SIMWE model: R.SIM.WATER

[xycarto]

Maybe the GRASS discussion board is not the best for this, but I am having some significant difficulty finding any discussion of the r.sim.water tool and the SIMWE model it uses. Maybe someone here could help point me in the right direction?

By far, the r.sim.water tool is one of the best tools for flood modelling in terms of scalability and development into scripted methods.
I have been doing a good amount of research on the tool you developed and have a few questions if anyone has the time. I am very interested in developing this tool into a rapid flood prediction model at a national scale. I have found there is not a lot of information about the SIMWE process out there, outside of a few academic papers that implemented the model in urban spaces but those papers do not talk much about the SIMWE process itself.

Here are some questions I am trying to find answers to:

1. The biggest difficulty I am facing is trying to convince others this is a good tool for a generalized flood prediction model. There seems to be little documentation to back up the use of this tool or its implementation. Many folks I talk to would like me to move to either a SWAT or HEC-RAS approach to flood modelling. I like this tool, as it is a perfect set up for scale dprocessing, but I get the feeling even the authors may not be using it much these days. My question is, is the SIMWE model outdated in favour of newer models or is it still relevant today? If so, is there some sort of documentation I use to demonstrate this?
2. I do have some difficulties in developing perimeters for the tool, since there is little explanation describing what the purpose of each perimeter is. Is there a definitive guide that an engineer like myself might be able to use that better describes the function of the perimeters?
3. Overall, I am following a lost cause for the SIMWE model and should I focus my attention solely on SWAT or HEC-RAS?

[petrasovaa]

Hi,

SIMWE is not outdated and it is still being used, but I agree the documentation could be better. Here is lecture, maybe you can find some useful info: https://www.youtube.com/watch?v=v0jj4UKJmoQ&list=PLiNYVMuYqTHXjIZyTSpiNzCAADzeabNlc&index=31

But academic papers should have the parametrization of the model described, so I would assume you could find useful information there.

[xycarto]

Cheers @petrasovaa

The presentation is quite helpful and will get me a bit further. It helps with some of the perimeterization of the tool. Thank you for the response :)

It at least drives me to take a closer look at my elevation model. I am just not getting the flow I would expect from the tool, but this is very likely user error and not the tool.

I will continue to look around for further explanation of the perimeters. Ideally, if I could just talk to an expert for about 20 minutes, that'd be ace. In the meantime, I will see if I can get an example to share around up an running on Git.

[petrasovaa]

The model is for shallow water flow, so it's possible you have issues in some areas, because they are not "shallow"... In these cases you can try increase diffusion by lowering hmax or increasing halpha.

[xycarto]

Awesome! Thanks @petrasovaa !

I think this is what I was looking for "try increase diffusion by lowering hmax or increasing halpha"