Samsung ELPM482-00005 BMS compatability

[mattthemadscientist]

I'm hoping to get these batteries working with victron solar charge controllers and selectronic inverters. I've included an installation manual that has the communication protocol from the Samsung BMS, but I am unsure if this is the same as the "Samsung BMS" recently added to bms-to-inverter.

key components of the BMS are listed as:

<style> </style>

MCU	STM32F105VCT6	-
Current Sensing IC	R2A24060	-
AFE	ML5236	14Ch
Shunt Resistor	PSR500HTQFH1L00	1mΩ, 1%, 5W, 2 Parallel
2nd protection fuse	BZ05-640	75A, 64Ω
FET	FDB019N807L	Rated 270A, 80Vdc 5 Parallel
Fuse	250GH-63UL	250V, 63A

Is this the same architecture that the Samsung BMS has already supported? there are quite a few of these batteries becoming available here in Australia, and they are nearing the end of their storage life if we don't come up with a solution to make sure we can utilise them.

I'll have to become a sponsor I think :-) this is an amazing project and you have done more for the environment by developing this than many do in a lifetime.

4.84kWh_Standard_Product_Specification(1)[92].pdf

[ai-republic]

Hi @mattthemadscientist,
this is matches exactly the SAMSUNG_BMS binding that I already implemented.
You don't have to be a sponsor to get reply 😆 but any help is very much appreciated 😉