-off-by: Alexei Starovoitov <[email protected]> Acked-by: Lorenz Bauer <[email protected]> Link: https://lore.kernel.org/bpf/[email protected] Signed-off-by: Sasha Levin <[email protected]>
anthraxx
pushed a commit
that referenced
this issue
May 25, 2021
[ Upstream commit 0f20615 ] Fix BPF_CORE_READ_BITFIELD() macro used for reading CO-RE-relocatable bitfields. Missing breaks in a switch caused 8-byte reads always. This can confuse libbpf because it does strict checks that memory load size corresponds to the original size of the field, which in this case quite often would be wrong. After fixing that, we run into another problem, which quite subtle, so worth documenting here. The issue is in Clang optimization and CO-RE relocation interactions. Without that asm volatile construct (also known as barrier_var()), Clang will re-order BYTE_OFFSET and BYTE_SIZE relocations and will apply BYTE_OFFSET 4 times for each switch case arm. This will result in the same error from libbpf about mismatch of memory load size and original field size. I.e., if we were reading u32, we'd still have *(u8 *), *(u16 *), *(u32 *), and *(u64 *) memory loads, three of which will fail. Using barrier_var() forces Clang to apply BYTE_OFFSET relocation first (and once) to calculate p, after which value of p is used without relocation in each of switch case arms, doing appropiately-sized memory load. Here's the list of relevant relocations and pieces of generated BPF code before and after this patch for test_core_reloc_bitfields_direct selftests. BEFORE ===== #45: core_reloc: insn #160 --> [5] + 0:5: byte_sz --> struct core_reloc_bitfields.u32 #46: core_reloc: insn #167 --> [5] + 0:5: byte_off --> struct core_reloc_bitfields.u32 #47: core_reloc: insn #174 --> [5] + 0:5: byte_off --> struct core_reloc_bitfields.u32 #48: core_reloc: insn #178 --> [5] + 0:5: byte_off --> struct core_reloc_bitfields.u32 #49: core_reloc: insn #182 --> [5] + 0:5: byte_off --> struct core_reloc_bitfields.u32 157: 18 02 00 00 00 00 00 00 00 00 00 00 00 00 00 00 r2 = 0 ll 159: 7b 12 20 01 00 00 00 00 *(u64 *)(r2 + 288) = r1 160: b7 02 00 00 04 00 00 00 r2 = 4 ; BYTE_SIZE relocation here ^^^ 161: 66 02 07 00 03 00 00 00 if w2 s> 3 goto +7 <LBB0_63> 162: 16 02 0d 00 01 00 00 00 if w2 == 1 goto +13 <LBB0_65> 163: 16 02 01 00 02 00 00 00 if w2 == 2 goto +1 <LBB0_66> 164: 05 00 12 00 00 00 00 00 goto +18 <LBB0_69> 0000000000000528 <LBB0_66>: 165: 18 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 r1 = 0 ll 167: 69 11 08 00 00 00 00 00 r1 = *(u16 *)(r1 + 8) ; BYTE_OFFSET relo here w/ WRONG size ^^^^^^^^^^^^^^^^ 168: 05 00 0e 00 00 00 00 00 goto +14 <LBB0_69> 0000000000000548 <LBB0_63>: 169: 16 02 0a 00 04 00 00 00 if w2 == 4 goto +10 <LBB0_67> 170: 16 02 01 00 08 00 00 00 if w2 == 8 goto +1 <LBB0_68> 171: 05 00 0b 00 00 00 00 00 goto +11 <LBB0_69> 0000000000000560 <LBB0_68>: 172: 18 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 r1 = 0 ll 174: 79 11 08 00 00 00 00 00 r1 = *(u64 *)(r1 + 8) ; BYTE_OFFSET relo here w/ WRONG size ^^^^^^^^^^^^^^^^ 175: 05 00 07 00 00 00 00 00 goto +7 <LBB0_69> 0000000000000580 <LBB0_65>: 176: 18 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 r1 = 0 ll 178: 71 11 08 00 00 00 00 00 r1 = *(u8 *)(r1 + 8) ; BYTE_OFFSET relo here w/ WRONG size ^^^^^^^^^^^^^^^^ 179: 05 00 03 00 00 00 00 00 goto +3 <LBB0_69> 00000000000005a0 <LBB0_67>: 180: 18 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 r1 = 0 ll 182: 61 11 08 00 00 00 00 00 r1 = *(u32 *)(r1 + 8) ; BYTE_OFFSET relo here w/ RIGHT size ^^^^^^^^^^^^^^^^ 00000000000005b8 <LBB0_69>: 183: 67 01 00 00 20 00 00 00 r1 <<= 32 184: b7 02 00 00 00 00 00 00 r2 = 0 185: 16 02 02 00 00 00 00 00 if w2 == 0 goto +2 <LBB0_71> 186: c7 01 00 00 20 00 00 00 r1 s>>= 32 187: 05 00 01 00 00 00 00 00 goto +1 <LBB0_72> 00000000000005e0 <LBB0_71>: 188: 77 01 00 00 20 00 00 00 r1 >>= 32 AFTER ===== #30: core_reloc: insn #132 --> [5] + 0:5: byte_off --> struct core_reloc_bitfields.u32 #31: core_reloc: insn #134 --> [5] + 0:5: byte_sz --> struct core_reloc_bitfields.u32 129: 18 02 00 00 00 00 00 00 00 00 00 00 00 00 00 00 r2 = 0 ll 131: 7b 12 20 01 00 00 00 00 *(u64 *)(r2 + 288) = r1 132: b7 01 00 00 08 00 00 00 r1 = 8 ; BYTE_OFFSET relo here ^^^ ; no size check for non-memory dereferencing instructions 133: 0f 12 00 00 00 00 00 00 r2 += r1 134: b7 03 00 00 04 00 00 00 r3 = 4 ; BYTE_SIZE relocation here ^^^ 135: 66 03 05 00 03 00 00 00 if w3 s> 3 goto +5 <LBB0_63> 136: 16 03 09 00 01 00 00 00 if w3 == 1 goto +9 <LBB0_65> 137: 16 03 01 00 02 00 00 00 if w3 == 2 goto +1 <LBB0_66> 138: 05 00 0a 00 00 00 00 00 goto +10 <LBB0_69> 0000000000000458 <LBB0_66>: 139: 69 21 00 00 00 00 00 00 r1 = *(u16 *)(r2 + 0) ; NO CO-RE relocation here ^^^^^^^^^^^^^^^^ 140: 05 00 08 00 00 00 00 00 goto +8 <LBB0_69> 0000000000000468 <LBB0_63>: 141: 16 03 06 00 04 00 00 00 if w3 == 4 goto +6 <LBB0_67> 142: 16 03 01 00 08 00 00 00 if w3 == 8 goto +1 <LBB0_68> 143: 05 00 05 00 00 00 00 00 goto +5 <LBB0_69> 0000000000000480 <LBB0_68>: 144: 79 21 00 00 00 00 00 00 r1 = *(u64 *)(r2 + 0) ; NO CO-RE relocation here ^^^^^^^^^^^^^^^^ 145: 05 00 03 00 00 00 00 00 goto +3 <LBB0_69> 0000000000000490 <LBB0_65>: 146: 71 21 00 00 00 00 00 00 r1 = *(u8 *)(r2 + 0) ; NO CO-RE relocation here ^^^^^^^^^^^^^^^^ 147: 05 00 01 00 00 00 00 00 goto +1 <LBB0_69> 00000000000004a0 <LBB0_67>: 148: 61 21 00 00 00 00 00 00 r1 = *(u32 *)(r2 + 0) ; NO CO-RE relocation here ^^^^^^^^^^^^^^^^ 00000000000004a8 <LBB0_69>: 149: 67 01 00 00 20 00 00 00 r1 <<= 32 150: b7 02 00 00 00 00 00 00 r2 = 0 151: 16 02 02 00 00 00 00 00 if w2 == 0 goto +2 <LBB0_71> 152: c7 01 00 00 20 00 00 00 r1 s>>= 32 153: 05 00 01 00 00 00 00 00 goto +1 <LBB0_72> 00000000000004d0 <LBB0_71>: 154: 77 01 00 00 20 00 00 00 r1 >>= 323 Fixes: ee26dad ("libbpf: Add support for relocatable bitfields") Signed-off-by: Andrii Nakryiko <[email protected]> Signed-off-by: Alexei Starovoitov <[email protected]> Acked-by: Lorenz Bauer <[email protected]> Link: https://lore.kernel.org/bpf/[email protected] Signed-off-by: Sasha Levin <[email protected]>
anthraxx
pushed a commit
that referenced
this issue
Aug 12, 2021
[ Upstream commit 7bf0a71 ] To fix possibly the race to access register between the WiFi reset and the other context that is caused by explicitly cancelling ps_work and wake_work to break PM_STATE consistency. Deep sleep would cause the hardware into the inactive state, so we forcely put device drv_own state before we start to reset. The patch also ignore the reset request when the procedure is in progress to avoid the consecutive WiFi resets. localhost ~ # [ 2932.073966] SError Interrupt on CPU7, code 0xbe000011 [ 2932.073967] CPU: 7 PID: 8761 Comm: kworker/u16:2 Not tainted 5.4.112 #30 [ 2932.073968] Hardware name: MediaTek Asurada rev1 board (DT) [ 2932.073968] Workqueue: phy0 ieee80211_reconfig_filter [mac80211] [ 2932.073969] pstate: 80400089 (Nzcv daIf +PAN -UAO) [ 2932.073969] pc : el1_irq+0x78/0x180 [ 2932.073970] lr : mt76_mmio_rmw+0x30/0x5c [mt76] [ 2932.073970] sp : ffffffc01142bad0 [ 2932.073970] x29: ffffffc01142bc00 x28: ffffff8f96fb1e00 [ 2932.073971] x27: ffffffd2cdc12138 x26: ffffffd2cdaeb018 [ 2932.073972] x25: 0000000000000000 x24: ffffff8fa8e14c08 [ 2932.073973] x23: 0000000080c00009 x22: ffffffd2a5603918 [ 2932.073974] x21: ffffffc01142bc10 x20: 0000007fffffffff [ 2932.073975] x19: 0000000000000000 x18: 0000000000000400 [ 2932.073975] x17: 0000000000000400 x16: ffffffd2cd2b87dc [ 2932.073976] x15: 0000000000000000 x14: 0000000000000000 [ 2932.073977] x13: 0000000000000001 x12: 0000000000000001 [ 2932.073978] x11: 0000000000000001 x10: 000000000010e000 [ 2932.073978] x9 : 0000000000000000 x8 : ffffffc013921404 [ 2932.073979] x7 : 000000b2b5593519 x6 : 0000000000300000 [ 2932.073980] x5 : 0000000000000000 x4 : ffffffc01142bbc8 [ 2932.073980] x3 : 00000000000001f0 x2 : 0000000000000000 [ 2932.073981] x1 : 0000000000021404 x0 : ffffff8fa8e12300 [ 2932.073982] Kernel panic - not syncing: Asynchronous SError Interrupt [ 2932.073983] CPU: 7 PID: 8761 Comm: kworker/u16:2 Not tainted 5.4.112 #30 [ 2932.073983] Hardware name: MediaTek Asurada rev1 board (DT) [ 2932.073984] Workqueue: phy0 ieee80211_reconfig_filter [mac80211] [ 2932.073984] Call trace: [ 2932.073985] dump_backtrace+0x0/0x14c [ 2932.073985] show_stack+0x20/0x2c [ 2932.073985] dump_stack+0xa0/0xf8 [ 2932.073986] panic+0x154/0x360 [ 2932.073986] test_taint+0x0/0x44 [ 2932.073986] arm64_serror_panic+0x78/0x84 [ 2932.073987] do_serror+0x0/0x118 [ 2932.073987] do_serror+0xa4/0x118 [ 2932.073987] el1_error+0x84/0xf8 [ 2932.073988] el1_irq+0x78/0x180 [ 2932.073988] mt76_mmio_rr+0x30/0xf0 [mt76] [ 2932.073988] mt76_mmio_rmw+0x30/0x5c [mt76] [ 2932.073989] mt7921_rmw+0x4c/0x5c [mt7921e] [ 2932.073989] mt7921_configure_filter+0x138/0x160 [mt7921e] [ 2932.073990] ieee80211_configure_filter+0x2f0/0x3e0 [mac80211] [ 2932.073990] ieee80211_reconfig_filter+0x1c/0x28 [mac80211] [ 2932.073990] process_one_work+0x208/0x3c8 [ 2932.073991] worker_thread+0x23c/0x3e8 [ 2932.073991] kthread+0x140/0x17c [ 2932.073992] ret_from_fork+0x10/0x18 [ 2932.074071] SMP: stopping secondary CPUs [ 2932.074071] Kernel Offset: 0x12bc800000 from 0xffffffc010000000 [ 2932.074072] PHYS_OFFSET: 0xfffffff180000000 [ 2932.074072] CPU features: 0x080026,2a80aa18 [ 2932.074072] Memory Limit: none Co-developed-by: Lorenzo Bianconi <[email protected]> Signed-off-by: Lorenzo Bianconi <[email protected]> Signed-off-by: Sean Wang <[email protected]> Signed-off-by: Felix Fietkau <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
anthraxx
pushed a commit
that referenced
this issue
Oct 19, 2021
[ Upstream commit 6489f8d ] During boot time kernel configured with OF=y but USE_OF=n displays the following warnings and hangs shortly after starting userspace: ------------[ cut here ]------------ WARNING: CPU: 0 PID: 0 at kernel/irq/irqdomain.c:695 irq_create_mapping_affinity+0x29/0xc0 irq_create_mapping_affinity(, 6) called with NULL domain CPU: 0 PID: 0 Comm: swapper Not tainted 5.15.0-rc3-00001-gd67ed2510d28 #30 Call Trace: __warn+0x69/0xc4 warn_slowpath_fmt+0x6c/0x94 irq_create_mapping_affinity+0x29/0xc0 local_timer_setup+0x40/0x88 time_init+0xb1/0xe8 start_kernel+0x31d/0x3f4 _startup+0x13b/0x13b ---[ end trace 1e6630e1c5eda35b ]--- ------------[ cut here ]------------ WARNING: CPU: 0 PID: 0 at arch/xtensa/kernel/time.c:141 local_timer_setup+0x58/0x88 error: can't map timer irq CPU: 0 PID: 0 Comm: swapper Tainted: G W 5.15.0-rc3-00001-gd67ed2510d28 #30 Call Trace: __warn+0x69/0xc4 warn_slowpath_fmt+0x6c/0x94 local_timer_setup+0x58/0x88 time_init+0xb1/0xe8 start_kernel+0x31d/0x3f4 _startup+0x13b/0x13b ---[ end trace 1e6630e1c5eda35c ]--- Failed to request irq 0 (timer) Fix that by calling irqchip_init only when CONFIG_USE_OF is selected and calling legacy interrupt controller init otherwise. Fixes: da844a8 ("xtensa: add device trees support") Signed-off-by: Max Filippov <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
anthraxx
pushed a commit
that referenced
this issue
Oct 19, 2021
[ Upstream commit 6489f8d ] During boot time kernel configured with OF=y but USE_OF=n displays the following warnings and hangs shortly after starting userspace: ------------[ cut here ]------------ WARNING: CPU: 0 PID: 0 at kernel/irq/irqdomain.c:695 irq_create_mapping_affinity+0x29/0xc0 irq_create_mapping_affinity(, 6) called with NULL domain CPU: 0 PID: 0 Comm: swapper Not tainted 5.15.0-rc3-00001-gd67ed2510d28 #30 Call Trace: __warn+0x69/0xc4 warn_slowpath_fmt+0x6c/0x94 irq_create_mapping_affinity+0x29/0xc0 local_timer_setup+0x40/0x88 time_init+0xb1/0xe8 start_kernel+0x31d/0x3f4 _startup+0x13b/0x13b ---[ end trace 1e6630e1c5eda35b ]--- ------------[ cut here ]------------ WARNING: CPU: 0 PID: 0 at arch/xtensa/kernel/time.c:141 local_timer_setup+0x58/0x88 error: can't map timer irq CPU: 0 PID: 0 Comm: swapper Tainted: G W 5.15.0-rc3-00001-gd67ed2510d28 #30 Call Trace: __warn+0x69/0xc4 warn_slowpath_fmt+0x6c/0x94 local_timer_setup+0x58/0x88 time_init+0xb1/0xe8 start_kernel+0x31d/0x3f4 _startup+0x13b/0x13b ---[ end trace 1e6630e1c5eda35c ]--- Failed to request irq 0 (timer) Fix that by calling irqchip_init only when CONFIG_USE_OF is selected and calling legacy interrupt controller init otherwise. Fixes: da844a8 ("xtensa: add device trees support") Signed-off-by: Max Filippov <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
anthraxx
pushed a commit
that referenced
this issue
Oct 19, 2021
[ Upstream commit 6489f8d ] During boot time kernel configured with OF=y but USE_OF=n displays the following warnings and hangs shortly after starting userspace: ------------[ cut here ]------------ WARNING: CPU: 0 PID: 0 at kernel/irq/irqdomain.c:695 irq_create_mapping_affinity+0x29/0xc0 irq_create_mapping_affinity(, 6) called with NULL domain CPU: 0 PID: 0 Comm: swapper Not tainted 5.15.0-rc3-00001-gd67ed2510d28 #30 Call Trace: __warn+0x69/0xc4 warn_slowpath_fmt+0x6c/0x94 irq_create_mapping_affinity+0x29/0xc0 local_timer_setup+0x40/0x88 time_init+0xb1/0xe8 start_kernel+0x31d/0x3f4 _startup+0x13b/0x13b ---[ end trace 1e6630e1c5eda35b ]--- ------------[ cut here ]------------ WARNING: CPU: 0 PID: 0 at arch/xtensa/kernel/time.c:141 local_timer_setup+0x58/0x88 error: can't map timer irq CPU: 0 PID: 0 Comm: swapper Tainted: G W 5.15.0-rc3-00001-gd67ed2510d28 #30 Call Trace: __warn+0x69/0xc4 warn_slowpath_fmt+0x6c/0x94 local_timer_setup+0x58/0x88 time_init+0xb1/0xe8 start_kernel+0x31d/0x3f4 _startup+0x13b/0x13b ---[ end trace 1e6630e1c5eda35c ]--- Failed to request irq 0 (timer) Fix that by calling irqchip_init only when CONFIG_USE_OF is selected and calling legacy interrupt controller init otherwise. Fixes: da844a8 ("xtensa: add device trees support") Signed-off-by: Max Filippov <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
anthraxx
pushed a commit
that referenced
this issue
Oct 19, 2021
[ Upstream commit 6489f8d ] During boot time kernel configured with OF=y but USE_OF=n displays the following warnings and hangs shortly after starting userspace: ------------[ cut here ]------------ WARNING: CPU: 0 PID: 0 at kernel/irq/irqdomain.c:695 irq_create_mapping_affinity+0x29/0xc0 irq_create_mapping_affinity(, 6) called with NULL domain CPU: 0 PID: 0 Comm: swapper Not tainted 5.15.0-rc3-00001-gd67ed2510d28 #30 Call Trace: __warn+0x69/0xc4 warn_slowpath_fmt+0x6c/0x94 irq_create_mapping_affinity+0x29/0xc0 local_timer_setup+0x40/0x88 time_init+0xb1/0xe8 start_kernel+0x31d/0x3f4 _startup+0x13b/0x13b ---[ end trace 1e6630e1c5eda35b ]--- ------------[ cut here ]------------ WARNING: CPU: 0 PID: 0 at arch/xtensa/kernel/time.c:141 local_timer_setup+0x58/0x88 error: can't map timer irq CPU: 0 PID: 0 Comm: swapper Tainted: G W 5.15.0-rc3-00001-gd67ed2510d28 #30 Call Trace: __warn+0x69/0xc4 warn_slowpath_fmt+0x6c/0x94 local_timer_setup+0x58/0x88 time_init+0xb1/0xe8 start_kernel+0x31d/0x3f4 _startup+0x13b/0x13b ---[ end trace 1e6630e1c5eda35c ]--- Failed to request irq 0 (timer) Fix that by calling irqchip_init only when CONFIG_USE_OF is selected and calling legacy interrupt controller init otherwise. Fixes: da844a8 ("xtensa: add device trees support") Signed-off-by: Max Filippov <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
anthraxx
pushed a commit
that referenced
this issue
Oct 19, 2021
[ Upstream commit 6489f8d ] During boot time kernel configured with OF=y but USE_OF=n displays the following warnings and hangs shortly after starting userspace: ------------[ cut here ]------------ WARNING: CPU: 0 PID: 0 at kernel/irq/irqdomain.c:695 irq_create_mapping_affinity+0x29/0xc0 irq_create_mapping_affinity(, 6) called with NULL domain CPU: 0 PID: 0 Comm: swapper Not tainted 5.15.0-rc3-00001-gd67ed2510d28 #30 Call Trace: __warn+0x69/0xc4 warn_slowpath_fmt+0x6c/0x94 irq_create_mapping_affinity+0x29/0xc0 local_timer_setup+0x40/0x88 time_init+0xb1/0xe8 start_kernel+0x31d/0x3f4 _startup+0x13b/0x13b ---[ end trace 1e6630e1c5eda35b ]--- ------------[ cut here ]------------ WARNING: CPU: 0 PID: 0 at arch/xtensa/kernel/time.c:141 local_timer_setup+0x58/0x88 error: can't map timer irq CPU: 0 PID: 0 Comm: swapper Tainted: G W 5.15.0-rc3-00001-gd67ed2510d28 #30 Call Trace: __warn+0x69/0xc4 warn_slowpath_fmt+0x6c/0x94 local_timer_setup+0x58/0x88 time_init+0xb1/0xe8 start_kernel+0x31d/0x3f4 _startup+0x13b/0x13b ---[ end trace 1e6630e1c5eda35c ]--- Failed to request irq 0 (timer) Fix that by calling irqchip_init only when CONFIG_USE_OF is selected and calling legacy interrupt controller init otherwise. Fixes: da844a8 ("xtensa: add device trees support") Signed-off-by: Max Filippov <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
