Skip to content
This repository has been archived by the owner on Nov 10, 2021. It is now read-only.

Latest commit

 

History

History
70 lines (39 loc) · 3.11 KB

README.md

File metadata and controls

70 lines (39 loc) · 3.11 KB
Raw

DEPRECATION NOTICE

IMPORTANT: This repo has been replaced by the ros2 branch of the microstrain_inertial repo.

Description

This is the ROS2 Interface (driver) software for inertial sensors compatible with the Microstrain Communication Library (MSCL).

MSCL is developed by LORD Sensing - Microstrain in Williston, VT.

Build Instructions

MSCL

IMPORTANT: You will need to copy /usr/share/c++mscl/libmscl.so to /usr/lib manually for now as the ROS2 build environment cannot locate it. We are looking into this.

MSCL pre-built packages can be found here: MSCL Packages

We do our best to keep ROS2-MSCL up-to-date with the latest MSCL changes, but sometimes there is a delay. The currently supported version of MSCL is v62.0.0

Install instructions can be found here: How to Use MSCL

If you choose to install MSCL at a location other than /usr/share, CMakeLists.txt will need to be updated with the install path.

Building from source

  1. Install ROS2 and create a workspace: Configuring Your ROS2 Environment

  2. Move the entire ROS2-MSCL folder (ros_mscl and mscl_msgs) to the your_workspace/src directory.

  3. Build your workspace:

     cd ~/your_workspace
 colcon make
 source ~/your_workspace/install/setup.bash

    The source command may need to be run in each terminal prior to launching a ROS node.

Launch the node and publish data

The following command will launch the driver. Keep in mind each instance needs to be run in a separate terminal.

    ros2 launch ros2_mscl microstrain_launch.py

Some optional launch parameters:

  • name: namespace the node will publish messages to, default: gx5
  • port: serial port name to connect to the device over, default: /dev/ttyACM0
  • baudrate: baud rate to open the connection with, default: 115200
  • imu_rate: sample rate for IMU data (hz), default: 100

To check published topics:

ros2 topic list

This driver is implemented as a lifecycle node. Upon running, the node will be in the unconfigured state and no interaction has occurred with the device. The node must be transitioned as follows for data to be available:

  • transition to configure state:

      ros2 lifecycle set /gx5 configure

  • transition to active state:

      ros2 lifecycle set /gx5 activate

You can stop data from streaming by putting the device into the "deactivate" state. Both the "cleanup" and "shutdown" states will disconnect from the device and close the raw data log file (if enabled.)

License

ROS2-MSCL is released under the MIT License - see the LICENSE file in the source distribution.

Copyright (c) 2021, Parker Hannifin Corp.