recipes-go: 3mdeb-rtectrl: flash.sh: add

Add flash.sh script from 3mdeb/RteCtrl#22. For more inf. check #80. Signed-off-by: Daniil Klimuk <[email protected]>
3mdeb · Nov 7, 2024 · 52c9645 · 52c9645
1 parent abdb99e
commit 52c9645
Show file tree

Hide file tree

Showing 2 changed files with 153 additions and 0 deletions.
diff --git a/recipes-go/3mdeb-rtectrl/3mdeb-rtectrl/flash.sh b/recipes-go/3mdeb-rtectrl/3mdeb-rtectrl/flash.sh
@@ -0,0 +1,148 @@
+#!/bin/sh
+
+errorExit() {
+  errorMessage="$1"
+  echo "$errorMessage"
+  exit 1
+}
+
+errorCheck() {
+  errorCode=$?
+  errorMessage="$1"
+  [ "$errorCode" -ne 0 ] && errorExit "$errorMessage : ($errorCode)"
+}
+
+usage() {
+  echo "${0} command [FILE]"
+  echo "Available commands:"
+  echo "  - probe - probe flash"
+  echo "  - read FILE - read flash to FILE"
+  echo "  - write FILE - write flash from FILE"
+  echo "For example:"
+  echo "${0} probe"
+  echo "${0} read flash.rom"
+  echo "${0} write flash.rom"
+  exit 0
+}
+
+SPI_DEV="/dev/spidev1.0"
+SPI_SPEED="16000"
+FLASHROM_PROGRAMMER="linux_spi:dev=$SPI_DEV,spispeed=$SPI_SPEED"
+
+CHIP_THINKPAD_SPI1="MX25L6406E/MX25L6408E"
+CHIP_THINKPAD_SPI2="MX25L3206E/MX25L3208E"
+CHIP_PROTECTLI_FW6="MX25L6436E/MX25L6445E/MX25L6465E"
+
+# FLASHROM_CHIP="-c $CHIP_PROTECTLI_FW6"
+
+WP_RANGE="0,0x00800000"
+
+[ $# -eq 0 ] && usage
+
+spiON() {
+  echo "set SPI Vcc to 3.3V"
+  # 0 - 1.8V   ,   1 - 3.3V
+  echo 1 > /sys/class/gpio/gpio517/value
+  sleep 1
+  echo "SPI lines ON"
+  echo 1 > /sys/class/gpio/gpio516/value
+  sleep 1
+  echo "SPI Vcc ON"
+  echo 1 > /sys/class/gpio/gpio518/value
+  sleep 2
+}
+
+spiOFF() {
+  echo "SPI Vcc OFF"
+  echo 0 > /sys/class/gpio/gpio518/value
+  echo "SPI lines OFF"
+  echo 0 > /sys/class/gpio/gpio516/value
+  echo 0 > /sys/class/gpio/gpio517/value
+}
+
+CMD="$1"
+FILE="$2"
+
+case "$CMD" in
+  "probe")
+    spiON
+    echo "Probing ..."
+    flashrom -p "$FLASHROM_PROGRAMMER" $FLASHROM_CHIP
+    sleep 1
+    spiOFF
+  ;;
+  "read")
+    [ -z "$FILE" ] && errorExit "FILE not given"
+    spiON
+    echo "Reading ..."
+    flashrom -p "$FLASHROM_PROGRAMMER" -r "$FILE" $FLASHROM_CHIP -V
+    sleep 1
+    spiOFF
+  ;;
+  "write")
+    [ -z "$FILE" ] && errorExit "FILE not given"
+    spiON
+    echo "Writing ..."
+    flashrom -p "$FLASHROM_PROGRAMMER" -w "$FILE" $FLASHROM_CHIP
+    sleep 1
+    spiOFF
+  ;;
+  "wp-list")
+    spiON
+    echo "Checking WP list ..."
+    flashrom -p "$FLASHROM_PROGRAMMER" --wp-list $FLASHROM_CHIP
+    sleep 1
+    spiOFF
+  ;;
+  "wp-status")
+    spiON
+    echo "Checking WP status ..."
+    flashrom -p "$FLASHROM_PROGRAMMER" --wp-status $FLASHROM_CHIP
+    sleep 1
+    spiOFF
+  ;;
+  "wp-enable")
+    spiON
+    echo "Setting WP region ..."
+    flashrom -p "$FLASHROM_PROGRAMMER" --wp-range="$WP_RANGE" $FLASHROM_CHIP
+    sleep 1
+    echo "Enabling WP region ..."
+    flashrom -p "$FLASHROM_PROGRAMMER" --wp-enable $FLASHROM_CHIP
+    sleep 1
+    spiOFF
+  ;;
+  "wp-disable")
+    spiON
+    echo "Disabling WP protection ..."
+    flashrom -p "$FLASHROM_PROGRAMMER" --wp-disable $FLASHROM_CHIP
+    sleep 1
+    echo "Clearing WP region ..."
+    flashrom -p "$FLASHROM_PROGRAMMER" --wp-range=0,0 $FLASHROM_CHIP
+    sleep 1
+    spiOFF
+  ;;
+  "erase")
+    spiON
+    echo "Erasing chip ..."
+    flashrom -p "$FLASHROM_PROGRAMMER" -E $FLASHROM_CHIP
+    sleep 1
+    spiOFF
+  ;;
+  "wp-high")
+    echo "Setting WP pin HIGH ..."
+    echo "out" > /sys/class/gpio/gpio514/direction
+    # deassert WP pin to disable hardware protection of status registers
+    echo "1" > /sys/class/gpio/gpio514/value
+  ;;
+  "wp-low")
+    echo "Setting WP pin LOW ..."
+    echo "out" > /sys/class/gpio/gpio514/direction
+    # assert WP pin to enable hardware protection of status registers
+    echo "0"  > /sys/class/gpio/gpio514/value
+  ;;
+  *)
+    echo "Command \"$CMD\" is not supported"
+    usage
+  ;;
+esac
+
diff --git a/recipes-go/3mdeb-rtectrl/3mdeb-rtectrl_git.bbappend b/recipes-go/3mdeb-rtectrl/3mdeb-rtectrl_git.bbappend
@@ -3,11 +3,13 @@ FILESEXTRAPATHS:prepend := "${THISDIR}/${PN}:"
 SRC_URI:append = " \
     file://RteCtrl.cfg \
     file://RteCtrl.service \
+    file://flash.sh \
     "
 
 FILES:${PN} += " \
     ${sysconfdir}/RteCtrl.cfg \
     ${systemd_unitdir}/system/RteCtrl.service \
+    ${sbindir}/flash.sh \
     "
 
 do_install:append() {
@@ -17,6 +19,9 @@ do_install:append() {
 
     install -d ${D}${systemd_unitdir}/system/
     install -m 0644 ${WORKDIR}/RteCtrl.service ${D}${systemd_unitdir}/system/
+
+    install -d ${D}${sbindir}
+    install -m 0755 ${WORKDIR}/flash.sh ${D}${sbindir}/
 }
 
 SYSTEMD_PACKAGES = "${PN}"