anthraxx
pushed a commit
that referenced
this issue
Nov 10, 2021
During boot time kernel configured with OF=y but USE_OF=n displays the following warnings and hangs shortly after starting userspace: ------------[ cut here ]------------ WARNING: CPU: 0 PID: 0 at kernel/irq/irqdomain.c:695 irq_create_mapping_affinity+0x29/0xc0 irq_create_mapping_affinity(, 6) called with NULL domain CPU: 0 PID: 0 Comm: swapper Not tainted 5.15.0-rc3-00001-gd67ed2510d28 #30 Call Trace: __warn+0x69/0xc4 warn_slowpath_fmt+0x6c/0x94 irq_create_mapping_affinity+0x29/0xc0 local_timer_setup+0x40/0x88 time_init+0xb1/0xe8 start_kernel+0x31d/0x3f4 _startup+0x13b/0x13b ---[ end trace 1e6630e1c5eda35b ]--- ------------[ cut here ]------------ WARNING: CPU: 0 PID: 0 at arch/xtensa/kernel/time.c:141 local_timer_setup+0x58/0x88 error: can't map timer irq CPU: 0 PID: 0 Comm: swapper Tainted: G W 5.15.0-rc3-00001-gd67ed2510d28 #30 Call Trace: __warn+0x69/0xc4 warn_slowpath_fmt+0x6c/0x94 local_timer_setup+0x58/0x88 time_init+0xb1/0xe8 start_kernel+0x31d/0x3f4 _startup+0x13b/0x13b ---[ end trace 1e6630e1c5eda35c ]--- Failed to request irq 0 (timer) Fix that by calling irqchip_init only when CONFIG_USE_OF is selected and calling legacy interrupt controller init otherwise. Fixes: da844a8 ("xtensa: add device trees support") Signed-off-by: Max Filippov <[email protected]>
anthraxx
pushed a commit
that referenced
this issue
Nov 18, 2021
[ Upstream commit d412137 ] The perf_buffer fails on system with offline cpus: # test_progs -t perf_buffer test_perf_buffer:PASS:nr_cpus 0 nsec test_perf_buffer:PASS:nr_on_cpus 0 nsec test_perf_buffer:PASS:skel_load 0 nsec test_perf_buffer:PASS:attach_kprobe 0 nsec test_perf_buffer:PASS:perf_buf__new 0 nsec test_perf_buffer:PASS:epoll_fd 0 nsec skipping offline CPU #24 skipping offline CPU #25 skipping offline CPU #26 skipping offline CPU #27 skipping offline CPU #28 skipping offline CPU #29 skipping offline CPU #30 skipping offline CPU #31 test_perf_buffer:PASS:perf_buffer__poll 0 nsec test_perf_buffer:PASS:seen_cpu_cnt 0 nsec test_perf_buffer:FAIL:buf_cnt got 24, expected 32 Summary: 0/0 PASSED, 0 SKIPPED, 1 FAILED Changing the test to check online cpus instead of possible. Signed-off-by: Jiri Olsa <[email protected]> Signed-off-by: Andrii Nakryiko <[email protected]> Acked-by: John Fastabend <[email protected]> Link: https://lore.kernel.org/bpf/[email protected] Signed-off-by: Sasha Levin <[email protected]>
anthraxx
pushed a commit
that referenced
this issue
Nov 18, 2021
[ Upstream commit d412137 ] The perf_buffer fails on system with offline cpus: # test_progs -t perf_buffer test_perf_buffer:PASS:nr_cpus 0 nsec test_perf_buffer:PASS:nr_on_cpus 0 nsec test_perf_buffer:PASS:skel_load 0 nsec test_perf_buffer:PASS:attach_kprobe 0 nsec test_perf_buffer:PASS:perf_buf__new 0 nsec test_perf_buffer:PASS:epoll_fd 0 nsec skipping offline CPU #24 skipping offline CPU #25 skipping offline CPU #26 skipping offline CPU #27 skipping offline CPU #28 skipping offline CPU #29 skipping offline CPU #30 skipping offline CPU #31 test_perf_buffer:PASS:perf_buffer__poll 0 nsec test_perf_buffer:PASS:seen_cpu_cnt 0 nsec test_perf_buffer:FAIL:buf_cnt got 24, expected 32 Summary: 0/0 PASSED, 0 SKIPPED, 1 FAILED Changing the test to check online cpus instead of possible. Signed-off-by: Jiri Olsa <[email protected]> Signed-off-by: Andrii Nakryiko <[email protected]> Acked-by: John Fastabend <[email protected]> Link: https://lore.kernel.org/bpf/[email protected] Signed-off-by: Sasha Levin <[email protected]>
anthraxx
pushed a commit
that referenced
this issue
Nov 18, 2021
[ Upstream commit d412137 ] The perf_buffer fails on system with offline cpus: # test_progs -t perf_buffer test_perf_buffer:PASS:nr_cpus 0 nsec test_perf_buffer:PASS:nr_on_cpus 0 nsec test_perf_buffer:PASS:skel_load 0 nsec test_perf_buffer:PASS:attach_kprobe 0 nsec test_perf_buffer:PASS:perf_buf__new 0 nsec test_perf_buffer:PASS:epoll_fd 0 nsec skipping offline CPU #24 skipping offline CPU #25 skipping offline CPU #26 skipping offline CPU #27 skipping offline CPU #28 skipping offline CPU #29 skipping offline CPU #30 skipping offline CPU #31 test_perf_buffer:PASS:perf_buffer__poll 0 nsec test_perf_buffer:PASS:seen_cpu_cnt 0 nsec test_perf_buffer:FAIL:buf_cnt got 24, expected 32 Summary: 0/0 PASSED, 0 SKIPPED, 1 FAILED Changing the test to check online cpus instead of possible. Signed-off-by: Jiri Olsa <[email protected]> Signed-off-by: Andrii Nakryiko <[email protected]> Acked-by: John Fastabend <[email protected]> Link: https://lore.kernel.org/bpf/[email protected] Signed-off-by: Sasha Levin <[email protected]>
anthraxx
pushed a commit
that referenced
this issue
Mar 18, 2023
…vmsg_parser() [ Upstream commit d900f3d ] When the buffer length of the recvmsg system call is 0, we got the flollowing soft lockup problem: watchdog: BUG: soft lockup - CPU#3 stuck for 27s! [a.out:6149] CPU: 3 PID: 6149 Comm: a.out Kdump: loaded Not tainted 6.2.0+ #30 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.15.0-1 04/01/2014 RIP: 0010:remove_wait_queue+0xb/0xc0 Code: 5e 41 5f c3 cc cc cc cc 0f 1f 80 00 00 00 00 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 f3 0f 1e fa 0f 1f 44 00 00 41 57 <41> 56 41 55 41 54 55 48 89 fd 53 48 89 f3 4c 8d 6b 18 4c 8d 73 20 RSP: 0018:ffff88811b5978b8 EFLAGS: 00000246 RAX: 0000000000000000 RBX: ffff88811a7d3780 RCX: ffffffffb7a4d768 RDX: dffffc0000000000 RSI: ffff88811b597908 RDI: ffff888115408040 RBP: 1ffff110236b2f1b R08: 0000000000000000 R09: ffff88811a7d37e7 R10: ffffed10234fa6fc R11: 0000000000000001 R12: ffff88811179b800 R13: 0000000000000001 R14: ffff88811a7d38a8 R15: ffff88811a7d37e0 FS: 00007f6fb5398740(0000) GS:ffff888237180000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000020000000 CR3: 000000010b6ba002 CR4: 0000000000370ee0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> tcp_msg_wait_data+0x279/0x2f0 tcp_bpf_recvmsg_parser+0x3c6/0x490 inet_recvmsg+0x280/0x290 sock_recvmsg+0xfc/0x120 ____sys_recvmsg+0x160/0x3d0 ___sys_recvmsg+0xf0/0x180 __sys_recvmsg+0xea/0x1a0 do_syscall_64+0x3f/0x90 entry_SYSCALL_64_after_hwframe+0x72/0xdc The logic in tcp_bpf_recvmsg_parser is as follows: msg_bytes_ready: copied = sk_msg_recvmsg(sk, psock, msg, len, flags); if (!copied) { wait data; goto msg_bytes_ready; } In this case, "copied" always is 0, the infinite loop occurs. According to the Linux system call man page, 0 should be returned in this case. Therefore, in tcp_bpf_recvmsg_parser(), if the length is 0, directly return. Also modify several other functions with the same problem. Fixes: 1f5be6b ("udp: Implement udp_bpf_recvmsg() for sockmap") Fixes: 9825d86 ("af_unix: Implement unix_dgram_bpf_recvmsg()") Fixes: c5d2177 ("bpf, sockmap: Fix race in ingress receive verdict with redirect to self") Fixes: 604326b ("bpf, sockmap: convert to generic sk_msg interface") Signed-off-by: Liu Jian <[email protected]> Signed-off-by: Daniel Borkmann <[email protected]> Acked-by: John Fastabend <[email protected]> Cc: Jakub Sitnicki <[email protected]> Link: https://lore.kernel.org/bpf/[email protected] Signed-off-by: Sasha Levin <[email protected]>
anthraxx
pushed a commit
that referenced
this issue
Mar 18, 2023
