Compilation

Compilation

Install the suggested base dependencies:

debian based

sudo apt-get install build-essential git-core cmake libssl-dev libx11-dev libxext-dev libxinerama-dev libxcursor-dev libxdamage-dev libxv-dev libxkbfile-dev libasound2-dev libcups2-dev libxml2 libxml2-dev

Building 1.0.1 or master requires:

sudo apt-get install libavutil-dev libavcodec-dev

rhel based

sudo yum install gcc cmake openssl-devel libX11-devel libXext-devel libXinerama-devel libXcursor-devel libXdamage-devel libXv-devel libxkbfile-devel alsa-lib-devel cups-devel ffmpeg-devel

Optionally, you can install the following dependencies:

debian based

sudo apt-get install libcunit1-dev libdirectfb-dev xmlto doxygen libxtst-dev

where cunit is for the unit tests, directfb is for dfreerdp, xmlto is for man pages, and doxygen for API documentation.

Generate makefiles:

cmake -DCMAKE_BUILD_TYPE=Debug -DWITH_SSE2=ON .

If you are using Eclipse, you can also generate Eclipse project files:

cmake -G "Eclipse CDT4 - Unix Makefiles" -DCMAKE_BUILD_TYPE=Debug -DWITH_SSE2=ON .

Build:

make

Install:

sudo make install

Now create /etc/ld.so.conf.d/freerdp.conf and add the following line to it:

/usr/local/lib/freerdp

For a 64-bit rhel based OS add:
/usr/local/lib64/freerdp

Depending on your OS/distribution, you may also need to add this line:

/usr/local/lib

Run ldconfig. You should now have xfreerdp installed in /usr/local/bin:

awake@envy:~$ which xfreerdp
/usr/local/bin/xfreerdp

Plugins are installed in /usr/local/lib/freerdp:

awake@envy:/usr/local/lib/freerdp$ ls
cliprdr.so  disk.so  drdynvc.so  printer.so  rail.so  rdpdbg.so  rdpdr.so  rdpsnd_alsa.so  rdpsnd.so

keymaps are installed in /usr/local/share/freerdp:

awake@envy:/usr/local/share/freerdp$ ls keymaps/
aliases  ataritt       empty  fujitsu  ibm        macosx    sony  xfree86  xkb.pl
amiga    digital_vndr  evdev  hp       macintosh  sgi_vndr  sun   xfree98

After launching FreeRDP at least once, ~/.freerdp will be created to store known hosts:

awake@envy:~/.freerdp$ ls
cacert  known_hosts

CA certificates can be added to ~/.freerdp/cacert for additional trusted CAs.

Mac OS X Specifics

The best way to install cmake is via homebrew.

To make a universal binary build, use:

cmake -D “CMAKE_OSX_ARCHITECTURES:STRING=i386;x86_64” .

FreeRDP is now available as a homebrew recipe.

brew install freerdp
sudo brew link freerdp

If you are interested in trying out multimedia redirection on a Mac, use the following steps:

To install ffmpeg with MacPorts:
sudo port install ffmpeg-devel

Here are working instructions for compiling ffmpeg on Mac OS X (tested on Mountain Lion):
http://www.martinlos.com/?p=41

If attempting to compile for media redirection on mac, and enabling ffmpeg using cmake, make sure ffmpeg configure is run with —arch=x86_64. For example, the following is a working configuration step before running make for ffmpeg:

./configure --enable-runtime-cpudetect --enable-libxvid --arch=x86_64 --disable-stripping --enable-gpl --enable-nonfree --cc=clang --extra-cflags="-I/sw64/include -m64" --extra-ldflags=-m64 --enable-libmp3lame --enable-libfaac --enable-shared --enable-static

Use the following steps for compiling and installing Pulseaudio:

sudo port install json-c
sudo port install gettext
sudo port install intltool
sudo port install speex
sudo port install libsndfile
sudo ./configure --with-udev-rules-dir=/usr/local/lib/udev/rules.d --with-mac-sysroot=/Applications/Xcode.app/Contents/Developer/Platforms/MacOSX.platform/Developer/SDKs/MacOSX10.8.sdk --with-mac-version-min=10.8
sudo make install

Compiling with Visual C++ 2010 Express
See this page

Cross-Compilation using Mingw-w64

FreeRDP can be compiled for Windows (32/64 Bit) on a Linux system using the Mingw cross-compilers. The following instruction was tested with Mingw-w64 2.0 and gcc-4.7 on Scientific Linux 6.1 (x64) but should work relatively independent of the Mingw/gcc version.

1. Install the Mingw-cross compilers (most Linux distros offer binary packages for Mingw in their repos). On older distros you may need to compile the latest version of Mingw from source. If you want to create 32 Bit binaries only, then Mingw32 is sufficient, otherwise you should install Mingw-w64.

2. Download the latest version of openssl (http://www.openssl.org/), compile it using the Mingw cross-compilers and install it. Instructions how to do this can be found on http://www.blogcompiler.com/.

3. Download FreeRDP and unpack the source archive. Create a subdirectory in the FreeRDP source tree called “mingw_build” where FreeRDP will be build. Open a terminal and goto this directory. Enter the command

cmake -DCMAKE_SYSTEM_NAME="Windows" \
      -DCMAKE_C_COMPILER="/opt/mingw64/bin/x86_64-w64-mingw32-gcc" \
      -DCMAKE_RC_COMPILER="/opt/mingw64/bin/x86_64-w64-mingw32-windres" \
      -DCMAKE_INSTALL_PREFIX="/opt/mingw64" \
      -DBUILD_SHARED_LIBS=OFF \
      -DCMAKE_C_FLAGS="-DFREERDP_EXPORTS -Dsprintf_s=snprintf" \
      -DCMAKE_EXE_LINKER_FLAGS="-L/opt/mingw64/lib" \
      -DWITH_SSE2=OFF \
      -DWITH_SSE2_TARGET=OFF \
      -DOPENSSL_INCLUDE_DIR="/opt/mingw64/include" \
      -DLIB_EAY="/opt/mingw64/lib/libcrypto.a" \
      -DSSL_EAY="/opt/mingw64/lib/libssl.a" \
      ..

This will configure FreeRDP for cross-compilation. Note that you need to adjust the paths according to your installation of Mingw and OpenSSL. Using the command above the wfreerdp.exe binary will be statically linked and can be executed on any Windows machine.

Note: You need a recent version of cmake (I used 2.8.7) as the logic in the FindOpenSSL cmake makro is broken (for cross-compilation) in older versions.

• Mac OS X with MacPorts