…vmsg_parser() [ Upstream commit d900f3d ] When the buffer length of the recvmsg system call is 0, we got the flollowing soft lockup problem: watchdog: BUG: soft lockup - CPU#3 stuck for 27s! [a.out:6149] CPU: 3 PID: 6149 Comm: a.out Kdump: loaded Not tainted 6.2.0+ #30 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.15.0-1 04/01/2014 RIP: 0010:remove_wait_queue+0xb/0xc0 Code: 5e 41 5f c3 cc cc cc cc 0f 1f 80 00 00 00 00 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 f3 0f 1e fa 0f 1f 44 00 00 41 57 <41> 56 41 55 41 54 55 48 89 fd 53 48 89 f3 4c 8d 6b 18 4c 8d 73 20 RSP: 0018:ffff88811b5978b8 EFLAGS: 00000246 RAX: 0000000000000000 RBX: ffff88811a7d3780 RCX: ffffffffb7a4d768 RDX: dffffc0000000000 RSI: ffff88811b597908 RDI: ffff888115408040 RBP: 1ffff110236b2f1b R08: 0000000000000000 R09: ffff88811a7d37e7 R10: ffffed10234fa6fc R11: 0000000000000001 R12: ffff88811179b800 R13: 0000000000000001 R14: ffff88811a7d38a8 R15: ffff88811a7d37e0 FS: 00007f6fb5398740(0000) GS:ffff888237180000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000020000000 CR3: 000000010b6ba002 CR4: 0000000000370ee0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> tcp_msg_wait_data+0x279/0x2f0 tcp_bpf_recvmsg_parser+0x3c6/0x490 inet_recvmsg+0x280/0x290 sock_recvmsg+0xfc/0x120 ____sys_recvmsg+0x160/0x3d0 ___sys_recvmsg+0xf0/0x180 __sys_recvmsg+0xea/0x1a0 do_syscall_64+0x3f/0x90 entry_SYSCALL_64_after_hwframe+0x72/0xdc The logic in tcp_bpf_recvmsg_parser is as follows: msg_bytes_ready: copied = sk_msg_recvmsg(sk, psock, msg, len, flags); if (!copied) { wait data; goto msg_bytes_ready; } In this case, "copied" always is 0, the infinite loop occurs. According to the Linux system call man page, 0 should be returned in this case. Therefore, in tcp_bpf_recvmsg_parser(), if the length is 0, directly return. Also modify several other functions with the same problem. Fixes: 1f5be6b ("udp: Implement udp_bpf_recvmsg() for sockmap") Fixes: 9825d86 ("af_unix: Implement unix_dgram_bpf_recvmsg()") Fixes: c5d2177 ("bpf, sockmap: Fix race in ingress receive verdict with redirect to self") Fixes: 604326b ("bpf, sockmap: convert to generic sk_msg interface") Signed-off-by: Liu Jian <[email protected]> Signed-off-by: Daniel Borkmann <[email protected]> Acked-by: John Fastabend <[email protected]> Cc: Jakub Sitnicki <[email protected]> Link: https://lore.kernel.org/bpf/[email protected] Signed-off-by: Sasha Levin <[email protected]>
anthraxx
pushed a commit
that referenced
this issue
Jun 27, 2023
…vmsg_parser() [ Upstream commit d900f3d ] When the buffer length of the recvmsg system call is 0, we got the flollowing soft lockup problem: watchdog: BUG: soft lockup - CPU#3 stuck for 27s! [a.out:6149] CPU: 3 PID: 6149 Comm: a.out Kdump: loaded Not tainted 6.2.0+ #30 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.15.0-1 04/01/2014 RIP: 0010:remove_wait_queue+0xb/0xc0 Code: 5e 41 5f c3 cc cc cc cc 0f 1f 80 00 00 00 00 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 f3 0f 1e fa 0f 1f 44 00 00 41 57 <41> 56 41 55 41 54 55 48 89 fd 53 48 89 f3 4c 8d 6b 18 4c 8d 73 20 RSP: 0018:ffff88811b5978b8 EFLAGS: 00000246 RAX: 0000000000000000 RBX: ffff88811a7d3780 RCX: ffffffffb7a4d768 RDX: dffffc0000000000 RSI: ffff88811b597908 RDI: ffff888115408040 RBP: 1ffff110236b2f1b R08: 0000000000000000 R09: ffff88811a7d37e7 R10: ffffed10234fa6fc R11: 0000000000000001 R12: ffff88811179b800 R13: 0000000000000001 R14: ffff88811a7d38a8 R15: ffff88811a7d37e0 FS: 00007f6fb5398740(0000) GS:ffff888237180000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000020000000 CR3: 000000010b6ba002 CR4: 0000000000370ee0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> tcp_msg_wait_data+0x279/0x2f0 tcp_bpf_recvmsg_parser+0x3c6/0x490 inet_recvmsg+0x280/0x290 sock_recvmsg+0xfc/0x120 ____sys_recvmsg+0x160/0x3d0 ___sys_recvmsg+0xf0/0x180 __sys_recvmsg+0xea/0x1a0 do_syscall_64+0x3f/0x90 entry_SYSCALL_64_after_hwframe+0x72/0xdc The logic in tcp_bpf_recvmsg_parser is as follows: msg_bytes_ready: copied = sk_msg_recvmsg(sk, psock, msg, len, flags); if (!copied) { wait data; goto msg_bytes_ready; } In this case, "copied" always is 0, the infinite loop occurs. According to the Linux system call man page, 0 should be returned in this case. Therefore, in tcp_bpf_recvmsg_parser(), if the length is 0, directly return. Also modify several other functions with the same problem. Fixes: 1f5be6b ("udp: Implement udp_bpf_recvmsg() for sockmap") Fixes: 9825d86 ("af_unix: Implement unix_dgram_bpf_recvmsg()") Fixes: c5d2177 ("bpf, sockmap: Fix race in ingress receive verdict with redirect to self") Fixes: 604326b ("bpf, sockmap: convert to generic sk_msg interface") Signed-off-by: Liu Jian <[email protected]> Signed-off-by: Daniel Borkmann <[email protected]> Acked-by: John Fastabend <[email protected]> Cc: Jakub Sitnicki <[email protected]> Link: https://lore.kernel.org/bpf/[email protected] Signed-off-by: Sasha Levin <[email protected]>
anthraxx
pushed a commit
that referenced
this issue
Nov 23, 2023
…it_event_hooks() [ Upstream commit 91cfe0b ] When CONFIG_HID_UCLOGIC=y and CONFIG_KUNIT_ALL_TESTS=y, launch kernel and then the below user-memory-access bug occurs. In hid_test_uclogic_params_cleanup_event_hooks(),it call uclogic_params_ugee_v2_init_event_hooks() with the first arg=NULL, so when it calls uclogic_params_ugee_v2_has_battery(), the hid_get_drvdata() will access hdev->dev with hdev=NULL, which will cause below user-memory-access. So add a fake_device with quirks member and call hid_set_drvdata() to assign hdev->dev->driver_data which avoids the null-ptr-def bug for drvdata->quirks in uclogic_params_ugee_v2_has_battery(). After applying this patch, the below user-memory-access bug never occurs. general protection fault, probably for non-canonical address 0xdffffc0000000329: 0000 [#1] PREEMPT SMP KASAN KASAN: probably user-memory-access in range [0x0000000000001948-0x000000000000194f] CPU: 5 PID: 2189 Comm: kunit_try_catch Tainted: G B W N 6.6.0-rc2+ #30 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04/01/2014 RIP: 0010:uclogic_params_ugee_v2_init_event_hooks+0x87/0x600 Code: f3 f3 65 48 8b 14 25 28 00 00 00 48 89 54 24 60 31 d2 48 89 fa c7 44 24 30 00 00 00 00 48 c7 44 24 28 02 f8 02 01 48 c1 ea 03 <80> 3c 02 00 0f 85 2c 04 00 00 48 8b 9d 48 19 00 00 48 b8 00 00 00 RSP: 0000:ffff88810679fc88 EFLAGS: 00010202 RAX: dffffc0000000000 RBX: 0000000000000004 RCX: 0000000000000000 RDX: 0000000000000329 RSI: ffff88810679fd88 RDI: 0000000000001948 RBP: 0000000000000000 R08: 0000000000000000 R09: ffffed1020f639f0 R10: ffff888107b1cf87 R11: 0000000000000400 R12: 1ffff11020cf3f92 R13: ffff88810679fd88 R14: ffff888100b97b08 R15: ffff8881030bb080 FS: 0000000000000000(0000) GS:ffff888119e80000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000000 CR3: 0000000005286001 CR4: 0000000000770ee0 DR0: ffffffff8fdd6cf4 DR1: ffffffff8fdd6cf5 DR2: ffffffff8fdd6cf6 DR3: ffffffff8fdd6cf7 DR6: 00000000fffe0ff0 DR7: 0000000000000600 PKRU: 55555554 Call Trace: <TASK> ? die_addr+0x3d/0xa0 ? exc_general_protection+0x144/0x220 ? asm_exc_general_protection+0x22/0x30 ? uclogic_params_ugee_v2_init_event_hooks+0x87/0x600 ? sched_clock_cpu+0x69/0x550 ? uclogic_parse_ugee_v2_desc_gen_params+0x70/0x70 ? load_balance+0x2950/0x2950 ? rcu_trc_cmpxchg_need_qs+0x67/0xa0 hid_test_uclogic_params_cleanup_event_hooks+0x9e/0x1a0 ? uclogic_params_ugee_v2_init_event_hooks+0x600/0x600 ? __switch_to+0x5cf/0xe60 ? migrate_enable+0x260/0x260 ? __kthread_parkme+0x83/0x150 ? kunit_try_run_case_cleanup+0xe0/0xe0 kunit_generic_run_threadfn_adapter+0x4a/0x90 ? kunit_try_catch_throw+0x80/0x80 kthread+0x2b5/0x380 ? kthread_complete_and_exit+0x20/0x20 ret_from_fork+0x2d/0x70 ? kthread_complete_and_exit+0x20/0x20 ret_from_fork_asm+0x11/0x20 </TASK> Modules linked in: Dumping ftrace buffer: (ftrace buffer empty) ---[ end trace 0000000000000000 ]--- RIP: 0010:uclogic_params_ugee_v2_init_event_hooks+0x87/0x600 Code: f3 f3 65 48 8b 14 25 28 00 00 00 48 89 54 24 60 31 d2 48 89 fa c7 44 24 30 00 00 00 00 48 c7 44 24 28 02 f8 02 01 48 c1 ea 03 <80> 3c 02 00 0f 85 2c 04 00 00 48 8b 9d 48 19 00 00 48 b8 00 00 00 RSP: 0000:ffff88810679fc88 EFLAGS: 00010202 RAX: dffffc0000000000 RBX: 0000000000000004 RCX: 0000000000000000 RDX: 0000000000000329 RSI: ffff88810679fd88 RDI: 0000000000001948 RBP: 0000000000000000 R08: 0000000000000000 R09: ffffed1020f639f0 R10: ffff888107b1cf87 R11: 0000000000000400 R12: 1ffff11020cf3f92 R13: ffff88810679fd88 R14: ffff888100b97b08 R15: ffff8881030bb080 FS: 0000000000000000(0000) GS:ffff888119e80000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000000 CR3: 0000000005286001 CR4: 0000000000770ee0 DR0: ffffffff8fdd6cf4 DR1: ffffffff8fdd6cf5 DR2: ffffffff8fdd6cf6 DR3: ffffffff8fdd6cf7 DR6: 00000000fffe0ff0 DR7: 0000000000000600 PKRU: 55555554 Kernel panic - not syncing: Fatal exception Dumping ftrace buffer: (ftrace buffer empty) Kernel Offset: disabled Rebooting in 1 seconds.. Fixes: a251d65 ("HID: uclogic: Handle wireless device reconnection") Signed-off-by: Jinjie Ruan <[email protected]> Reviewed-by: José Expósito <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Benjamin Tissoires <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
anthraxx
pushed a commit
that referenced
this issue
Nov 23, 2023
[ Upstream commit d45f72b ] When CONFIG_HID_UCLOGIC=y and CONFIG_KUNIT_ALL_TESTS=y, launch kernel and then the below work->entry not empty bug occurs. In hid_test_uclogic_exec_event_hook_test(), the filter->work is not initialized to be added to p.event_hooks->list, and then the schedule_work() in uclogic_exec_event_hook() will call __queue_work(), which check whether the work->entry is empty and cause the below warning call trace. So call INIT_WORK() with a fake work to solve the issue. After applying this patch, the below work->entry not empty bug never occurs. WARNING: CPU: 0 PID: 2177 at kernel/workqueue.c:1787 __queue_work.part.0+0x780/0xad0 Modules linked in: CPU: 0 PID: 2177 Comm: kunit_try_catch Tainted: G B W N 6.6.0-rc2+ #30 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04/01/2014 RIP: 0010:__queue_work.part.0+0x780/0xad0 Code: 44 24 20 0f b6 00 84 c0 74 08 3c 03 0f 8e 52 03 00 00 f6 83 00 01 00 00 02 74 6f 4c 89 ef e8 c7 d8 f1 02 f3 90 e9 e5 f8 ff ff <0f> 0b e9 63 fc ff ff 89 e9 49 8d 57 68 4c 89 e6 4c 89 ff 83 c9 02 RSP: 0000:ffff888102bb7ce8 EFLAGS: 00010086 RAX: 0000000000000000 RBX: ffff888106b8e460 RCX: ffffffff84141cc7 RDX: 1ffff11020d71c8c RSI: 0000000000000004 RDI: ffff8881001d0118 RBP: dffffc0000000000 R08: 0000000000000001 R09: ffffed1020576f92 R10: 0000000000000003 R11: ffff888102bb7980 R12: ffff888106b8e458 R13: ffff888119c38800 R14: 0000000000000000 R15: ffff8881001d0100 FS: 0000000000000000(0000) GS:ffff888119c00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: ffff888119506000 CR3: 0000000005286001 CR4: 0000000000770ef0 DR0: ffffffff8fdd6ce0 DR1: ffffffff8fdd6ce1 DR2: ffffffff8fdd6ce3 DR3: ffffffff8fdd6ce5 DR6: 00000000fffe0ff0 DR7: 0000000000000600 PKRU: 55555554 Call Trace: <TASK> ? __warn+0xc9/0x260 ? __queue_work.part.0+0x780/0xad0 ? report_bug+0x345/0x400 ? handle_bug+0x3c/0x70 ? exc_invalid_op+0x14/0x40 ? asm_exc_invalid_op+0x16/0x20 ? _raw_spin_lock+0x87/0xe0 ? __queue_work.part.0+0x780/0xad0 ? __queue_work.part.0+0x249/0xad0 queue_work_on+0x48/0x50 uclogic_exec_event_hook.isra.0+0xf7/0x160 hid_test_uclogic_exec_event_hook_test+0x2f1/0x5d0 ? try_to_wake_up+0x151/0x13e0 ? uclogic_exec_event_hook.isra.0+0x160/0x160 ? _raw_spin_lock_irqsave+0x8d/0xe0 ? __sched_text_end+0xa/0xa ? __sched_text_end+0xa/0xa ? migrate_enable+0x260/0x260 ? kunit_try_run_case_cleanup+0xe0/0xe0 kunit_generic_run_threadfn_adapter+0x4a/0x90 ? kunit_try_catch_throw+0x80/0x80 kthread+0x2b5/0x380 ? kthread_complete_and_exit+0x20/0x20 ret_from_fork+0x2d/0x70 ? kthread_complete_and_exit+0x20/0x20 ret_from_fork_asm+0x11/0x20 </TASK> Fixes: a251d65 ("HID: uclogic: Handle wireless device reconnection") Signed-off-by: Jinjie Ruan <[email protected]> Reviewed-by: José Expósito <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Benjamin Tissoires <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
anthraxx
pushed a commit
that referenced
this issue
Dec 9, 2023
…it_event_hooks() [ Upstream commit 91cfe0b ] When CONFIG_HID_UCLOGIC=y and CONFIG_KUNIT_ALL_TESTS=y, launch kernel and then the below user-memory-access bug occurs. In hid_test_uclogic_params_cleanup_event_hooks(),it call uclogic_params_ugee_v2_init_event_hooks() with the first arg=NULL, so when it calls uclogic_params_ugee_v2_has_battery(), the hid_get_drvdata() will access hdev->dev with hdev=NULL, which will cause below user-memory-access. So add a fake_device with quirks member and call hid_set_drvdata() to assign hdev->dev->driver_data which avoids the null-ptr-def bug for drvdata->quirks in uclogic_params_ugee_v2_has_battery(). After applying this patch, the below user-memory-access bug never occurs. general protection fault, probably for non-canonical address 0xdffffc0000000329: 0000 [#1] PREEMPT SMP KASAN KASAN: probably user-memory-access in range [0x0000000000001948-0x000000000000194f] CPU: 5 PID: 2189 Comm: kunit_try_catch Tainted: G B W N 6.6.0-rc2+ #30 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04/01/2014 RIP: 0010:uclogic_params_ugee_v2_init_event_hooks+0x87/0x600 Code: f3 f3 65 48 8b 14 25 28 00 00 00 48 89 54 24 60 31 d2 48 89 fa c7 44 24 30 00 00 00 00 48 c7 44 24 28 02 f8 02 01 48 c1 ea 03 <80> 3c 02 00 0f 85 2c 04 00 00 48 8b 9d 48 19 00 00 48 b8 00 00 00 RSP: 0000:ffff88810679fc88 EFLAGS: 00010202 RAX: dffffc0000000000 RBX: 0000000000000004 RCX: 0000000000000000 RDX: 0000000000000329 RSI: ffff88810679fd88 RDI: 0000000000001948 RBP: 0000000000000000 R08: 0000000000000000 R09: ffffed1020f639f0 R10: ffff888107b1cf87 R11: 0000000000000400 R12: 1ffff11020cf3f92 R13: ffff88810679fd88 R14: ffff888100b97b08 R15: ffff8881030bb080 FS: 0000000000000000(0000) GS:ffff888119e80000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000000 CR3: 0000000005286001 CR4: 0000000000770ee0 DR0: ffffffff8fdd6cf4 DR1: ffffffff8fdd6cf5 DR2: ffffffff8fdd6cf6 DR3: ffffffff8fdd6cf7 DR6: 00000000fffe0ff0 DR7: 0000000000000600 PKRU: 55555554 Call Trace: <TASK> ? die_addr+0x3d/0xa0 ? exc_general_protection+0x144/0x220 ? asm_exc_general_protection+0x22/0x30 ? uclogic_params_ugee_v2_init_event_hooks+0x87/0x600 ? sched_clock_cpu+0x69/0x550 ? uclogic_parse_ugee_v2_desc_gen_params+0x70/0x70 ? load_balance+0x2950/0x2950 ? rcu_trc_cmpxchg_need_qs+0x67/0xa0 hid_test_uclogic_params_cleanup_event_hooks+0x9e/0x1a0 ? uclogic_params_ugee_v2_init_event_hooks+0x600/0x600 ? __switch_to+0x5cf/0xe60 ? migrate_enable+0x260/0x260 ? __kthread_parkme+0x83/0x150 ? kunit_try_run_case_cleanup+0xe0/0xe0 kunit_generic_run_threadfn_adapter+0x4a/0x90 ? kunit_try_catch_throw+0x80/0x80 kthread+0x2b5/0x380 ? kthread_complete_and_exit+0x20/0x20 ret_from_fork+0x2d/0x70 ? kthread_complete_and_exit+0x20/0x20 ret_from_fork_asm+0x11/0x20 </TASK> Modules linked in: Dumping ftrace buffer: (ftrace buffer empty) ---[ end trace 0000000000000000 ]--- RIP: 0010:uclogic_params_ugee_v2_init_event_hooks+0x87/0x600 Code: f3 f3 65 48 8b 14 25 28 00 00 00 48 89 54 24 60 31 d2 48 89 fa c7 44 24 30 00 00 00 00 48 c7 44 24 28 02 f8 02 01 48 c1 ea 03 <80> 3c 02 00 0f 85 2c 04 00 00 48 8b 9d 48 19 00 00 48 b8 00 00 00 RSP: 0000:ffff88810679fc88 EFLAGS: 00010202 RAX: dffffc0000000000 RBX: 0000000000000004 RCX: 0000000000000000 RDX: 0000000000000329 RSI: ffff88810679fd88 RDI: 0000000000001948 RBP: 0000000000000000 R08: 0000000000000000 R09: ffffed1020f639f0 R10: ffff888107b1cf87 R11: 0000000000000400 R12: 1ffff11020cf3f92 R13: ffff88810679fd88 R14: ffff888100b97b08 R15: ffff8881030bb080 FS: 0000000000000000(0000) GS:ffff888119e80000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000000 CR3: 0000000005286001 CR4: 0000000000770ee0 DR0: ffffffff8fdd6cf4 DR1: ffffffff8fdd6cf5 DR2: ffffffff8fdd6cf6 DR3: ffffffff8fdd6cf7 DR6: 00000000fffe0ff0 DR7: 0000000000000600 PKRU: 55555554 Kernel panic - not syncing: Fatal exception Dumping ftrace buffer: (ftrace buffer empty) Kernel Offset: disabled Rebooting in 1 seconds.. Fixes: a251d65 ("HID: uclogic: Handle wireless device reconnection") Signed-off-by: Jinjie Ruan <[email protected]> Reviewed-by: José Expósito <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Benjamin Tissoires <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
anthraxx
pushed a commit
that referenced
this issue
Dec 9, 2023
[ Upstream commit d45f72b ] When CONFIG_HID_UCLOGIC=y and CONFIG_KUNIT_ALL_TESTS=y, launch kernel and then the below work->entry not empty bug occurs. In hid_test_uclogic_exec_event_hook_test(), the filter->work is not initialized to be added to p.event_hooks->list, and then the schedule_work() in uclogic_exec_event_hook() will call __queue_work(), which check whether the work->entry is empty and cause the below warning call trace. So call INIT_WORK() with a fake work to solve the issue. After applying this patch, the below work->entry not empty bug never occurs. WARNING: CPU: 0 PID: 2177 at kernel/workqueue.c:1787 __queue_work.part.0+0x780/0xad0 Modules linked in: CPU: 0 PID: 2177 Comm: kunit_try_catch Tainted: G B W N 6.6.0-rc2+ #30 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04/01/2014 RIP: 0010:__queue_work.part.0+0x780/0xad0 Code: 44 24 20 0f b6 00 84 c0 74 08 3c 03 0f 8e 52 03 00 00 f6 83 00 01 00 00 02 74 6f 4c 89 ef e8 c7 d8 f1 02 f3 90 e9 e5 f8 ff ff <0f> 0b e9 63 fc ff ff 89 e9 49 8d 57 68 4c 89 e6 4c 89 ff 83 c9 02 RSP: 0000:ffff888102bb7ce8 EFLAGS: 00010086 RAX: 0000000000000000 RBX: ffff888106b8e460 RCX: ffffffff84141cc7 RDX: 1ffff11020d71c8c RSI: 0000000000000004 RDI: ffff8881001d0118 RBP: dffffc0000000000 R08: 0000000000000001 R09: ffffed1020576f92 R10: 0000000000000003 R11: ffff888102bb7980 R12: ffff888106b8e458 R13: ffff888119c38800 R14: 0000000000000000 R15: ffff8881001d0100 FS: 0000000000000000(0000) GS:ffff888119c00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: ffff888119506000 CR3: 0000000005286001 CR4: 0000000000770ef0 DR0: ffffffff8fdd6ce0 DR1: ffffffff8fdd6ce1 DR2: ffffffff8fdd6ce3 DR3: ffffffff8fdd6ce5 DR6: 00000000fffe0ff0 DR7: 0000000000000600 PKRU: 55555554 Call Trace: <TASK> ? __warn+0xc9/0x260 ? __queue_work.part.0+0x780/0xad0 ? report_bug+0x345/0x400 ? handle_bug+0x3c/0x70 ? exc_invalid_op+0x14/0x40 ? asm_exc_invalid_op+0x16/0x20 ? _raw_spin_lock+0x87/0xe0 ? __queue_work.part.0+0x780/0xad0 ? __queue_work.part.0+0x249/0xad0 queue_work_on+0x48/0x50 uclogic_exec_event_hook.isra.0+0xf7/0x160 hid_test_uclogic_exec_event_hook_test+0x2f1/0x5d0 ? try_to_wake_up+0x151/0x13e0 ? uclogic_exec_event_hook.isra.0+0x160/0x160 ? _raw_spin_lock_irqsave+0x8d/0xe0 ? __sched_text_end+0xa/0xa ? __sched_text_end+0xa/0xa ? migrate_enable+0x260/0x260 ? kunit_try_run_case_cleanup+0xe0/0xe0 kunit_generic_run_threadfn_adapter+0x4a/0x90 ? kunit_try_catch_throw+0x80/0x80 kthread+0x2b5/0x380 ? kthread_complete_and_exit+0x20/0x20 ret_from_fork+0x2d/0x70 ? kthread_complete_and_exit+0x20/0x20 ret_from_fork_asm+0x11/0x20 </TASK> Fixes: a251d65 ("HID: uclogic: Handle wireless device reconnection") Signed-off-by: Jinjie Ruan <[email protected]> Reviewed-by: José Expósito <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Benjamin Tissoires <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
anthraxx
pushed a commit
that referenced
this issue
Mar 6, 2024
[ Upstream commit fad87db ] The PAPR spec spells the function name as "ibm,reset-pe-dma-windows" but in practice firmware uses the singular form: "ibm,reset-pe-dma-window" in the device tree. Since we have the wrong spelling in the RTAS function table, reverse lookups (token -> name) fail and warn: unexpected failed lookup for token 86 WARNING: CPU: 1 PID: 545 at arch/powerpc/kernel/rtas.c:659 __do_enter_rtas_trace+0x2a4/0x2b4 CPU: 1 PID: 545 Comm: systemd-udevd Not tainted 6.8.0-rc4 #30 Hardware name: IBM,9105-22A POWER10 (raw) 0x800200 0xf000006 of:IBM,FW1060.00 (NL1060_028) hv:phyp pSeries NIP [c0000000000417f0] __do_enter_rtas_trace+0x2a4/0x2b4 LR [c0000000000417ec] __do_enter_rtas_trace+0x2a0/0x2b4 Call Trace: __do_enter_rtas_trace+0x2a0/0x2b4 (unreliable) rtas_call+0x1f8/0x3e0 enable_ddw.constprop.0+0x4d0/0xc84 dma_iommu_dma_supported+0xe8/0x24c dma_set_mask+0x5c/0xd8 mlx5_pci_init.constprop.0+0xf0/0x46c [mlx5_core] probe_one+0xfc/0x32c [mlx5_core] local_pci_probe+0x68/0x12c pci_call_probe+0x68/0x1ec pci_device_probe+0xbc/0x1a8 really_probe+0x104/0x570 __driver_probe_device+0xb8/0x224 driver_probe_device+0x54/0x130 __driver_attach+0x158/0x2b0 bus_for_each_dev+0xa8/0x120 driver_attach+0x34/0x48 bus_add_driver+0x174/0x304 driver_register+0x8c/0x1c4 __pci_register_driver+0x68/0x7c mlx5_init+0xb8/0x118 [mlx5_core] do_one_initcall+0x60/0x388 do_init_module+0x7c/0x2a4 init_module_from_file+0xb4/0x108 idempotent_init_module+0x184/0x34c sys_finit_module+0x90/0x114 And oopses are possible when lockdep is enabled or the RTAS tracepoints are active, since those paths dereference the result of the lookup. Use the correct spelling to match firmware's behavior, adjusting the related constants to match. Signed-off-by: Nathan Lynch <[email protected]> Fixes: 8252b88 ("powerpc/rtas: improve function information lookups") Reported-by: Gaurav Batra <[email protected]> Signed-off-by: Michael Ellerman <[email protected]> Link: https://msgid.link/20240222-rtas-fix-ibm-reset-pe-dma-window-v1-1-7aaf235ac63c@linux.ibm.com Signed-off-by: Sasha Levin <[email protected]>
anthraxx
pushed a commit
that referenced
this issue
Mar 6, 2024
[ Upstream commit fad87db ] The PAPR spec spells the function name as "ibm,reset-pe-dma-windows" but in practice firmware uses the singular form: "ibm,reset-pe-dma-window" in the device tree. Since we have the wrong spelling in the RTAS function table, reverse lookups (token -> name) fail and warn: unexpected failed lookup for token 86 WARNING: CPU: 1 PID: 545 at arch/powerpc/kernel/rtas.c:659 __do_enter_rtas_trace+0x2a4/0x2b4 CPU: 1 PID: 545 Comm: systemd-udevd Not tainted 6.8.0-rc4 #30 Hardware name: IBM,9105-22A POWER10 (raw) 0x800200 0xf000006 of:IBM,FW1060.00 (NL1060_028) hv:phyp pSeries NIP [c0000000000417f0] __do_enter_rtas_trace+0x2a4/0x2b4 LR [c0000000000417ec] __do_enter_rtas_trace+0x2a0/0x2b4 Call Trace: __do_enter_rtas_trace+0x2a0/0x2b4 (unreliable) rtas_call+0x1f8/0x3e0 enable_ddw.constprop.0+0x4d0/0xc84 dma_iommu_dma_supported+0xe8/0x24c dma_set_mask+0x5c/0xd8 mlx5_pci_init.constprop.0+0xf0/0x46c [mlx5_core] probe_one+0xfc/0x32c [mlx5_core] local_pci_probe+0x68/0x12c pci_call_probe+0x68/0x1ec pci_device_probe+0xbc/0x1a8 really_probe+0x104/0x570 __driver_probe_device+0xb8/0x224 driver_probe_device+0x54/0x130 __driver_attach+0x158/0x2b0 bus_for_each_dev+0xa8/0x120 driver_attach+0x34/0x48 bus_add_driver+0x174/0x304 driver_register+0x8c/0x1c4 __pci_register_driver+0x68/0x7c mlx5_init+0xb8/0x118 [mlx5_core] do_one_initcall+0x60/0x388 do_init_module+0x7c/0x2a4 init_module_from_file+0xb4/0x108 idempotent_init_module+0x184/0x34c sys_finit_module+0x90/0x114 And oopses are possible when lockdep is enabled or the RTAS tracepoints are active, since those paths dereference the result of the lookup. Use the correct spelling to match firmware's behavior, adjusting the related constants to match. Signed-off-by: Nathan Lynch <[email protected]> Fixes: 8252b88 ("powerpc/rtas: improve function information lookups") Reported-by: Gaurav Batra <[email protected]> Signed-off-by: Michael Ellerman <[email protected]> Link: https://msgid.link/20240222-rtas-fix-ibm-reset-pe-dma-window-v1-1-7aaf235ac63c@linux.ibm.com Signed-off-by: Sasha Levin <[email protected]>
anthraxx
pushed a commit
that referenced
this issue
May 19, 2024
Currently, enabling SG_DEBUG in the kernel will cause nouveau to hit a BUG() on startup: kernel BUG at include/linux/scatterlist.h:187! invalid opcode: 0000 [#1] PREEMPT SMP NOPTI CPU: 7 PID: 930 Comm: (udev-worker) Not tainted 6.9.0-rc3Lyude-Test+ #30 Hardware name: MSI MS-7A39/A320M GAMING PRO (MS-7A39), BIOS 1.I0 01/22/2019 RIP: 0010:sg_init_one+0x85/0xa0 Code: 69 88 32 01 83 e1 03 f6 c3 03 75 20 a8 01 75 1e 48 09 cb 41 89 54 24 08 49 89 1c 24 41 89 6c 24 0c 5b 5d 41 5c e9 7b b9 88 00 <0f> 0b 0f 0b 0f 0b 48 8b 05 5e 46 9a 01 eb b2 66 66 2e 0f 1f 84 00 RSP: 0018:ffffa776017bf6a0 EFLAGS: 00010246 RAX: 0000000000000000 RBX: ffffa77600d87000 RCX: 000000000000002b RDX: 0000000000000001 RSI: 0000000000000000 RDI: ffffa77680d87000 RBP: 000000000000e000 R08: 0000000000000000 R09: 0000000000000000 R10: ffff98f4c46aa508 R11: 0000000000000000 R12: ffff98f4c46aa508 R13: ffff98f4c46aa008 R14: ffffa77600d4a000 R15: ffffa77600d4a018 FS: 00007feeb5aae980(0000) GS:ffff98f5c4dc0000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f22cb9a4520 CR3: 00000001043ba000 CR4: 00000000003506f0 Call Trace: <TASK> ? die+0x36/0x90 ? do_trap+0xdd/0x100 ? sg_init_one+0x85/0xa0 ? do_error_trap+0x65/0x80 ? sg_init_one+0x85/0xa0 ? exc_invalid_op+0x50/0x70 ? sg_init_one+0x85/0xa0 ? asm_exc_invalid_op+0x1a/0x20 ? sg_init_one+0x85/0xa0 nvkm_firmware_ctor+0x14a/0x250 [nouveau] nvkm_falcon_fw_ctor+0x42/0x70 [nouveau] ga102_gsp_booter_ctor+0xb4/0x1a0 [nouveau] r535_gsp_oneinit+0xb3/0x15f0 [nouveau] ? srso_return_thunk+0x5/0x5f ? srso_return_thunk+0x5/0x5f ? nvkm_udevice_new+0x95/0x140 [nouveau] ? srso_return_thunk+0x5/0x5f ? srso_return_thunk+0x5/0x5f ? ktime_get+0x47/0xb0 ? srso_return_thunk+0x5/0x5f nvkm_subdev_oneinit_+0x4f/0x120 [nouveau] nvkm_subdev_init_+0x39/0x140 [nouveau] ? srso_return_thunk+0x5/0x5f nvkm_subdev_init+0x44/0x90 [nouveau] nvkm_device_init+0x166/0x2e0 [nouveau] nvkm_udevice_init+0x47/0x70 [nouveau] nvkm_object_init+0x41/0x1c0 [nouveau] nvkm_ioctl_new+0x16a/0x290 [nouveau] ? __pfx_nvkm_client_child_new+0x10/0x10 [nouveau] ? __pfx_nvkm_udevice_new+0x10/0x10 [nouveau] nvkm_ioctl+0x126/0x290 [nouveau] nvif_object_ctor+0x112/0x190 [nouveau] nvif_device_ctor+0x23/0x60 [nouveau] nouveau_cli_init+0x164/0x640 [nouveau] nouveau_drm_device_init+0x97/0x9e0 [nouveau] ? srso_return_thunk+0x5/0x5f ? pci_update_current_state+0x72/0xb0 ? srso_return_thunk+0x5/0x5f nouveau_drm_probe+0x12c/0x280 [nouveau] ? srso_return_thunk+0x5/0x5f local_pci_probe+0x45/0xa0 pci_device_probe+0xc7/0x270 really_probe+0xe6/0x3a0 __driver_probe_device+0x87/0x160 driver_probe_device+0x1f/0xc0 __driver_attach+0xec/0x1f0 ? __pfx___driver_attach+0x10/0x10 bus_for_each_dev+0x88/0xd0 bus_add_driver+0x116/0x220 driver_register+0x59/0x100 ? __pfx_nouveau_drm_init+0x10/0x10 [nouveau] do_one_initcall+0x5b/0x320 do_init_module+0x60/0x250 init_module_from_file+0x86/0xc0 idempotent_init_module+0x120/0x2b0 __x64_sys_finit_module+0x5e/0xb0 do_syscall_64+0x83/0x160 ? srso_return_thunk+0x5/0x5f entry_SYSCALL_64_after_hwframe+0x71/0x79 RIP: 0033:0x7feeb5cc20cd Code: ff c3 66 2e 0f 1f 84 00 00 00 00 00 90 f3 0f 1e fa 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 1b cd 0c 00 f7 d8 64 89 01 48 RSP: 002b:00007ffcf220b2c8 EFLAGS: 00000246 ORIG_RAX: 0000000000000139 RAX: ffffffffffffffda RBX: 000055fdd2916aa0 RCX: 00007feeb5cc20cd RDX: 0000000000000000 RSI: 000055fdd29161e0 RDI: 0000000000000035 RBP: 00007ffcf220b380 R08: 00007feeb5d8fb20 R09: 00007ffcf220b310 R10: 000055fdd2909dc0 R11: 0000000000000246 R12: 000055fdd29161e0 R13: 0000000000020000 R14: 000055fdd29203e0 R15: 000055fdd2909d80 </TASK> We hit this when trying to initialize firmware of type NVKM_FIRMWARE_IMG_DMA because we allocate our memory with dma_alloc_coherent, and DMA allocations can't be turned back into memory pages - which a scatterlist needs in order to map them. So, fix this by allocating the memory with vmalloc instead(). V2: * Fixup explanation as the prior one was bogus Signed-off-by: Lyude Paul <[email protected]> Reviewed-by: Dave Airlie <[email protected]> Cc: [email protected] Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
anthraxx
pushed a commit
that referenced
this issue
May 20, 2024
commit 52a6947 upstream. Currently, enabling SG_DEBUG in the kernel will cause nouveau to hit a BUG() on startup: kernel BUG at include/linux/scatterlist.h:187! invalid opcode: 0000 [#1] PREEMPT SMP NOPTI CPU: 7 PID: 930 Comm: (udev-worker) Not tainted 6.9.0-rc3Lyude-Test+ #30 Hardware name: MSI MS-7A39/A320M GAMING PRO (MS-7A39), BIOS 1.I0 01/22/2019 RIP: 0010:sg_init_one+0x85/0xa0 Code: 69 88 32 01 83 e1 03 f6 c3 03 75 20 a8 01 75 1e 48 09 cb 41 89 54 24 08 49 89 1c 24 41 89 6c 24 0c 5b 5d 41 5c e9 7b b9 88 00 <0f> 0b 0f 0b 0f 0b 48 8b 05 5e 46 9a 01 eb b2 66 66 2e 0f 1f 84 00 RSP: 0018:ffffa776017bf6a0 EFLAGS: 00010246 RAX: 0000000000000000 RBX: ffffa77600d87000 RCX: 000000000000002b RDX: 0000000000000001 RSI: 0000000000000000 RDI: ffffa77680d87000 RBP: 000000000000e000 R08: 0000000000000000 R09: 0000000000000000 R10: ffff98f4c46aa508 R11: 0000000000000000 R12: ffff98f4c46aa508 R13: ffff98f4c46aa008 R14: ffffa77600d4a000 R15: ffffa77600d4a018 FS: 00007feeb5aae980(0000) GS:ffff98f5c4dc0000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f22cb9a4520 CR3: 00000001043ba000 CR4: 00000000003506f0 Call Trace: <TASK> ? die+0x36/0x90 ? do_trap+0xdd/0x100 ? sg_init_one+0x85/0xa0 ? do_error_trap+0x65/0x80 ? sg_init_one+0x85/0xa0 ? exc_invalid_op+0x50/0x70 ? sg_init_one+0x85/0xa0 ? asm_exc_invalid_op+0x1a/0x20 ? sg_init_one+0x85/0xa0 nvkm_firmware_ctor+0x14a/0x250 [nouveau] nvkm_falcon_fw_ctor+0x42/0x70 [nouveau] ga102_gsp_booter_ctor+0xb4/0x1a0 [nouveau] r535_gsp_oneinit+0xb3/0x15f0 [nouveau] ? srso_return_thunk+0x5/0x5f ? srso_return_thunk+0x5/0x5f ? nvkm_udevice_new+0x95/0x140 [nouveau] ? srso_return_thunk+0x5/0x5f ? srso_return_thunk+0x5/0x5f ? ktime_get+0x47/0xb0 ? srso_return_thunk+0x5/0x5f nvkm_subdev_oneinit_+0x4f/0x120 [nouveau] nvkm_subdev_init_+0x39/0x140 [nouveau] ? srso_return_thunk+0x5/0x5f nvkm_subdev_init+0x44/0x90 [nouveau] nvkm_device_init+0x166/0x2e0 [nouveau] nvkm_udevice_init+0x47/0x70 [nouveau] nvkm_object_init+0x41/0x1c0 [nouveau] nvkm_ioctl_new+0x16a/0x290 [nouveau] ? __pfx_nvkm_client_child_new+0x10/0x10 [nouveau] ? __pfx_nvkm_udevice_new+0x10/0x10 [nouveau] nvkm_ioctl+0x126/0x290 [nouveau] nvif_object_ctor+0x112/0x190 [nouveau] nvif_device_ctor+0x23/0x60 [nouveau] nouveau_cli_init+0x164/0x640 [nouveau] nouveau_drm_device_init+0x97/0x9e0 [nouveau] ? srso_return_thunk+0x5/0x5f ? pci_update_current_state+0x72/0xb0 ? srso_return_thunk+0x5/0x5f nouveau_drm_probe+0x12c/0x280 [nouveau] ? srso_return_thunk+0x5/0x5f local_pci_probe+0x45/0xa0 pci_device_probe+0xc7/0x270 really_probe+0xe6/0x3a0 __driver_probe_device+0x87/0x160 driver_probe_device+0x1f/0xc0 __driver_attach+0xec/0x1f0 ? __pfx___driver_attach+0x10/0x10 bus_for_each_dev+0x88/0xd0 bus_add_driver+0x116/0x220 driver_register+0x59/0x100 ? __pfx_nouveau_drm_init+0x10/0x10 [nouveau] do_one_initcall+0x5b/0x320 do_init_module+0x60/0x250 init_module_from_file+0x86/0xc0 idempotent_init_module+0x120/0x2b0 __x64_sys_finit_module+0x5e/0xb0 do_syscall_64+0x83/0x160 ? srso_return_thunk+0x5/0x5f entry_SYSCALL_64_after_hwframe+0x71/0x79 RIP: 0033:0x7feeb5cc20cd Code: ff c3 66 2e 0f 1f 84 00 00 00 00 00 90 f3 0f 1e fa 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 1b cd 0c 00 f7 d8 64 89 01 48 RSP: 002b:00007ffcf220b2c8 EFLAGS: 00000246 ORIG_RAX: 0000000000000139 RAX: ffffffffffffffda RBX: 000055fdd2916aa0 RCX: 00007feeb5cc20cd RDX: 0000000000000000 RSI: 000055fdd29161e0 RDI: 0000000000000035 RBP: 00007ffcf220b380 R08: 00007feeb5d8fb20 R09: 00007ffcf220b310 R10: 000055fdd2909dc0 R11: 0000000000000246 R12: 000055fdd29161e0 R13: 0000000000020000 R14: 000055fdd29203e0 R15: 000055fdd2909d80 </TASK> We hit this when trying to initialize firmware of type NVKM_FIRMWARE_IMG_DMA because we allocate our memory with dma_alloc_coherent, and DMA allocations can't be turned back into memory pages - which a scatterlist needs in order to map them. So, fix this by allocating the memory with vmalloc instead(). V2: * Fixup explanation as the prior one was bogus Signed-off-by: Lyude Paul <[email protected]> Reviewed-by: Dave Airlie <[email protected]> Cc: [email protected] Link: https://patchwork.freedesktop.org/patch/msgid/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
anthraxx
pushed a commit
that referenced
this issue
May 20, 2024
commit 52a6947 upstream. Currently, enabling SG_DEBUG in the kernel will cause nouveau to hit a BUG() on startup: kernel BUG at include/linux/scatterlist.h:187! invalid opcode: 0000 [#1] PREEMPT SMP NOPTI CPU: 7 PID: 930 Comm: (udev-worker) Not tainted 6.9.0-rc3Lyude-Test+ #30 Hardware name: MSI MS-7A39/A320M GAMING PRO (MS-7A39), BIOS 1.I0 01/22/2019 RIP: 0010:sg_init_one+0x85/0xa0 Code: 69 88 32 01 83 e1 03 f6 c3 03 75 20 a8 01 75 1e 48 09 cb 41 89 54 24 08 49 89 1c 24 41 89 6c 24 0c 5b 5d 41 5c e9 7b b9 88 00 <0f> 0b 0f 0b 0f 0b 48 8b 05 5e 46 9a 01 eb b2 66 66 2e 0f 1f 84 00 RSP: 0018:ffffa776017bf6a0 EFLAGS: 00010246 RAX: 0000000000000000 RBX: ffffa77600d87000 RCX: 000000000000002b RDX: 0000000000000001 RSI: 0000000000000000 RDI: ffffa77680d87000 RBP: 000000000000e000 R08: 0000000000000000 R09: 0000000000000000 R10: ffff98f4c46aa508 R11: 0000000000000000 R12: ffff98f4c46aa508 R13: ffff98f4c46aa008 R14: ffffa77600d4a000 R15: ffffa77600d4a018 FS: 00007feeb5aae980(0000) GS:ffff98f5c4dc0000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f22cb9a4520 CR3: 00000001043ba000 CR4: 00000000003506f0 Call Trace: <TASK> ? die+0x36/0x90 ? do_trap+0xdd/0x100 ? sg_init_one+0x85/0xa0 ? do_error_trap+0x65/0x80 ? sg_init_one+0x85/0xa0 ? exc_invalid_op+0x50/0x70 ? sg_init_one+0x85/0xa0 ? asm_exc_invalid_op+0x1a/0x20 ? sg_init_one+0x85/0xa0 nvkm_firmware_ctor+0x14a/0x250 [nouveau] nvkm_falcon_fw_ctor+0x42/0x70 [nouveau] ga102_gsp_booter_ctor+0xb4/0x1a0 [nouveau] r535_gsp_oneinit+0xb3/0x15f0 [nouveau] ? srso_return_thunk+0x5/0x5f ? srso_return_thunk+0x5/0x5f ? nvkm_udevice_new+0x95/0x140 [nouveau] ? srso_return_thunk+0x5/0x5f ? srso_return_thunk+0x5/0x5f ? ktime_get+0x47/0xb0 ? srso_return_thunk+0x5/0x5f nvkm_subdev_oneinit_+0x4f/0x120 [nouveau] nvkm_subdev_init_+0x39/0x140 [nouveau] ? srso_return_thunk+0x5/0x5f nvkm_subdev_init+0x44/0x90 [nouveau] nvkm_device_init+0x166/0x2e0 [nouveau] nvkm_udevice_init+0x47/0x70 [nouveau] nvkm_object_init+0x41/0x1c0 [nouveau] nvkm_ioctl_new+0x16a/0x290 [nouveau] ? __pfx_nvkm_client_child_new+0x10/0x10 [nouveau] ? __pfx_nvkm_udevice_new+0x10/0x10 [nouveau] nvkm_ioctl+0x126/0x290 [nouveau] nvif_object_ctor+0x112/0x190 [nouveau] nvif_device_ctor+0x23/0x60 [nouveau] nouveau_cli_init+0x164/0x640 [nouveau] nouveau_drm_device_init+0x97/0x9e0 [nouveau] ? srso_return_thunk+0x5/0x5f ? pci_update_current_state+0x72/0xb0 ? srso_return_thunk+0x5/0x5f nouveau_drm_probe+0x12c/0x280 [nouveau] ? srso_return_thunk+0x5/0x5f local_pci_probe+0x45/0xa0 pci_device_probe+0xc7/0x270 really_probe+0xe6/0x3a0 __driver_probe_device+0x87/0x160 driver_probe_device+0x1f/0xc0 __driver_attach+0xec/0x1f0 ? __pfx___driver_attach+0x10/0x10 bus_for_each_dev+0x88/0xd0 bus_add_driver+0x116/0x220 driver_register+0x59/0x100 ? __pfx_nouveau_drm_init+0x10/0x10 [nouveau] do_one_initcall+0x5b/0x320 do_init_module+0x60/0x250 init_module_from_file+0x86/0xc0 idempotent_init_module+0x120/0x2b0 __x64_sys_finit_module+0x5e/0xb0 do_syscall_64+0x83/0x160 ? srso_return_thunk+0x5/0x5f entry_SYSCALL_64_after_hwframe+0x71/0x79 RIP: 0033:0x7feeb5cc20cd Code: ff c3 66 2e 0f 1f 84 00 00 00 00 00 90 f3 0f 1e fa 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 1b cd 0c 00 f7 d8 64 89 01 48 RSP: 002b:00007ffcf220b2c8 EFLAGS: 00000246 ORIG_RAX: 0000000000000139 RAX: ffffffffffffffda RBX: 000055fdd2916aa0 RCX: 00007feeb5cc20cd RDX: 0000000000000000 RSI: 000055fdd29161e0 RDI: 0000000000000035 RBP: 00007ffcf220b380 R08: 00007feeb5d8fb20 R09: 00007ffcf220b310 R10: 000055fdd2909dc0 R11: 0000000000000246 R12: 000055fdd29161e0 R13: 0000000000020000 R14: 000055fdd29203e0 R15: 000055fdd2909d80 </TASK> We hit this when trying to initialize firmware of type NVKM_FIRMWARE_IMG_DMA because we allocate our memory with dma_alloc_coherent, and DMA allocations can't be turned back into memory pages - which a scatterlist needs in order to map them. So, fix this by allocating the memory with vmalloc instead(). V2: * Fixup explanation as the prior one was bogus Signed-off-by: Lyude Paul <[email protected]> Reviewed-by: Dave Airlie <[email protected]> Cc: [email protected] Link: https://patchwork.freedesktop.org/patch/msgid/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
anthraxx
pushed a commit
that referenced
this issue
Sep 7, 2024
commit 9b340ae upstream. Currently, enabling SG_DEBUG in the kernel will cause nouveau to hit a BUG() on startup, when the iommu is enabled: kernel BUG at include/linux/scatterlist.h:187! invalid opcode: 0000 [#1] PREEMPT SMP NOPTI CPU: 7 PID: 930 Comm: (udev-worker) Not tainted 6.9.0-rc3Lyude-Test+ #30 Hardware name: MSI MS-7A39/A320M GAMING PRO (MS-7A39), BIOS 1.I0 01/22/2019 RIP: 0010:sg_init_one+0x85/0xa0 Code: 69 88 32 01 83 e1 03 f6 c3 03 75 20 a8 01 75 1e 48 09 cb 41 89 54 24 08 49 89 1c 24 41 89 6c 24 0c 5b 5d 41 5c e9 7b b9 88 00 <0f> 0b 0f 0b 0f 0b 48 8b 05 5e 46 9a 01 eb b2 66 66 2e 0f 1f 84 00 RSP: 0018:ffffa776017bf6a0 EFLAGS: 00010246 RAX: 0000000000000000 RBX: ffffa77600d87000 RCX: 000000000000002b RDX: 0000000000000001 RSI: 0000000000000000 RDI: ffffa77680d87000 RBP: 000000000000e000 R08: 0000000000000000 R09: 0000000000000000 R10: ffff98f4c46aa508 R11: 0000000000000000 R12: ffff98f4c46aa508 R13: ffff98f4c46aa008 R14: ffffa77600d4a000 R15: ffffa77600d4a018 FS: 00007feeb5aae980(0000) GS:ffff98f5c4dc0000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f22cb9a4520 CR3: 00000001043ba000 CR4: 00000000003506f0 Call Trace: <TASK> ? die+0x36/0x90 ? do_trap+0xdd/0x100 ? sg_init_one+0x85/0xa0 ? do_error_trap+0x65/0x80 ? sg_init_one+0x85/0xa0 ? exc_invalid_op+0x50/0x70 ? sg_init_one+0x85/0xa0 ? asm_exc_invalid_op+0x1a/0x20 ? sg_init_one+0x85/0xa0 nvkm_firmware_ctor+0x14a/0x250 [nouveau] nvkm_falcon_fw_ctor+0x42/0x70 [nouveau] ga102_gsp_booter_ctor+0xb4/0x1a0 [nouveau] r535_gsp_oneinit+0xb3/0x15f0 [nouveau] ? srso_return_thunk+0x5/0x5f ? srso_return_thunk+0x5/0x5f ? nvkm_udevice_new+0x95/0x140 [nouveau] ? srso_return_thunk+0x5/0x5f ? srso_return_thunk+0x5/0x5f ? ktime_get+0x47/0xb0 Fix this by using the non-coherent allocator instead, I think there might be a better answer to this, but it involve ripping up some of APIs using sg lists. Cc: [email protected] Fixes: 2541626 ("drm/nouveau/acr: use common falcon HS FW code for ACR FWs") Signed-off-by: Dave Airlie <[email protected]> Signed-off-by: Danilo Krummrich <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
anthraxx
pushed a commit
that referenced
this issue
Sep 7, 2024
commit 9b340ae upstream. Currently, enabling SG_DEBUG in the kernel will cause nouveau to hit a BUG() on startup, when the iommu is enabled: kernel BUG at include/linux/scatterlist.h:187! invalid opcode: 0000 [#1] PREEMPT SMP NOPTI CPU: 7 PID: 930 Comm: (udev-worker) Not tainted 6.9.0-rc3Lyude-Test+ #30 Hardware name: MSI MS-7A39/A320M GAMING PRO (MS-7A39), BIOS 1.I0 01/22/2019 RIP: 0010:sg_init_one+0x85/0xa0 Code: 69 88 32 01 83 e1 03 f6 c3 03 75 20 a8 01 75 1e 48 09 cb 41 89 54 24 08 49 89 1c 24 41 89 6c 24 0c 5b 5d 41 5c e9 7b b9 88 00 <0f> 0b 0f 0b 0f 0b 48 8b 05 5e 46 9a 01 eb b2 66 66 2e 0f 1f 84 00 RSP: 0018:ffffa776017bf6a0 EFLAGS: 00010246 RAX: 0000000000000000 RBX: ffffa77600d87000 RCX: 000000000000002b RDX: 0000000000000001 RSI: 0000000000000000 RDI: ffffa77680d87000 RBP: 000000000000e000 R08: 0000000000000000 R09: 0000000000000000 R10: ffff98f4c46aa508 R11: 0000000000000000 R12: ffff98f4c46aa508 R13: ffff98f4c46aa008 R14: ffffa77600d4a000 R15: ffffa77600d4a018 FS: 00007feeb5aae980(0000) GS:ffff98f5c4dc0000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f22cb9a4520 CR3: 00000001043ba000 CR4: 00000000003506f0 Call Trace: <TASK> ? die+0x36/0x90 ? do_trap+0xdd/0x100 ? sg_init_one+0x85/0xa0 ? do_error_trap+0x65/0x80 ? sg_init_one+0x85/0xa0 ? exc_invalid_op+0x50/0x70 ? sg_init_one+0x85/0xa0 ? asm_exc_invalid_op+0x1a/0x20 ? sg_init_one+0x85/0xa0 nvkm_firmware_ctor+0x14a/0x250 [nouveau] nvkm_falcon_fw_ctor+0x42/0x70 [nouveau] ga102_gsp_booter_ctor+0xb4/0x1a0 [nouveau] r535_gsp_oneinit+0xb3/0x15f0 [nouveau] ? srso_return_thunk+0x5/0x5f ? srso_return_thunk+0x5/0x5f ? nvkm_udevice_new+0x95/0x140 [nouveau] ? srso_return_thunk+0x5/0x5f ? srso_return_thunk+0x5/0x5f ? ktime_get+0x47/0xb0 Fix this by using the non-coherent allocator instead, I think there might be a better answer to this, but it involve ripping up some of APIs using sg lists. Cc: [email protected] Fixes: 2541626 ("drm/nouveau/acr: use common falcon HS FW code for ACR FWs") Signed-off-by: Dave Airlie <[email protected]> Signed-off-by: Danilo Krummrich <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
Stable kernels have various security features that LTS kernels don't have such as lockdown, SafeSetID, page allocator freelist randomization, init_on_alloc etc. I think linux-hardened should backport/reimplement those security features in LTS kernels.
I can contribute many of these myself if you're interested. I've created some patches already.
This would be especially useful for Whonix's hardened-kernel as we're using LTS kernels for greater stability and less attack surface.
The text was updated successfully, but these errors were encountered: